This project is a top-to-bottom OpenVPN setup for Ubuntu on AWS, using Terraform to create the EC2 resources and security groups, and Ansible to setup VPN users.
In terms of server configuration, the heavy lifting for this project is mostly courtesy of the excellent Stouts.openvpn ansible role. What this repository does on top of that is:
- Pins both the Ansible role and the Ubuntu AMI at known-working versions (currently Ubuntu Trusty)
- Adds extra Ansible to forward everything from clients through the VPN
- Provides modular Terraform that sets up the AWS server/security groups to work with OpenVPN
- Provides a Makefile to help to execute both the Terraform and the Ansible and simplify injecting parameters from environment variables
Valid named AWS profiles should already be setup in your ~/.aws/credentials file. We'll assume in the rest of this guide that the profile you want to use is called MY_PROFILE.
You'll also need local copies of terraform, ansible, and jq. My (confirmed working) version info follows:
$ terraform --version
Terraform v0.9.11
$ ansible --version
ansible 2.3.2.0
$ jq --version
jq-1.5
Terraform builds infrastructure resources on clouds like AWS. It can be downloaded here or you could use docker. If you prefer docker, just set an appropriate bash alias before using the Makefile.
Ansible configures resources on clouds with certain system packages, files, etc. Installation is described in detail here, but for platforms that already have a python stack you can probably just run pip install -r requirements.txt in this directory.
Jq is a sed-like tool for parsing JSON from the command line. On OSX it can be installed with brew install jq
-
Edit the Makefile directly to change the primary VPN user's default username/password. Edit the ansible file openvpn.yml to add additional VPN users.
-
Afterwards, run
make vpnand answer when it asks for the named AWS profile to use. When this finishes an OpenVPN server will be setup and ready to go, so you just need to configure a client. -
As a VPN client, I recommend tunnelblick, where setup is especially easy. When step 2 above finished, you are left with several new files in the working directory which can be used to configure the client. Assuming you didn't change the
VPN_NAME, one of these files isdefault.ovpn. Simply drag the newdefault.ovpnfile onto the tunnelblick icon in the menubar and connect with the user/password you set in the Makefile. Done! You can verify your configuration by visiting a place like http://www.whatsmyip.org/.
This section is just a walk through of the individual steps you can run that make vpn would do magically for you. Follow this instead of the quickstart above if you want to understand more about what's going on.
-
Generate a new ssh-key for EC2/terraform:
$ make keypair
-
Set an environment variable that terraform will use for your AWS profile, and run
terraform planvia the Makefile. Inspect the plan and make sure it's what you expected.$ TF_VAR_aws_profile=MY_PROFILE make plan
-
Set an environment variable that terraform will use for your AWS profile, and run
terraform applyvia the Makefile. This will create an EC2 server on AWS, together with the security groups and rules you'll need to use OpenVPN.$ TF_VAR_aws_profile=MY_PROFILE make apply
-
Edit the Makefile directly to change the primary VPN user's default username/password. Edit the ansible file openvpn.yml to add additional VPN users. You can safely rerun the ansible provisioner as many times as you like to add/edit/remove VPN users (see the next step).
-
To reprovision the VPN server, use the command below. (The IP address of the host is determined automatically for you with the results of
terraform output)$ make reprovision
-
If you need to connect to the OpenVPN server itself, there's a make target for that which will use the correct ssh user/keys. (The IP address of the host is determined automatically for you with the results of
terraform output)$ make ssh
-
If you want to tear things down again, you can use
make plan-destroyto show the plan, andmake destroyto actually clean up.
A Makefile is provided in this project to call Terraform and Ansible consistently, and with consistent environment variables. Not everyone who reads/writes terraform can read/write Ansible and vice versa, so as a compromise I'm mostly trying to use the Makefile to get information into both systems rather than using Ansible to drive Terraform or Terraform to drive Ansible.
I've also chosen to do a "two stage" setup with resource creation/provision handled separately, rather than using ansible via terraform's local-exec provisioner. Reprovisioning in terraform is awkward at best, black magic at worst. See this discussion for some workarounds if this is intolerable for your use-case.
Terraform resources are also arranged as modules, partly just to demonstrate modules. Nevertheless this might be useful if you want to, for instance, eliminate bastions for multiple VPCs by instantiating multiple OpenVPN servers. Note that individual OpenVPN servers can also support multiple VPNs, but we use one by default.
There are a variety of ways to override things at the Terraform layer (i.e. AWS region etc) which can be potentially confusing. There's the vars.tf file where you can modify things directly by changing/adding defaults. There's also the TF_VAR_name trick, if you want to set values using environment variables. There's also the openvpn terraform module instantiation in main.tf which allows for overrides.
For overriding things at the OpenVPN configuration layer, things are simpler. Go have a close reading of the documentation for the Stouts.openvpn role, which does almost all the real work here anyway. Consider adding variables that it understands/supports. Otherwise, you can always just pile new Ansible into the openvpn.yml file to override cert files with your own uploads, etc.
Are welcome.