RaspPiPictureFrame

A digital picture frame for the Raspberry Pi 3.

This is a rewrite of PiPictureFrame using modern versions of Dotnet.

Install Instructions

Dependencies to install

Download the following packages from your package manager after setting up a Raspberry Pi.

pqiv (Required for rendering images to the screen).
matchbox-keyboard (Optional: useful for touchscreen, however).
xscreensaver (To prevent the screen from turning off).
- After installing, go to the Menu button on the desktop -> Preferences -> Screensaver. Under the "Display Modes: tab, and under the "Mode" drop down, select "Disable Screen Saver". A reboot may be required.
nginx (Optional: Only needed if configuring reverse proxy).

Autologin

This is how to auto-login to the desktop so the user can start the frame:

Edit /etc/lightdm/lightdm.conf

This should be there by default if on a Raspberry Pi, but if its not:

"autologin-user=userName"

Configuring Raspberry Pi Touch Screen

By default, if using a Raspberry Pi, we look for the brightness and power files inside of /sys/class/backlight/rpi_backlight. If, instead, 10-10045 shows up instead of rpi_backlight in that path, you may need to configure the config.txt file in /boot. Comment out the following lines, especially if on a Raspberry Pi 3:

dtoverlay=vc4-kms-v3d
max_framebuffers=2

Otherwise, sometimes at boot, the screen may stay blank.

Security

Force key login for SSH:

Edit /etc/ssh/sshd_config

PermitRootLogin no
PasswordAuthentication no
Port XXXX  # Change port if desired

Disable Bluetooth:

Add the following line to /boot/config.txt

dtoverlay=disable-bt

Setting up Reverse Proxy (optional)

It is recommended to run RaspPiPictureFrame as the user that is automatically logged-in. This usually is not the root user. To connect to the RaspPiPictureFrame via a web browser, one could set a port and could connect to http://RaspPiPictureFrame:9001 (this can be done by setting the --urls command line argument to --urls=http://*9001). However, if you do not want to specify a port, you need to have the RaspPiPictureFrame web server run on port 80. Usually, only root is able to use port 80. However, you can setup a reverse proxy to make it so you can access the web browser control while not running RaspPiPictureFrame as root.

Install nginx with sudo apt install nginx
Enable the nginx daemon with sudo systemctl enable nginx
Run sudo nano /etc/nginx/sites-enabled/RaspPiPictureFrame to edit the nginx configuration.

Paste in the below configuration:

server {
  listen        80;
  server_name _;
  location / {
      proxy_pass         http://localhost:9001;
      proxy_http_version 1.1;
      proxy_set_header   Upgrade $http_upgrade;
      proxy_set_header   Connection keep-alive;
      proxy_set_header   Host $host;
      proxy_cache_bypass $http_upgrade;
      proxy_set_header   X-Forwarded-For $proxy_add_x_forwarded_for;
      proxy_set_header   X-Forwarded-Proto $scheme;
  }
}

When starting RaspPiPictureFrame, ensure the --urls argument's port matches the port number above. If using the above configuration, invoke --urls=http://localhost:9001.

Running

All non-user-configurable settings are set on the command line. Since this is running ASP.Net Core, all of their command line arguments are also valid. Here are the command-line arguments that are most important.

--help - Prints the help message and exits.
--print_license - Prints the license and exits.
--print_readme - Prints this document and exits.
--print_credits - Prints the third-party licenses and exits.
--version - Prints the version and exits.
--picture_directory=xxx - Sets the directory of where to find and upload pictures to xxx. If not specified, this is defaulted the Pictures directory in your home directory.
--urls= - This is an ASP.Net argument. This setting says who is allowed to connect to the web interface, and the port number. To allow all incoming connections on port 9001, for example, set this to --urls=http://*:9001. To restrict only internal connections on port 9001 (e.g. when using a reverse proxy), set this to --urls=http://localhost:9001. See Microsoft's documentation here for more information about this argument.
--rpi_backlight_brightness_file=xxx - If, for some reason, the rpi_backlight/brightness file in /sys/class changes, override this argument to point to the new file so we can adjust the brightness.
--rpi_backlight_power_file=xxx - If, for some reason, the rpi_backlight/bl_power file in /sys/class changes, override this argument to point to the new file so we can turn the screen on and off.

xforever1313 / RaspPiPictureFrame