Stefan Wendler's repositories
msp430-harduart
Hardware UART example for MSP430G2553 on TI Launchpad using mps430-gcc on Linux
stm32-pwm-servo-sample
Sample showing the usage of timers for PWM generation on the STM32 with libopencm3
msp430-softuart
Software UART example for MSP430 using mps430-gcc on Linux
msp430-spi-nrfreg
Example on how to read registers of the Nordic nRF24l01+ radio through SPI on USCI_B of MSP430G2553
msp430-i2cslave
MSP430 I2C slave example (for MSP430G2553 on Launchpad) including master example (e.g. for TP-Link MR3020)
lattice-logic-sniffer
Simple 8 port logic sniffer written in Verilog for the Lattice MachXO2 Breakout Board.
stm32-rob01
Firmware for STM32 based autonomous robot “rob01″
msp430-pwm-servo-sample
This example shows how to use TIMER_A0+A1 PWM with a MSP430G2xx3 MCU. It controls two servos on P1.6
rcswitch-kmod
Linux Kernel Module to control 434Mhz based RC switches through sysfs.
msp430-standalone-sample
Running MSP430G2xxx stand alone (without Lauchpad), use Launchpad for in circuit programming
usherpa-firmware
uSherpa is a micro-controller firmware (currently for the MSP430G2553) which helps in quickly adding a micro-controller to a more powerful embedded system (e.g. the MIPS based Carambola or the ARM based beaglebone).
scratch-pynetsense
Python library provides a simple to use client implementation for implementing scratch networking sensors.
msp430-ebunny
This is just a quick little Easter hack. This firmware for the MSP430G2231 makes two glass Easter bunnies glow through a PWM.
rcswitch-fpga
RC Switch Send - Verilog Module to Operate 434MHz RC Switches
srf05modweb
This project provides a kernel module and a web service to access the SRF05 ultra sonic range finder from a Linux based device (e.g. TP-Link MR3020).
usherpa-pysherpa
This library provides a Python binding to a microcontroller (e.g. the MSP430G2553) running the uSherpa firmware.
msp430-ioexp
Simple MSP430 firmware converting the MSP430 into an IO expander accessible through I2C on the host.
PROPTB6612FNG
A simple library written in SPIN to use the Thosiba TB6612FNG dual motor controller on the Parallax Propeller