xtls2 / tun2socks

A tun2socks implementation powered by gVisor TCP/IP stack. 一个由gVisor的TCP/IP网络栈强力驱动的tun2socks实现。

tun2socks

A tun2socks powered by gVisor TCP/IP stack.

Features

• ICMP echoing
• IPv6 support
• Optimized UDP transmission for game acceleration
• Pure Go implementation, no more CGO required
• Router mode, routing all the traffic in LAN
• Socks5, Shadowsocks protocol support for remote connections
• TCP/IP stack powered by gVisor
• Up to 2.5Gbps throughput (10x faster than v1)

Requirements

Target	Minimum	Recommended
System	linux darwin freebsd openbsd	linux
Memory	>20MB	>128MB
CPU	amd64 arm64	amd64

Performance

iPerf3 tested on Debian 10 with i5-10500, 8G RAM

How to Build

build from source code

Go compiler version >= 1.15 is required

$ git clone https://github.com/xjasonlyu/tun2socks.git
$ cd tun2socks
$ make

build docker image

$ docker build -t tun2socks .

or

$ docker build -t tun2socks -f .Dockerfile.aarch64 .

QuickStart

Download from precompiled Releases.

With Docker

Since Go 1.12, the runtime now uses MADV_FREE to release unused memory on linux. This is more efficient but may result in higher reported RSS. The kernel will reclaim the unused data when it is needed. To revert to the Go 1.11 behavior (MADV_DONTNEED), set the environment variable GODEBUG=madvdontneed=1.

create docker network (macvlan mode)

docker network create -d macvlan \
  --subnet=172.20.1.0/25 \
  --gateway=172.20.1.1 \
  -o parent=eth0 \
  switch

pull tun2socks docker image

docker pull xjasonlyu/tun2socks:latest

run as gateway

DNS configuration is required.

docker run -d \
  --network switch \
  --name tun2socks \
  --ip 172.20.1.2 \
  --privileged \
  --restart always \
  --sysctl net.ipv4.ip_forward=1 \
  -e PROXY=socks5://server:port \
  -e KEY=VALUE... \
  xjasonlyu/tun2socks:latest

use docker-compose (recommended)

version: '2.4'

services:
  tun2socks:
    image: xjasonlyu/tun2socks:latest
    cap_add:
      - NET_ADMIN
    devices:
        - '/dev/net/tun:/dev/net/tun'
    environment:
      # - GODEBUG=madvdontneed=1
      - PROXY=socks5://server:port
      - LOGLEVEL=INFO
      - API=api://:8080
      - DNS=dns://:53
      - HOSTS=localhost=127.0.0.1,router.local=172.20.1.1
      - EXCLUDED=1.1.1.1,1.0.0.1
      - EXTRACMD=
    networks:
      switch:
        ipv4_address: 172.20.1.2
    restart: always
    container_name: tun2socks

networks:
  switch:
    name: switch
    ipam:
      driver: default
      config:
        - subnet: '172.20.1.0/25'
          gateway: 172.20.1.1
    driver: macvlan
    driver_opts:
      parent: eth0

With Linux

create tun

ip tuntap add mode tun dev tun0
ip addr add 198.18.0.1/15 dev tun0
ip link set dev tun0 up

config policy routing

echo "100 tun2socks" >> /etc/iproute2/rt_tables

ip route add default via 198.18.0.1 dev tun0 table tun2socks
ip route add 172.17.0.0/16 dev eth0 src 172.17.0.3 table tun2socks
ip route add 198.18.0.0/15 dev tun0 src 198.18.0.1 table tun2socks

ip rule add from 172.20.0.3 to 198.18.0.0/15 priority 1000 prohibit
ip rule add from 172.20.0.3 priority 2000 table main
ip rule add from all priority 3000 table tun2socks

run

bind to a specific interface to prevent traffic looping.

./tun2socks --loglevel info --device tun://tun0 --proxy socks5://server:port --interface eth0

With MacOS

start tun2socks

./tun2socks --loglevel info --device tun://utun123 --proxy socks5://server:port --interface eth0

config interface

sudo ifconfig utun123 198.18.0.1 netmask 255.255.255.255 198.18.0.1 up

config route

sudo route del default
sudo route add default 198.18.0.1
sudo route add ${proxy_server_ip} ${your_gateway}

check route table

netstat -nr

With Script

entrypoint.sh would take care of tun & routes.

PROXY=socks5://server:port LOGLEVEL=INFO sh ./scripts/entrypoint.sh

Details

API Reference

Path	Methods	Parameters	Description
/logs	GET	level	Get real-time logs
/traffic	GET	/	Get real-time traffic data
/version	GET	/	Get current version
/connections	GET	interval	Get all connections
/connections	DELETE	/	Close all connections
/connections/{id}	DELETE	/	Close connection by id

Help Text

NAME:
   tun2socks - A tun2socks powered by gVisor TCP/IP stack.

USAGE:
   tun2socks [global options] [arguments...]

GLOBAL OPTIONS:
   --api value                  URL of external API to listen
   --device value, -d value     URL of device to open
   --dns value                  URL of fake DNS to listen
   --hosts value                Extra hosts mapping
   --interface value, -i value  Bind interface to dial
   --loglevel value, -l value   Set logging level (default: "INFO")
   --proxy value, -p value      URL of proxy to dial
   --version, -v                Print current version (default: false)
   --help, -h                   show help (default: false)

Proxy URL

Protocol	Scheme	Examples
direct	direct	direct://
socks5	socks5	socks5://username:password@server:port
shadowsocks	ss, shadowsocks	ss://method:password@server:port

Credits

• Dreamacro/clash
• google/gvisor
• majek/slirpnetstack
• WireGuard/wireguard-go

Known Issues

Due to the implementation of pure Go, the memory usage is higher than the previous version. If you are sensitive to memory, please go back to v1.

TODO

• Windows support
• FreeBSD support
• OpenBSD support