xxshady / ra-multiplex

share one rust-analyzer server instance between multiple LSP clients to save resources

ra-multiplex  

Multiplex server for rust-analyzer, allows multiple LSP clients (editor windows) to share a single rust-analyzer instance per cargo workspace.

How it works

ra-multiplex acts like rust-analyzer but only connects to a TCP socket at 127.0.0.1:27631 and pipes stdin and stdout through it.

Depending on the workspaceFolders provided by your editor during initialization it can reuse an already spawned rust-analyzer instance.

Because neither LSP nor rust-analyzer itself support multiple clients per server ra-multiplex intercepts the handshake process modifies IDs of requests & responses to track which response belongs to which client. Because not all messages can be tracked this way it drops some, notably it drops any requests from the server, this appears to not be a problem with coc-rust-analyzer in neovim but YMMV.

If you have any problems you're welcome to open issues on this repository.

How to use

Build the project with

$ cargo build --release

Run ra-multiplex in server mode, make sure that rust-analyzer is in your PATH:

$ which rust-analyzer
/home/user/.cargo/bin/rust-analyzer
$ target/release/ra-multiplex --help
share one rust-analyzer server instance between multiple LSP clients to save resources

Usage: ra-multiplex [COMMAND]

Commands:
  client  Connect to a ra-mux server [default]
  server  Start a ra-mux server
  help    Print this message or the help of the given subcommand(s)

Options:
  -h, --help     Print help
  -V, --version  Print version

ra-multiplex server can run as a systemd user service, see the example ra-mux.service.

Configure your editor to use ra-multiplex as rust-analyzer, for example for CoC in neovim edit ~/.config/nvim/coc-settings.json, add:

{
    "rust-analyzer.serverPath": "/path/to/ra-multiplex"
}

If your editor can connect to a language server via TCP you don't need to use the ra-multiplex client and connect directly to the server but you need to provide the same information as the proxy command would. See the example config for neovim for details.

Configuration

Configuration is stored in a TOML file in your system's default configuration directory, for example ~/.config/ra-multiplex/config.toml. If you're not sure where that is on your system starting ra-multiplex without a config file present will print a notice with the expected path.

Note that the configuration file is likely not necessary and ra-multiplex should be usable with all defaults.

Example configuration file:

# this is an example configuration file for ra-multiplex
#
# all configuration options here are set to their default value they'll have if
# they're not present in the file or if the config file is missing completely.

# time in seconds after which a rust-analyzer server instance with no clients
# connected will get killed to save system memory.
#
# you can set this option to `false` for infinite timeout
instance_timeout = 300 # after 5 minutes

# time in seconds how long to wait between the gc task checks for disconnected
# clients and possibly starts a timeout task. the value must be at least 1.
gc_interval = 10 # every 10 seconds

# ip address and port on which ra-multiplex-server listens
#
# the default "127.0.0.1" only allows connections from localhost which is
# preferred since the protocol doesn't worry about security.
# ra-multiplex-server expects the filesystem structure and contents to be the
# same on its machine as on ra-multiplex's machine. if you want to run the
# server on a different computer it's theoretically possible but at least for
# now you're on your own.
#
# ports below 1024 will typically require root privileges and should be
# avoided, the default was picked at random, this only needs to change if
# another application happens to collide with ra-multiplex.
listen = ["127.0.0.1", 27631] # localhost & some random unprivileged port

# ip address and port to which ra-multiplex will connect to
#
# this should usually just match the value of `listen`
connect = ["127.0.0.1", 27631] # same as `listen`

# default log filters
#
# RUST_LOG env variable overrides this option, both use the same syntax which
# is documented in the `env_logger` documentation here:
# <https://docs.rs/env_logger/0.9.0/env_logger/index.html#enabling-logging>
log_filters = "info"

Other LSP servers

By default ra-multiplex uses a rust-analyzer binary found in its $PATH as the server. This can be overridden using the --server-path cli option with the client subcommand or RA_MUX_SERVER environment variable. You can usually configure one of these in your editor configuration. If both are specified the cli option overrides the environment variable.

For example with coc-clangd in CoC for neovim add to ~/.config/nvim/coc-settings.json:

{
    "clangd.path": "/home/user/.cargo/bin/ra-multiplex",
    "clangd.arguments": ["client", "--server-path", "/usr/bin/clangd"]
}

Or to set a custom path for rust-analyzer with coc-rust-analyzer add to ~/.config/nvim/coc-settings.json:

{
    "rust-analyzer.server.path": "/home/user/.cargo/bin/ra-multiplex",
    "rust-analyzer.server.extraEnv": { "RA_MUX_SERVER": "/custom/path/rust-analyzer" }
}

If your editor configuration or plugin doesn't allow to add either you can instead create a wrapper shell script and set it as the server path directly. For example if coc-clangd didn't allow to pass additional arguments you'd need a script like /usr/local/bin/clangd-proxy:

#!/bin/sh
RA_MUX_SERVER=/usr/bin/clangd exec /home/user/.cargo/bin/ra-multiplex client --server-path /usr/bin/clangd $@

And configure the editor to use the wrapper script in ~/.config/nvim/coc-settings.json:

{
    "clangd.path": "/usr/local/bin/clangd-proxy"
}