Radxa is donating some free ROCK3 computing modules to open source hardware projects.
Send a new PR to this repository on GitHub, append your application table. Radxa team will review/ask questions/discuss about the project detail. If the project is interesting or welcomed by the community, we will approve it. Radxa Team will contact the developer for the further sample shipping&development etc.
Project Name: |
TBD |
CM3 Model: |
RM116-D1E8W |
Project Hardware: |
various boards |
Project Software: |
https://www.device.farm, https://github.com/device-farm |
Other Notes: |
DEVICE.FARM is a platform to deploy containerized services to IoT devices, similar to Balena. We need the board for testing before we publish them as supported. |
Project Name: |
OpenWRT support for CM3 + Radxa E23 |
CM3 Model: |
RM116-D1E0 |
Project Hardware: |
RM116-D1E0 + Radxa E23 |
Project Software: |
https://openwrt.org/ |
Other Notes: |
I would like to port Openwrt on CM3 + Radxa E23 carrier board |
Project Name: |
TBD |
CM3 Model: |
WiFi, eMMC, 4GB+ RAM preferred |
Project Hardware: |
Currently the RPi CM4 + LCD |
Project Software: |
Raspbian/Linux |
Other Notes: |
Project will be open sourced closer to going on sale, currently it's not public, details and photos can be shared privately. There is some tease photos here: https://twitter.com/arturo182/status/1364003299083624452 |
Project Name: |
Open-hardware driver for MSLA resin printers |
CM3 Model: |
WiFi, eMMC, 4GB+ RAM preferred, Radxa ROCK3 Compute Module IO Board strongly preferred (as it has LCD breakout) |
Project Hardware: |
Currently the RPi CM4 + LCD |
Project Software: |
Raspbian/Linux |
Other Notes: |
The project is currently in experimental state, I am working on Linux driver for current state-of-the-art LCDs featured on resin printers. However, these LCDs use 2x 4-lane MIPI interface, thus I am experimenting with multiplexing MIPI on Rpi CM4 (which sucks). This is why I am reaching out to you - as ROCK3 features 2x 4-lane MIPI! This is a killer feature for such a project. Just to give you context; the resin 3D printing is extremely limited a dominated by Chitusystems. They have terrible closed ecosystem, unlike the open ecosystem available for FDM printers. It is really hard for open project to start, as there is a big obstacle in driving high-resolution LCDs required for these printers. |
Project Name: |
NixOS |
CM3 Model: |
eMMC (>= 32 GB), WiFi (optional) |
Project Hardware: |
Radxa E23 Dual Ethernet Board |
Project Software: |
NixOS |
Other Notes: |
- |
Project Name: |
sataPi |
CM3 Model: |
any model, but a eMMC one + more ram will help me in future in other projects |
Project Hardware: |
PCB design still in progress |
Project Software: |
Debian flavoured distros |
Other Notes: |
sataPi is a project that aims to fill the empty sata bay slots from a pc case with computing power. Since it is inside a pc, the power will be delivered trough standard conectors in pcs like molex or sata power. Project will be fully opensource, and maybe there will be a kickstarter campaign for it. |
Project Name: |
Buildroot support for CM3 + Radxa E23 |
CM3 Model: |
RM116-D1E0 |
Project Hardware: |
RM116-D1E0 + Radxa E23 |
Project Software: |
https://buildroot.org/ |
Other Notes: |
Assuming basic Linux support exists |