A project to recover signal clock and keep it in phase with input signal
Tested with a M-Series signal, works.
Cannot get locked at some specific frequencies.
The code sucks, because I didn't have verilog developing experience at that time.
位时钟恢复，通过检测最短的两个相同边缘间隔时钟周期并平分来恢复信号时钟，同时利用相同边沿完成相位锁定
测试时输入m序列，恢复效果一般
我在编写该程序时尚无Verilog开发经验，未使用状态机，思路偏软件编程
存在部分频点失锁的情况