Giters

wxthon / NVIDIA-Jetson-IMX477-RPIV3

NVIDIA Jetson IMX477 HQ RPI V3 camera driver

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

NVIDIA Jetson IMX477 HQ RPI V3 camera driver

This driver has been developed by NVIDIA Corporation, RidgeRun Engineering and Leopard Imaging Inc. as a collaborative initiative in order to release the first version of the Sony IMX477 sensor driver for the Raspberry Pi HQ camera.

Supports the following Jetson platforms:

  • Jetson Xavier NX
  • Jetson Nano

Repository structure

In this repository you will find the following structure:

.
├── li-camera-calibration-files
│   └── camera_overrides.isp
├── patches_nano
│   ├── 4.5_nano_imx477-v0.1.0.patch
│   └── series
├── patches_nx
│   ├── 4.5_nx_imx477-v0.1.0.patch
│   └── series
└── README.md

where:

  • 4.5_*_imx477-v0.1.0.patch is the patch to be applied on the JetPack 4.5 sources in order to add support for the IMX477 camera sensor in the Jetson Xavier NX and Jetson Nano.
  • series is a file containing the patch name in order to apply it by using the quilt tool.
  • camera_overrides.isp is a file which contains a set of calibration parameters for the Image Signal Processor of the HQ camera.

JetPack installation instructions

You can download and install the JetPack by following the instructions below:

Driver Installation instructions

There are two options to install the driver:

OPTION A: Installing the kernel and dtb debians (Recommended)

This is the easiest and fastest way to install the driver. In order to install the debian packages you just need to perform the following instructions:

OPTION B: Applying the patches on the sources

In order to apply the patch on the JetPack sources with Xavier NX and Nano support, you must perform the following instructions:

ISP camera overrides installation

Visit the Custom ISP Configuration page in order to learn how to use the camera_overrides.isp file to configure the ISP.

Supported features

Resolutions and framerates

  • 1920x1080 @ 60fps
  • 4032x3040 @ 30fps

Controls

  • Gain
  • Exposure
  • Framerate
  • Group Hold

Example pipelines

Display

  • 1920x1080
SENSOR_ID=0 # 0 for CAM0 and 1 for CAM1 ports
FRAMERATE=60 # Framerate can go from 2 to 60 for 1920x1080 mode
gst-launch-1.0 nvarguscamerasrc sensor-id=$SENSOR_ID ! "video/x-raw(memory:NVMM),width=1920,height=1080,framerate=$FRAMERATE/1" ! nvvidconv ! nvoverlaysink
  • 4032x3040
SENSOR_ID=0 # 0 for CAM0 and 1 for CAM1 ports
FRAMERATE=30 # Framerate can go from 2 to 30 for 4032x3040 mode
gst-launch-1.0 nvarguscamerasrc sensor-id=$SENSOR_ID ! "video/x-raw(memory:NVMM),width=4032,height=3040,framerate=$FRAMERATE/1" ! nvvidconv ! "video/x-raw(memory:NVMM),width=1920,height=1080,framerate=$FRAMERATE/1" ! nvoverlaysink

MP4 Recording

  • 1920x1080
SENSOR_ID=0 # 0 for CAM0 and 1 for CAM1 ports
FRAMERATE=60 # Framerate can go from 2 to 60 for 1920x1080 mode
gst-launch-1.0 -e nvarguscamerasrc sensor-id=$SENSOR_ID ! "video/x-raw(memory:NVMM),width=1920,height=1080,framerate=$FRAMERATE/1" ! nvv4l2h264enc ! h264parse ! mp4mux ! filesink location=rpi_v3_imx477_cam$SENSOR_ID.mp4
  • 4032x3040
SENSOR_ID=0 # 0 for CAM0 and 1 for CAM1 ports
FRAMERATE=30 # Framerate can go from 2 to 30 for 4032x3040 mode
gst-launch-1.0 -e nvarguscamerasrc sensor-id=$SENSOR_ID ! "video/x-raw(memory:NVMM),width=4032,height=3040,framerate=$FRAMERATE/1" ! nvv4l2h264enc ! h264parse ! mp4mux ! filesink location=rpi_v3_imx477_cam$SENSOR_ID.mp4

JPEG snapshots

  • 1920x1080
SENSOR_ID=0 # 0 for CAM0 and 1 for CAM1 ports
FRAMERATE=60 # Framerate can go from 2 to 60 for 1920x1080 mode
NUMBER_OF_SNAPSHOTS=20
gst-launch-1.0 -e nvarguscamerasrc num-buffers=$NUMBER_OF_SNAPSHOTS sensor-id=$SENSOR_ID ! "video/x-raw(memory:NVMM),width=1920,height=1080,framerate=$FRAMERATE/1" ! nvjpegenc ! multifilesink location=%03d_rpi_v3_imx477_cam$SENSOR_ID.jpeg
  • 4032x3040
SENSOR_ID=0 # 0 for CAM0 and 1 for CAM1 ports
FRAMERATE=30 # Framerate can go from 2 to 30 for 4032x3040 mode
NUMBER_OF_SNAPSHOTS=20
gst-launch-1.0 -e nvarguscamerasrc num-buffers=$NUMBER_OF_SNAPSHOTS sensor-id=$SENSOR_ID ! "video/x-raw(memory:NVMM),width=4032,height=3040,framerate=$FRAMERATE/1" ! nvjpegenc ! multifilesink location=%03d_rpi_v3_imx477_cam$SENSOR_ID.jpeg

About

NVIDIA Jetson IMX477 HQ RPI V3 camera driver