RFDemo 《路由器就是开发板》 目录 第一篇 准备工作 10 |--1.前言 http://blog.csdn.net/aggresss/article/details/52304513 |--2.路由器选型 http://blog.csdn.net/aggresss/article/details/52332155 |--3.约定 http://blog.csdn.net/aggresss/article/details/52334837 |--4.jtag接口和TTL接线 http://blog.csdn.net/aggresss/article/details/52335714 |--5.Jlink调试路由器 http://blog.csdn.net/aggresss/article/details/52337449 |--6.Wiggler调试路由器 http://blog.csdn.net/aggresss/article/details/52347041 |--7.OpenOCD配置分析 http://blog.csdn.net/aggresss/article/details/52347142 |--8.RT3052F芯片分析 http://blog.csdn.net/aggresss/article/details/52374158 |--9.HG255d硬件分析 http://blog.csdn.net/aggresss/article/details/52431283 |--10.路由器调试之HelloWorld http://blog.csdn.net/aggresss/article/details/52454840 第二篇 U-Boot 分析和改装 10 |--11.U-Boot介绍 http://blog.csdn.net/aggresss/article/details/52573265 |--12.U-Boot工作原理和流程分析 http://blog.csdn.net/aggresss/article/details/52589805 |--13.U-Boot编译原理 http://blog.csdn.net/aggresss/article/details/52614234 |--14.U-Boot命令原理 http://blog.csdn.net/aggresss/article/details/52620822 |--15.MIPS汇编U-Boot从start.S开始 http://blog.csdn.net/aggresss/article/details/52623118 |--16.U-Boot TTL串口输出原理分析 http://blog.csdn.net/aggresss/article/details/52644957 |--17.U-Boot norflash 操作原理分析 http://blog.csdn.net/aggresss/article/details/52694051 |--18.U-Boot 网络原理分析 http://blog.csdn.net/aggresss/article/details/52712415 |--19.基于HG255d_U-Boot的uIP移植 http://blog.csdn.net/aggresss/article/details/52735742 |--20.U-Boot添加web failsafe功能 http://blog.csdn.net/aggresss/article/details/52743365 第三篇 OpenWrt 5 |--21.U-Boot启动OpenWrt实验 http://blog.csdn.net/aggresss/article/details/52752388 |--22.OpenWrt 原理和结构分析 http://blog.csdn.net/aggresss/article/details/52752529 |--23.基于hg255d的OpenWrt固件编译 http://blog.csdn.net/aggresss/article/details/52752554 |--24.OpenWrt ipk helloworld http://blog.csdn.net/aggresss/article/details/52753071 |--25.总结 http://blog.csdn.net/aggresss/article/details/52753089