28 key (3-row) angled unibody keyboard with col stagger
- Hotswap sockets (MX)
- Seeed Xiao Controller
- RP2040 (w/ QMK, Vial)
- BLE (w/ZMK)
- SAMD21 (should work, don't have one to test)
- gerber and case files are supplied (kicad files, stl as well as cadquery files)
- completely open source, permissive license (CERN-OHL-P)
All production files you need to build your own board can be found here.
The case has no bottom and ends right below the HS Sockets. You may either use it as is, but preferably use some 2-3mm self-adhesive neopren on the whole pcb. The case will be hard to print on a FDM Printer, so maybe use a service to print it in resin or nylon.
Apart from the pcb and optionally a case you need:
- 28 hotswap sockets
- 28 diodes (1N4148 int SOT-123)
- 28 of your favourite switches
- 1 Controller
firmware configs for qmk and vial can be found in the firmware folder.
The first time the pcb is plugged in, the bootloader will provide a drive to upload the firmware file.
Everything in this repository is free to use however you might see fit. If you want to support me and my projects, please consider linking back to this repository if you build/change/use anything.
If you would like to send me a tip, you could do it here (Please don't feel like you have to).
