meta-wolfssl

This layer provides both Yocto and OpenEmbedded recipes for wolfSSL products and examples, as well as .bbappend files for configuring common open source packages and projects with support for wolfSSL.

This layer currently provides recipes for the following wolfSSL products:

These recipes have been tested using these versions of yocto:

Scarthgap (v5.0)
Nanbield (v4.3)
Langdale (v4.1)
Kirkstone (v4.0)
Hardknott (v3.3)
Gatesgarth (v3.2)
Dunfell (v3.1)
Zeus (v3.0)
Thud (v2.6)
Sumo (v2.5)

The wolfSSL library recipe is also included in the openembedded meta-networking layer, located here.

wolfSSL is a lightweight SSL/TLS library written in C and targeted at embedded and RTOS environments - primarily because of its small size, speed, and feature set. With common build sizes between 20-100kB, it is typically up to 20 times smaller than OpenSSL. Other feature highlights include support for TLS 1.3 and DTLS 1.2, full client and server support, abstraction layers for easy porting, CRL and OCSP support, key and cert generation, support for hardware cryptography modules, and much more. For a full feature list, please visit the wolfSSL product page.

Setup

Clone meta-wolfssl onto your machine:

git clone https://github.com/wolfSSL/meta-wolfssl.git

After installing your build's Yocto/OpenEmbedded components:

Insert the 'meta-wolfssl' layer location into your build's bblayers.conf file, in the BBLAYERS section:
```
BBLAYERS ?= " \
   ...
   /path/to/yocto/poky/meta-wolfssl \
   ...
"
```
Once the 'meta-wolfssl' layer has been added to your BBLAYERS collection, you have two options
1. If you want to directly add wolfSSL recipes to your image recipe proceed to step 3.
2. If you want to run bitbake wolf* on a particular recipe then it needs to be added to the IMAGE_INSTALL. This can be done by adding the following line to local.conf located in path/to/poky/build/conf.
  - For Dunfell and newer versions of Yocto:
```
IMAGE_INSTALL:append = " wolfssl wolfssh wolfmqtt wolftpm "
```
  - For versions of Yocto older than Dunfell:
```
IMAGE_INSTALL_append = " wolfssl wolfssh wolfmqtt wolftpm "
```
```
$ bitbake wolfssl
$ bitbake wolfssh
$ bitbake wolfmqtt
$ bitbake wolftpm
$ bitbake wolfclu - This command would result in an error
```
Edit your build's local.conf file to install the recipes you would like to include (ie: wolfssl, wolfssh, wolfmqtt, wolftpm)
- For Dunfell and newer versions of Yocto
```
IMAGE_INSTALL:append = " wolfssl wolfssh wolfmqtt wolftpm wolfclu "
```
- For versions of Yocto older than Dunfell
```
IMAGE_INSTALL_append = " wolfssl wolfssh wolfmqtt wolftpm wolfclu "
```
This will add the necassary --enable-* options necassary to use your specific combination of recipes.

If you did step 2.2 make sure you comment out recipes that you don't desire because leaving them uncommented may add unneed --enable-* options in your build, which could increase the size of the build and turn on uneeded features.

Once your image has been built, the default location for the wolfSSL library on your machine will be in the "/usr/lib" directory.

Note: If you need to install the development headers for these libraries, you will want to use the "-dev" variant of the package. For example, to install both the wolfSSL library and headers into your image, use "wolfssl-dev" along with IMAGE_INSTALL:append, ie:

For Dunfell and newer versions of Yocto

IMAGE_INSTALL:append = "wolfssl-dev"

For versions of Yocto older than Dunfell

IMAGE_INSTALL_append = "wolfssl-dev"

After building your image, you will find wolfSSL headers in the "/usr/include" directory and applications in "usr/bin".

Customizing the wolfSSL Library Configuration

Custom applications that use wolfSSL libraries may wish to enable or disable specific Autoconf/configure options when the library is compiled. This can be done through the use of an application-specific .bbappend file for the wolfSSL library.

For example, if your application wanted TLS 1.3 support compiled into the wolfSSL library, you would want to create a .bbappend file for wolfSSL in your application recipe/layer, ie:

wolfssl_%.bbappend

Inside this .bbappend file, you can use the EXTRA_OECONF variable to add additional configure options to the wolfSSL library build. For enabling TLS 1.3 this would be:

EXTRA_OECONF += "--enable-tls13"

Make sure this .bbappend file gets picked up when bitbake is compiling your application.

Building Other Applications with wolfSSL

Support for building many open source projects with wolfSSL is included in the various recipes-* directories. As an example, take a look at recipes_support/curl/wolfssl_%.bbappend. This .bbappend adds --enable-curl to the wolfSSL configuration line via EXTRA_OECONF. curl_%.bbappend sets up curl to use wolfSSL as its crypto and TLS provider. curl_7.82.0.bbappend is a .bbappend specifically for adding wolfSSL support to curl version 7.82.0.

In the curl project, wolfSSL is supported upstream, but other projects may not have native wolfSSL support. We've added wolfSSL support to many popular open source projects, and the patches can be found in our open source projects (OSP) repository. Several of these patches are used here. OpenSSH is one example. Under recipes-connectivity/openssh/files, you'll find a patch for OpenSSH 8.5p1 that adds wolfSSL support. One directory up in recipes-connectivity/openssh, you'll find openssh_8.5p1.bbappend which

Adds the patch to the build.
Removes OpenSSH's OpenSSL dependency.
Adds the wolfSSL dependency.
Adds --with-wolfssl to the configuration line.

Additionally, there's another wolfssl_%.bbappend which adds --enable-openssh to the wolfSSL configuration. This is the general pattern you'll see for other projects that depend on wolfSSL, too.

This layer offers wolfSSL support for the following open source projects:

curl
OpenSSH

Example Application Recipes

Several wolfSSL example application recipes are included in this layer. These include:

wolfCrypt test application (depends on wolfssl)
wolfCrypt benchmark application (depends on wolfssl)

The recipes for these applications are located at:

meta-wolfssl/recipes-examples/wolfcrypt/wolfcrypttest/wolfcrypttest.bb
meta-wolfssl/recipes-examples/wolfcrypt/wolfcryptbenchmark/wolfcryptbenchmark.bb

These can be compiled individually with bitbake:

$ bitbake wolfcrypttest
$ bitbake wolfcryptbenchmark

To install these applications into your image, you will need to edit your "build/conf/local.conf" file and add them to the "IMAGE_INSTALL" variable. For example, to install the wolfSSL, wolfSSH, and wolfMQTT libraries in addition to the wolfCrypt test and benchmark applications:

For Dunfell and newer versions of Yocto

IMAGE_INSTALL:append = " wolfssl wolfssh wolfmqtt wolftpm wolfclu wolfcrypttest wolfcryptbenchmark "

For versions of Yocto older than Dunfell

IMAGE_INSTALL_append = " wolfssl wolfssh wolfmqtt wolftpm wolfclu wolfcrypttest wolfcryptbenchmark "

When your image builds, these will be installed to the '/usr/bin' system directory. When inside your executing image, you can run them from the terminal.

Excluding Recipe from Build

Recipes can be excluded from your build by deleting their respective ".bb" file, or by deleting the recipe directory.

Wolfssl-py and Wolfcrypt-py Installation Requirements

To use the python wrapper for wolfSSL and wolfcrypt in a yocto build it will require python3, python3-cffi and wolfSSL are built on the target system.

If you are using older version of yocto (2.x) or (3.x), you will need to download and add the meta-oe and meta-python recipes from openembedded's meta-openembedded to the image.

It will be necassary then to make sure at minimum that the IMAGE_INSTALL:append looks as follows:

For Dunfell and newer versions of Yocto

if wolfSSL-py is desired on target system

IMAGE_INSTALL:append = " wolfssl wolfssl-py python3 "

if wolfCrypt-py is desired on target system

IMAGE_INSTALL:append = " wolfssl wolfcrypt-py python3 "

if wolfSSL-py and wolfCrypt-py are both desired on target system

Image_INSTALL:append = " wolfssl wolfssl-py wolfcrypt-py python3 python3-cffi"

For versions of Yocto older than Dunfell

if wolfSSL-py is desired on target system

IMAGE_INSTALL_append = " wolfssl wolfssl-py python3 "

if wolfCrypt-py is desired on target system

IMAGE_INSTALL_append = " wolfssl wolfcrypt-py python3 "

if wolfSSL-py and wolfCrypt-py are both desired on target system

Image_INSTALL_append = " wolfssl wolfssl-py wolfcrypt-py python3 python3-cffi"

Testing Wolfssl-py and Wolfcrypt-py

To test the python wrapper for wolfSSL and wolfcrypt in a yocto build it will require python3, python3-pytest, python3-cffi and wolfSSL are built on the target system.

It will be necassary then to make sure at minimum that the IMAGE_INSTALL:append looks as follows:

If wolfSSL-py and wolfCrypt-py are both desired on target system

For Dunfell and newer versions of Yocto

IMAGE_INSTALL:append = " wolfssl wolfssl-py wolfcrypt-py wolf-py-tests python3 python3-cffi python3-pytest"

For versions of Yocto older than Dunfell

IMAGE_INSTALL_append = " wolfssl wolfssl-py wolfcrypt-py wolf-py-tests python3 python3-cffi python3-pytest"

This places the tests in the root home directory

$ cd /home/root/wolf-py-tests/
$ ls wolfcrypt-py-test wolfssl-py-test

navigate into the desired test:

+ for wolfssl-py
```
$ cd /home/root/wolf-py-tests/wolfssl-py-test

```
+ for wolfcrypt-py
```
$ cd /home/root/wolf-py-tests/wolfcrypt-py-test
```

once in the desired test directory, begin the test by calling pytest

$ pytest

This should then result in a pass or fail for the desired suit.

If you are testing this with the core-image-minimal yocto build, make sure to add a DNS server to /etc/resolv.conf like such with root perms

echo "nameserver 8.8.8.8" >> /etc/resolv.conf

wolfProvider

To build wolfProvider view the instructions in this README

wolfEngine

To build wolfEngine view the instructions in this README

FIPS-READY

For building FIPS-Ready for wolfSSL view the instruction in this README

Commercial/FIPS Bundles

For building FIPS and/or commercial bundles of wolfSSL products view the instructions in this README.

To gain access to these bundles contact support@wolfssl.com to get a qoute.

Maintenance

Layer maintainers:

wolfSSL Support (support@wolfssl.com)
Chris Conlon (chris@wolfssl.com)
Jacob Barthelmeh (jacob@wolfssl.com)

Website

https://www.wolfssl.com

License

wolfSSL is open source and dual licensed under both the GPLv2 and a standard commercial license. wolfSSL also offers commercial licensing for our FIPS-validated wolfCrypt module. For commercial license questions, please contact wolfSSL at licensing@wolfssl.com. For product support inquiries please contact support@wolfssl.com.

wolfSSL / meta-wolfssl