For other versions of OpenShift, follow the instructions in the corresponding branch e.g. ocp-3.7, origin-3.7, etc

CI/CD Demo - OpenShift Container Platform 3.7

This repository includes the infrastructure and pipeline definition for continuous delivery using Jenkins, Nexus, SonarQube and Eclipse Che on OpenShift.

Introduction
Prerequisites
Deploy on RHPDS
Deploy on OpenShift (script)
Deploy on OpenShift (manual)
Troubleshooting
Demo Guide
Using Eclipse Che for Editing Code

Introduction

On every pipeline execution, the code goes through the following steps:

Code is cloned from Gogs, built, tested and analyzed for bugs and bad patterns
The WAR artifact is pushed to Nexus Repository manager
A container image (tasks:latest) is built based on the Tasks application WAR artifact deployed on JBoss EAP 6
The Tasks container image is deployed in a fresh new container in DEV project
If tests successful, the DEV image is tagged with the application version (tasks:7.x) in the STAGE project
The staged image is deployed in a fresh new container in the STAGE project

The following diagram shows the steps included in the deployment pipeline:

The application used in this pipeline is a JAX-RS application which is available on GitHub and is imported into Gogs during the setup process: https://github.com/OpenShiftDemos/openshift-tasks

Prerequisites

8+ GB memory for OpenShift (10+ GB memory if using SonarQube)
JBoss EAP 7 imagestreams imported to OpenShift (see Troubleshooting section for details)

Deploy on RHPDS

If you have access to RHPDS, provisioning of this demo is automated via the service catalog under OpenShift Demos → OpenShift CI/CD for Monolith. If you don't know what RHPDS is, read the instructions in the next section.

Deploy on OpenShift (Script)

You can se the scripts/provision.sh script provided to deploy the entire demo:

./provision.sh --help
./provision.sh deploy --deploy-sonar --deploy-che --ephemeral
./provision.sh delete

Deploy on OpenShift (Manual)

Follow these instructions in order to create a local OpenShift cluster. Otherwise using your current OpenShift cluster, create the following projects for CI/CD components, Dev and Stage environments:

# Create Projects
oc new-project dev --display-name="Tasks - Dev"
oc new-project stage --display-name="Tasks - Stage"
oc new-project cicd --display-name="CI/CD"

# Grant Jenkins Access to Projects
oc policy add-role-to-user edit system:serviceaccount:cicd:jenkins -n dev
oc policy add-role-to-user edit system:serviceaccount:cicd:jenkins -n stage

OpenShift 3.7 by default uses an older version of Jenkins. Import a newer Jenkins image in order to use with this demo:

oc login -u system:admin
oc import-image jenkins:v3.7 --from="registry.access.redhat.com/openshift3/jenkins-2-rhel7" --confirm -n openshift
oc tag jenkins:v3.7 jenkins:latest -n openshift

You can choose to use either SonarQube for static code and security analysis or instead use Maven plugins and generated reports within the Jenkins:

# Deploy Pipeline with SonarQube
oc new-app -n cicd -f cicd-template.yaml

# Deploy Pipeline without SonarQube
oc new-app -n cicd -f cicd-template.yaml --param=WITH_SONAR=false

# Deploy Pipeline woth Eclipse Che
oc new-app -n cicd -f cicd-template.yaml --param=WITH_CHE=true

To use custom project names, change cicd, dev and stage in the above commands to your own names and use the following to create the demo:

oc new-app -n cicd -f cicd-template.yaml --param DEV_PROJECT=dev-project-name --param STAGE_PROJECT=stage-project-name

Troubleshooting

If pipeline execution fails with error: no match for "jboss-eap70-openshift", import the jboss imagestreams in OpenShift.

oc create -f https://raw.githubusercontent.com/jboss-openshift/application-templates/master/jboss-image-streams.json -n openshift

If Maven fails with /opt/rh/rh-maven33/root/usr/bin/mvn: line 9: 298 Killed (e.g. during static analysis), you are running out of memory and need more memory for OpenShift.

Demo Guide

A Jenkins pipeline is pre-configured which clones Tasks application source code from Gogs (running on OpenShift), builds, deploys and promotes the result through the deployment pipeline. In the CI/CD project, click on Builds and then Pipelines to see the list of defined pipelines.

Click on tasks-pipeline and Configuration and explore the pipeline definition.

You can also explore the pipeline job in Jenkins by clicking on the Jenkins route url, logging in with the OpenShift credentials and clicking on tasks-pipeline and Configure.
Run an instance of the pipeline by starting the tasks-pipeline in OpenShift or Jenkins.
During pipeline execution, verify a new Jenkins slave pod is created within CI/CD project to execute the pipeline.
Pipelines pauses at Deploy STAGE for approval in order to promote the build to the STAGE environment. Click on this step on the pipeline and then Promote.
After pipeline completion, demonstrate the following:

Explore the snapshots repository in Nexus and verify openshift-tasks is pushed to the repository
Explore SonarQube or pipeline in Jenkins and show the metrics, stats, code coverage, etc
Explore Tasks - Dev project in OpenShift console and verify the application is deployed in the DEV environment
Explore Tasks - Stage project in OpenShift console and verify the application is deployed in the STAGE environment

Clone and checkout the eap-7 branch of the openshift-tasks git repository and using an IDE (e.g. JBoss Developer Studio), remove the @Ignore annotation from src/test/java/org/jboss/as/quickstarts/tasksrs/service/UserResourceTest.java test methods to enable the unit tests. Commit and push to the git repo.
Check out Jenkins, a pipeline instance is created and is being executed. The pipeline will fail during unit tests due to the enabled unit test.
Check out the failed unit and test src/test/java/org/jboss/as/quickstarts/tasksrs/service/UserResourceTest.java and run it in the IDE.
Fix the test by modifying src/main/java/org/jboss/as/quickstarts/tasksrs/service/UserResource.java and uncommenting the sort function in getUsers method.
Run the unit test in the IDE. The unit test runs green.
Commit and push the fix to the git repository and verify a pipeline instance is created in Jenkins and executes successfully.

Using Eclipse Che for Editing Code

If you deploy the demo template using WITH_CHE=true paramter, or the deploy script and use --deploy-che flag, then an Eclipse Che instances will be deployed within the CI/CD project which allows you to use the Eclipse Che web-based IDE for editing code in this demo.

Here is a step-by-step guide for editing and pushing the code to the Gogs repository (step 6) using Eclipse Che.

Click on Eclipse Che route url in the CI/CD project which takes you to the workspace administration page. Select the Java stack and click on the Create button to create a workspace for yourself.

Once the workspace is created, click on Open button to open your workspace in the Eclipse Che in the browser.

It might take a little while before your workspace is set up and ready to be used in your browser. Once it's ready, click on Import Project... in order to import the openshift-tasks Gogs repository into your workspace.

Enter the Gogs repository HTTPS url for openshift-tasks as the Git repository url. You can find the repository url in Gogs web console. Make sure the check the Branch field and enter eap-7 in order to clone the eap-7 branch which is used in this demo. Click on Import

Change the project configuration to Maven and then click Save

Configure you name and email to be stamped on your Git commity by going to Profile > Preferences > Git > Committer.

Follow the steps 6-10 in the above guide to edit the code in your workspace.

In order to run the unit tests within Eclipse Che, wait till all dependencies resolve first. To make sure they are resolved, run a Maven build using the commands palette icon or by clicking on Run > Commands Palette > build.

Make sure you run the build again, after fixing the bug in the service class.

Run the unit tests in the IDE after you have corrected the issue by right clicking on the unit test class and then Run Test > Run JUnit Test

Click on Git > Commit to commit the changes to the openshift-tasks git repository. Make sure Push commited changes to ... is UNCHECKED. The Gogs git server deployed on your OpenShift cluster, does not support neither SSH or OAuth. Therefore, you should use the Terminal window in Eclipse Che in order to use push the changes via http to the Gogs repository.

Click on the Terminal window and push the changes to the upstream repository:

cd openshift-tasks
git push origin eap-7

Enter gogs/gogs as username and password.

z0x010 / openshift-cd-demo