본 repository는 meta에서 개발한 Llama 2를 잘 사용하기 위해 만들어진 'llama-recipes'를 한국어로 번역한 것입니다. Llama 2를 domain에 맞게 fine-tuing하고, tuning한 model을 inference하는 방법도 확인할 수 있습니다. Fine-tuning과 inference를 하기 위해서는 Hugging Face model로 바꾸는 것이 필요로 하며, 여기에서 방법을 확인할 수 있습니다.
대학원에서 LLM과 Multimodal 관련해서 연구하는데, 제가 본 레포지토리를 사용하면서 얻었던 경험을 공유하고 싶어서 한글화 하고 있습니다. (도움이 되었다면 star 좀 흑흑..)
이렇게 정리하는 것이 처음이라 궁금하거나, 이해가 안되는 부분 알려주시면 제가 경험해본 선에서 답변해드리겠습니다.
Llama 2모델은 상업적으로 사용하능하고, 더 자세한 부분은 Llama 2 repo를 확인해주세요.
- 시작하기
- Fine-tuning 하기
- Inference 하기
- Hugging face model로 변환하기
- Repository Organization
- License and Acceptable Use Policy
Llama 2 기초 jupyter notebook: Llama 2 model을 어떻게 fine-tuning하고 inference할 수 있는지 확인할 수 있는 notebook입니다. Fine-tuning은 samsum 이라는 대화를 요약하는 데이터셋으로 진행을 합니다. PEFT와 LoRA를 사용해서 GPU 메모리가 24GB일 경우 7B와 13B 모델을 파인튜닝 시킬 수 있습니다. 제가 실험한 환경은 RTX 3090 24GB 4대를 사용하였고, 13B model을 학습할 때 15GB 정도를 잡고 있고, 시간은 1시간 정도 걸린 것 같습니다.
Note All the setting defined in config files can be passed as args through CLI when running the script, there is no need to change from config files directly.
Note In case need to run PEFT model with FSDP, please make sure to use the PyTorch Nightlies.
For more in depth information checkout the following:
torch 버전 2.0.0 사용해야하므로, CUDA version은 11.7 이상을 사용해야합니다.
bitsandbytes는 torch 설치 후에 설치 해야지, 오류가 나지 않았습니다.(많은 경험 후에 알아낸...)
pip install torch==2.0.0+cu117 torchvision==0.15.1+cu117 torchaudio==2.0.1 --index-url https://download.pytorch.org/whl/cu117
pip install -r requirements.txt
For fine-tuning Llama 2 models for your domain-specific use cases recipes for PEFT, FSDP, PEFT+FSDP have been included along with a few test datasets. For details see LLM Fine-tuning.
If you want to dive right into single or multi GPU fine-tuning, run the examples below on a single GPU like A10, T4, V100, A100 etc. All the parameters in the examples and recipes below need to be further tuned to have desired results based on the model, method, data and task at hand.
Note:
-
To change the dataset in the commands below pass the
datasetarg. Current options for dataset aregrammar_dataset,alpaca_datasetandsamsum_dataset. A description of the datasets and how to add custom datasets can be found in Dataset.md. Forgrammar_dataset,alpaca_datasetplease make sure you use the suggested instructions from here to set them up. -
Default dataset and other LORA config has been set to
samsum_dataset. -
Make sure to set the right path to the model in the training config.
#if running on multi-gpu machine
export CUDA_VISIBLE_DEVICES=0
python llama_finetuning.py --use_peft --peft_method lora --quantization --model_name /patht_of_model_folder/7B --output_dir Path/to/save/PEFT/model
Here we make use of Parameter Efficient Methods (PEFT) as described in the next section. To run the command above make sure to pass the peft_method arg which can be set to lora, llama_adapter or prefix.
Note if you are running on a machine with multiple GPUs please make sure to only make one of them visible using export CUDA_VISIBLE_DEVICES=GPU:id
Make sure you set save_model in training.py to save the model. Be sure to check the other training settings in train config as well as others in the config folder as needed or they can be passed as args to the training script as well.
NOTE please make sure to use PyTorch Nightlies for using PEFT+FSDP. Also, note that int8 quantization from bit&bytes currently is not supported in FSDP.
torchrun --nnodes 1 --nproc_per_node 4 llama_finetuning.py --enable_fsdp --use_peft --peft_method lora --model_name /patht_of_model_folder/7B --pure_bf16 --output_dir Path/to/save/PEFT/model
Here we use FSDP as discussed in the next section which can be used along with PEFT methods. To make use of PEFT methods with FSDP make sure to pass use_peft and peft_method args along with enable_fsdp. Here we are using BF16 for training.
If you are interested in running full parameter fine-tuning without making use of PEFT methods, please use the following command. Make sure to change the nproc_per_node to your available GPUs. This has been tested with BF16 on 8xA100, 40GB GPUs.
torchrun --nnodes 1 --nproc_per_node 8 llama_finetuning.py --enable_fsdp --model_name /patht_of_model_folder/7B --dist_checkpoint_root_folder model_checkpoints --dist_checkpoint_folder fine-tuned
sbatch multi_node.slurm
# Change the num nodes and GPU per nodes in the script before running.
You can read more about our fine-tuning strategies here.
Meta 에서 다운로드 받은 llama 2 모델을 Hugging Face의 transformer 라이브러리를 사용하여 변환하는 방법입니다.
모델을 변환하면 좋은 이유에 대해서는 (추가 예정)
## Install HuggingFace Transformers from source
pip install git+https://github.com/huggingface/transformers
cd transformers
python src/transformers/models/llama/convert_llama_weights_to_hf.py \
--input_dir /path/to/downloaded/llama/weights --model_size 7B --output_dir models_hf/7BThis repository is organized in the following way:
configs: Contains the configuration files for PEFT methods, FSDP, Datasets.
docs: Example recipes for single and multi-gpu fine-tuning recipes.
ft_datasets: Contains individual scripts for each dataset to download and process. Note: Use of any of the datasets should be in compliance with the dataset's underlying licenses (including but not limited to non-commercial uses)
inference: Includes examples for inference for the fine-tuned models and how to use them safely.
model_checkpointing: Contains FSDP checkpoint handlers.
policies: Contains FSDP scripts to provide different policies, such as mixed precision, transformer wrapping policy and activation checkpointing along with any precision optimizer (used for running FSDP with pure bf16 mode).
utils: Utility files for:
-
train_utils.pyprovides training/eval loop and more train utils. -
dataset_utils.pyto get preprocessed datasets. -
config_utils.pyto override the configs received from CLI. -
fsdp_utils.pyprovides FSDP wrapping policy for PEFT methods. -
memory_utils.pycontext manager to track different memory stats in train loop.