glider is a forward proxy with multiple protocols support, and also a dns/dhcp server with ipset management features(like dnsmasq).
we can set up local listeners as proxy servers, and forward requests to internet via forwarders.
|Forwarder ----------------->|
Listener --> | | Internet
|Forwarder --> Forwarder->...|
- Act as both proxy client and proxy server(protocol converter)
- Flexible proxy & protocol chains
- Load balancing with the following scheduling algorithm:
- rr: round robin
- ha: high availability
- lha: latency based high availability
- dh: destination hashing
- Rule & priority based forwarder choosing: Config Examples
- DNS forwarding server:
- dns over proxy
- force upstream querying by tcp
- association rules between dns and forwarder choosing
- association rules between dns and ipset
- dns cache support
- custom dns record
- IPSet management (linux kernel version >= 2.6.32):
- add ip/cidrs from rule files on startup
- add resolved ips for domains from rule files by dns forwarding server
- Serve http and socks5 on the same port
- Periodical availability checking for forwarders
- Send requests from specific local ip/interface
- Services:
- dhcpd: a simple dhcp server that can run in failover mode
click to see details
Protocol | Listen/TCP | Listen/UDP | Forward/TCP | Forward/UDP | Description |
---|---|---|---|---|---|
Mixed | √ | √ | http+socks5 server | ||
HTTP | √ | √ | client & server | ||
SOCKS5 | √ | √ | √ | √ | client & server |
SS | √ | √ | √ | √ | client & server |
Trojan | √ | √ | √ | √ | client & server |
Trojanc | √ | √ | √ | √ | trojan cleartext(without tls) |
VLESS | √ | √ | √ | √ | client & server |
VMess | √ | √ | client only | ||
SSR | √ | client only | |||
SSH | √ | client only | |||
SOCKS4 | √ | client only | |||
SOCKS4A | √ | client only | |||
TCP | √ | √ | tcp tunnel client & server | ||
UDP | √ | √ | udp tunnel client & server | ||
TLS | √ | √ | transport client & server | ||
KCP | √ | √ | transport client & server | ||
Unix | √ | √ | √ | √ | transport client & server |
Smux | √ | √ | transport client & server | ||
Websocket(WS) | √ | √ | transport client & server | ||
WS Secure | √ | √ | websocket secure (wss) | ||
Proxy Protocol | √ | version 1 server only | |||
Simple-Obfs | √ | transport client only | |||
Redir | √ | linux redirect proxy | |||
Redir6 | √ | linux redirect proxy(ipv6) | |||
Tproxy | √ | linux tproxy(udp only) | |||
Reject | √ | √ | reject all requests |
- Binary: https://github.com/nadoo/glider/releases
- Docker:
docker pull nadoo/glider
- ArchLinux:
sudo pacman -S glider
glider -config CONFIG_PATH
glider -verbose -listen :8443 -forward SCHEME://HOST:PORT
glider -help
Usage: glider [-listen URL]... [-forward URL]... [OPTION]...
e.g. glider -config /etc/glider/glider.conf
glider -listen :8443 -forward socks5://serverA:1080 -forward socks5://serverB:1080 -verbose
OPTION:
-check string
check=tcp[://HOST:PORT]: tcp port connect check
check=http://HOST[:PORT][/URI][#expect=REGEX_MATCH_IN_RESP_LINE]
check=https://HOST[:PORT][/URI][#expect=REGEX_MATCH_IN_RESP_LINE]
check=file://SCRIPT_PATH: run a check script, healthy when exitcode=0, env vars: FORWARDER_ADDR,FORWARDER_URL
check=disable: disable health check (default "http://www.msftconnecttest.com/connecttest.txt#expect=200")
-checkdisabledonly
check disabled fowarders only
-checkinterval int
fowarder check interval(seconds) (default 30)
-checklatencysamples int
use the average latency of the latest N checks (default 10)
-checktimeout int
fowarder check timeout(seconds) (default 10)
-checktolerance int
fowarder check tolerance(ms), switch only when new_latency < old_latency - tolerance, only used in lha mode
-config string
config file path
-dialtimeout int
dial timeout(seconds) (default 3)
-dns string
local dns server listen address
-dnsalwaystcp
always use tcp to query upstream dns servers no matter there is a forwarder or not
-dnscachelog
show query log of dns cache
-dnscachesize int
max number of dns response in CACHE (default 4096)
-dnsmaxttl int
maximum TTL value for entries in the CACHE(seconds) (default 1800)
-dnsminttl int
minimum TTL value for entries in the CACHE(seconds)
-dnsnoaaaa
disable AAAA query
-dnsrecord value
custom dns record, format: domain/ip
-dnsserver value
remote dns server address
-dnstimeout int
timeout value used in multiple dnsservers switch(seconds) (default 3)
-example
show usage examples
-forward value
forward url, see the URL section below
-include value
include file
-interface string
source ip or source interface
-listen value
listen url, see the URL section below
-logflags int
do not change it if you do not know what it is, ref: https://pkg.go.dev/log#pkg-constants (default 19)
-maxfailures int
max failures to change forwarder status to disabled (default 3)
-relaytimeout int
relay timeout(seconds)
-rulefile value
rule file path
-rules-dir string
rule file folder
-scheme string
show help message of proxy scheme, use 'all' to see all schemes
-service value
run specified services, format: SERVICE_NAME[,SERVICE_CONFIG]
-strategy string
rr: Round Robin mode
ha: High Availability mode
lha: Latency based High Availability mode
dh: Destination Hashing mode (default "rr")
-tcpbufsize int
tcp buffer size in Bytes (default 32768)
-udpbufsize int
udp buffer size in Bytes (default 2048)
-verbose
verbose mode
URL:
proxy: SCHEME://[USER:PASS@][HOST]:PORT
chain: proxy,proxy[,proxy]...
e.g. -listen socks5://:1080
-listen tls://:443?cert=crtFilePath&key=keyFilePath,http:// (protocol chain)
e.g. -forward socks5://server:1080
-forward tls://server.com:443,http:// (protocol chain)
-forward socks5://serverA:1080,socks5://serverB:1080 (proxy chain)
SCHEME:
listen : http kcp mixed pxyproto redir redir6 smux sni socks5 ss tcp tls tproxy trojan trojanc udp unix vless ws wss
forward: direct http kcp reject simple-obfs smux socks4 socks4a socks5 ss ssh ssr tcp tls trojan trojanc udp unix vless vmess ws wss
Note: use 'glider -scheme all' or 'glider -scheme SCHEME' to see help info for the scheme.
--
Forwarder Options: FORWARD_URL#OPTIONS
priority : the priority of that forwarder, the larger the higher, default: 0
interface: the local interface or ip address used to connect remote server.
e.g. -forward socks5://server:1080#priority=100
-forward socks5://server:1080#interface=eth0
-forward socks5://server:1080#priority=100&interface=192.168.1.99
Services:
dhcpd: service=dhcpd,INTERFACE,START_IP,END_IP,LEASE_MINUTES[,MAC=IP,MAC=IP...]
service=dhcpd-failover,INTERFACE,START_IP,END_IP,LEASE_MINUTES[,MAC=IP,MAC=IP...]
e.g. service=dhcpd,eth1,192.168.1.100,192.168.1.199,720
--
Help:
glider -help
glider -scheme all
glider -example
see README.md and glider.conf.example for more details.
--
glider 0.16.0, https://github.com/nadoo/glider (glider.proxy@gmail.com)
glider -scheme all
Http scheme:
http://[user:pass@]host:port
--
KCP scheme:
kcp://CRYPT:KEY@host:port[?dataShards=NUM&parityShards=NUM&mode=MODE]
Available crypt types for KCP:
none, sm4, tea, xor, aes, aes-128, aes-192, blowfish, twofish, cast5, 3des, xtea, salsa20
Available modes for KCP:
fast, fast2, fast3, normal, default: fast
--
Simple-Obfs scheme:
simple-obfs://host:port[?type=TYPE&host=HOST&uri=URI&ua=UA]
Available types for simple-obfs:
http, tls
--
Smux scheme:
smux://host:port
--
Socks4 scheme:
socks4://host:port
--
Socks5 scheme:
socks5://[user:pass@]host:port
--
SS scheme:
ss://method:pass@host:port
Available methods for ss:
AEAD Ciphers:
AEAD_AES_128_GCM AEAD_AES_192_GCM AEAD_AES_256_GCM AEAD_CHACHA20_POLY1305 AEAD_XCHACHA20_POLY1305
Stream Ciphers:
AES-128-CFB AES-128-CTR AES-192-CFB AES-192-CTR AES-256-CFB AES-256-CTR CHACHA20-IETF XCHACHA20 CHACHA20 RC4-MD5
Alias:
chacha20-ietf-poly1305 = AEAD_CHACHA20_POLY1305, xchacha20-ietf-poly1305 = AEAD_XCHACHA20_POLY1305
Plain: NONE
--
SSH scheme:
ssh://user[:pass]@host:port[?key=keypath&timeout=SECONDS]
timeout: timeout of ssh handshake and channel operation, default: 5
--
SSR scheme:
ssr://method:pass@host:port?protocol=xxx&protocol_param=yyy&obfs=zzz&obfs_param=xyz
--
TLS client scheme:
tls://host:port[?serverName=SERVERNAME][&skipVerify=true][&cert=PATH][&alpn=proto1][&alpn=proto2]
Proxy over tls client:
tls://host:port[?skipVerify=true][&serverName=SERVERNAME],scheme://
tls://host:port[?skipVerify=true],http://[user:pass@]
tls://host:port[?skipVerify=true],socks5://[user:pass@]
tls://host:port[?skipVerify=true],vmess://[security:]uuid@?alterID=num
TLS server scheme:
tls://host:port?cert=PATH&key=PATH[&alpn=proto1][&alpn=proto2]
Proxy over tls server:
tls://host:port?cert=PATH&key=PATH,scheme://
tls://host:port?cert=PATH&key=PATH,http://
tls://host:port?cert=PATH&key=PATH,socks5://
tls://host:port?cert=PATH&key=PATH,ss://method:pass@
--
Trojan client scheme:
trojan://pass@host:port[?serverName=SERVERNAME][&skipVerify=true][&cert=PATH]
trojanc://pass@host:port (cleartext, without TLS)
Trojan server scheme:
trojan://pass@host:port?cert=PATH&key=PATH[&fallback=127.0.0.1]
trojanc://pass@host:port[?fallback=127.0.0.1] (cleartext, without TLS)
--
Unix domain socket scheme:
unix://path
--
VLESS scheme:
vless://uuid@host:port[?fallback=127.0.0.1:80]
--
VMess scheme:
vmess://[security:]uuid@host:port[?alterID=num]
if alterID=0 or not set, VMessAEAD will be enabled
Available security for vmess:
zero, none, aes-128-gcm, chacha20-poly1305
--
Websocket client scheme:
ws://host:port[/path][?host=HOST][&origin=ORIGIN]
wss://host:port[/path][?serverName=SERVERNAME][&skipVerify=true][&cert=PATH][&host=HOST][&origin=ORIGIN]
Websocket server scheme:
ws://:port[/path][?host=HOST]
wss://:port[/path]?cert=PATH&key=PATH[?host=HOST]
Websocket with a specified proxy protocol:
ws://host:port[/path][?host=HOST],scheme://
ws://host:port[/path][?host=HOST],http://[user:pass@]
ws://host:port[/path][?host=HOST],socks5://[user:pass@]
TLS and Websocket with a specified proxy protocol:
tls://host:port[?skipVerify=true][&serverName=SERVERNAME],ws://[@/path[?host=HOST]],scheme://
tls://host:port[?skipVerify=true],ws://[@/path[?host=HOST]],http://[user:pass@]
tls://host:port[?skipVerify=true],ws://[@/path[?host=HOST]],socks5://[user:pass@]
tls://host:port[?skipVerify=true],ws://[@/path[?host=HOST]],vmess://[security:]uuid@?alterID=num
glider -example
Examples:
glider -config glider.conf
-run glider with specified config file.
glider -listen :8443 -verbose
-listen on :8443, serve as http/socks5 proxy on the same port, in verbose mode.
glider -listen socks5://:1080 -listen http://:8080 -verbose
-multiple listeners: listen on :1080 as socks5 proxy server, and on :8080 as http proxy server.
glider -listen :8443 -forward direct://#interface=eth0 -forward direct://#interface=eth1
-multiple forwarders: listen on 8443 and forward requests via interface eth0 and eth1 in round robin mode.
glider -listen tls://:443?cert=crtFilePath&key=keyFilePath,http:// -verbose
-protocol chain: listen on :443 as a https(http over tls) proxy server.
glider -listen http://:8080 -forward socks5://serverA:1080,socks5://serverB:1080
-proxy chain: listen on :8080 as a http proxy server, forward all requests via forward chain.
glider -listen :8443 -forward socks5://serverA:1080 -forward socks5://serverB:1080#priority=10 -forward socks5://serverC:1080#priority=10
-forwarder priority: serverA will only be used when serverB and serverC are not available.
glider -listen tcp://:80 -forward tcp://serverA:80
-tcp tunnel: listen on :80 and forward all requests to serverA:80.
glider -listen udp://:53 -forward socks5://serverA:1080,udp://8.8.8.8:53
-udp tunnel: listen on :53 and forward all udp requests to 8.8.8.8:53 via remote socks5 server.
glider -verbose -listen -dns=:53 -dnsserver=8.8.8.8:53 -forward socks5://serverA:1080 -dnsrecord=abc.com/1.2.3.4
-dns over proxy: listen on :53 as dns server, forward to 8.8.8.8:53 via socks5 server.
- dhcpd / dhcpd-failover:
- service=dhcpd,INTERFACE,START_IP,END_IP,LEASE_MINUTES[,MAC=IP,MAC=IP...]
- service=dhcpd,eth1,192.168.1.100,192.168.1.199,720,fc:23:34:9e:25:01=192.168.1.101
- service=dhcpd-failover,eth2,192.168.2.100,192.168.2.199,720
- note:
dhcpd-failover
only serves requests when there's no other dhcp server exists in lan- detect interval: 1min
- service=dhcpd,INTERFACE,START_IP,END_IP,LEASE_MINUTES[,MAC=IP,MAC=IP...]
-
systemd: https://github.com/nadoo/glider/blob/master/systemd/
-
docker: click to see details
- run glider (config file path: /etc/glider/glider.conf)
docker run -d --name glider --net host --restart=always \ -v /etc/glider:/etc/glider \ nadoo/glider -config=/etc/glider/glider.conf
- run watchtower (if you need auto update for glider)
docker run -d --name watchtower --restart=always \ -v /var/run/docker.sock:/var/run/docker.sock \ containrrr/watchtower --interval 21600 --cleanup \ glider
- open udp ports (if you need udp nat fullcone)
iptables -I INPUT -p udp -m udp --dport 1024:65535 -j ACCEPT
- run glider (config file path: /etc/glider/glider.conf)
You can customize and build glider if you want a smaller binary (click to see details)
- Clone the source code:
git clone https://github.com/nadoo/glider && cd glider
- Customize features:
open `feature.go` & `feature_linux.go`, comment out the packages you don't need
// _ "github.com/nadoo/glider/proxy/kcp"
- Build it(requires Go 1.18+ )
go build -v -ldflags "-s -w"
In glider, you can easily chain several proxy servers or protocols together (click to see details)
-
Chain proxy servers:
forward=http://1.1.1.1:80,socks5://2.2.2.2:1080,ss://method:pass@3.3.3.3:8443@
-
Chain protocols: https proxy (http over tls)
forward=tls://server.com:443,http://
-
Chain protocols: vmess over ws over tls
forward=tls://server.com:443,ws://,vmess://5a146038-0b56-4e95-b1dc-5c6f5a32cd98@?alterID=2
-
Chain protocols and servers:
forward=socks5://1.1.1.1:1080,tls://server.com:443,vmess://5a146038-0b56-4e95-b1dc-5c6f5a32cd98@?alterID=2
-
Chain protocols in listener: https proxy server
listen=tls://:443?cert=crtFilePath&key=keyFilePath,http://
-
Chain protocols in listener: http over smux over websocket proxy server
listen=ws://:10000,smux://,http://