webprofusion-chrisc / podtana

Midi Bridge from USB Line 6 POD HD 400 to Boss Katana MKII (100 etc), Also advertises controller as virtual midi output

podtana

Bridge from USB Line 6 POD HD 400 to Boss Katana MKII (100 etc), Also advertises controller as virtual midi output

• Intended for use on linux (Raspberry PI etc with 2x USB inputs)
• Should work for POD HD 300, POD HD 500 as well
• Reads raw midi from the device USB endpoint
• Listens for device connect/reconnect by monitoring available connected devices.

Requirements:

• Linux
• Python

Notes & Limitations:

Anyone with the necessary skills or interest is welcome to try and get it working on their setup to improve it.

Requires user permissions for usb device: sudo nano /etc/udev/rules.d/50-myusb.rules

Allow all users to read/write to the controller SUBSYSTEMS=="usb", ATTRS{idVendor}=="0e41", ATTRS{idProduct}=="5058", GROUP="users", MODE="0666"

To start script on device connection (or boot), specify a user and path: SUBSYSTEMS=="usb", ATTRS{idVendor}=="0e41", ATTRS{idProduct}=="5058", GROUP="users", MODE="0666", RUN+="/bin/su theuser -c '/usr/bin/python /home/theuser/pyusb/podtana.py'"

To run as a systemd service, cp podtana.py to /usr/sbin/, then create systemd service sudo nano /etc/systemd/system/podtana.service

[Unit]
Description=podtana

[Service]
ExecStart=/usr/bin/python3 /usr/sbin/podtana.py
User=myuser
RemainAfterExit=yes

[Install]
WantedBy=multi-user.target