Read it first : https://github.com/android-rpi/local_manifests # Build Kernel Install gcc-arm-linux-gnueabihf $ cd kernel/rpi $ ARCH=arm scripts/kconfig/merge_config.sh arch/arm/configs/bcm2709_defconfig android/configs/android-base.cfg android/configs/android-recommended.cfg $ ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- make zImage $ ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- make dtbs # Install python mako module sudo apt-get install python-mako # Patch framework source : https://github.com/android-rpi/device_brcm_rpi3/wiki#use-hal_pixel_format_bgra_8888 # Build Android source Continue build with http://source.android.com/source/building.html $ source build/envsetup.sh $ lunch rpi3-eng $ make ramdisk systemimage # Help for build failure : https://github.com/android-rpi/device_brcm_rpi3/wiki/Build-Errors # Prepare sd card Partitions of the card should be set-up like followings. p1 512MB for BOOT : Do fdisk : W95 FAT32(LBA) & Bootable, mkfs.vfat p2 512MB for /system : Do fdisk, new primary partition p3 512MB for /cache : Do fdisk, mkfs.ext4 p4 remainings for /data : Do fdisk, mkfs.ext4 Set volume label for each partition - system, cache, userdata : use -L option of mkfs.ext4, e2label command, or -n option of mkfs.vfat # Write system partition $ cd out/target/product/rpi3 $ sudo dd if=system.img of=/dev/<p2> bs=1M # Copy kernel & ramdisk to BOOT partition device/brcm/rpi3/boot/* to p1:/ kernel/rpi/arch/arm/boot/zImage to p1:/ kernel/rpi/arch/arm/boot/dts/bcm2710-rpi-3-b.dtb to p1:/ kernel/rpi/arch/arm/boot/dts/overlays/vc4-kms-v3d.dtbo to p1:/overlays/vc4-kms-v3d.dtbo out/target/product/rpi3/ramdisk.img to p1:/ # HDMI_MODE : If DVI monitor does not work, try followings for p1:/config.txt hdmi_group=2 hdmi_mode=85 # How to put Android-TV launcher : https://github.com/android-rpi/device_brcm_rpi3/wiki#how-to-apply-android-tv-leanback-launcher