bind

Description

Control BIND name servers and zones

Overview

The BIND module provides an interface for managing a BIND name server, including installation of software, configuration of the server, creation of keys, and definitions for zones.

Module Description

BIND automates configuration and operation of a BIND DNS server.

Setup

What BIND affects:

package installation and service control for BIND
configuration of the server, zones, acls, keys, and views
creation of TSIG and DNSSEC keys

###Getting started

To begin using the BIND module with default parameters, declare the class

class { 'bind': }

Puppet code that uses anything from the BIND module requires that the core bind classes be declared.

###bind

bind provides a few parameters that control server-level configuration parameters in the named.conf file, and also defines the overall structure of DNS service on the node.

class { 'bind':
    confdir    => '/etc/bind',
    cachedir   => '/var/lib/bind',
    forwarders => [
        '8.8.8.8',
        '8.8.4.4',
    ],
    dnssec     => true,
    version    => 'Controlled by Puppet',
}

Puppet will manage the entire named.conf file and its includes. Most parameters are set to a fixed value, but the server's upstream resolvers are controlled using forwarders, enabling of DNSSec signature validation is controlled using dnssec, and the reported version is controlled using version. It is unlikely that you will need to define an alternate value for confdir or cachedir.

###bind::key

Creates a TSIG key file. Only the secret parameter is required, but it is recommended to explicitly supply the algorithm as well. The key file will be stored in ${::bind::confdir}/keys with a filename derived from the title of the bind::key declaration.

bind::key { 'local-update':
    algorithm => 'hmac-sha256',
    secret    => '012345678901345678901234567890123456789=',
    owner     => 'root',
    group     => 'bind',
}

###bind::acl

Declares an acl in the server's configuration. The acl's name is the title of the bind::acl declaration.

bind::acl { 'rfc1918':
    addresses => [
        '10.0.0.0/8',
        '172.16.0.0/12',
        '192.168.0.0/16',
    ]
}

bind::acl { 'secondary-dns':
    addresses => '192.0.2.4/32',
}

###bind::zone

Declares a zone in the server's configuration. The corresponding zone file will be created if it is absent, but any existing file will not be overwritten. Only the zone_type is required. If domain is unspecified, the title of the bind::zone declaration will be used as the domain.

A master zone with DNSSec disabled which allows updates using a TSIG key and zone transfers to servers matching an acl:

bind::zone { 'example.com-internal':
    zone_type       => 'master',
    domain          => 'example.com',
    allow_updates   => [ 'key local-update', ],
    allow_transfers => [ 'secondary-dns', ],
    ns_notify       => true,
    dnssec          => false,
}

A master zone with DNSSec enabled which allows updates using a TSIG key and zone transfers to servers matching an acl:

bind::zone { 'example.com-external':
    zone_type       => 'master',
    domain          => 'example.com',
    allow_updates   => [ 'key local-update', ],
    allow_transfers => [ 'secondary-dns', ],
ns_notify       => true,
    dnssec          => true,
key_directory   => '/var/cache/bind/example.com',
}

A master zone which is initialized with a pre-existing zone file (for example, to migrate an existing zone to a bind-module controlled server or to recover from a backup):

bind::zone { 'example.com':
    zone_type => 'master',
    source    => 'puppet:///backups/dns/example.com',
}

A slave zone which allows notifications from servers matched by IP:

bind::zone { 'example.net':
    zone_type    => 'slave',
    masters      => [ '198.0.2.2' ],
    allow_notify => [ '192.0.2.2' ],
    ns_notify    => false,
}

A forward zone:

bind::zone { 'example.org':
    zone_type  => 'forward',
    forwarders => [ '10.0.2.4', ],
    forward    => 'only',
}

###bind::view

Declares a view in the BIND configuration. There must be at least one view declaration.

A common use for views is to use a single dual-homed nameserver as a resolver on a private network and an authoritative non-resolving nameserver on the Internet. Furthermore, the Internet-facing and private network-facing views may present different authoritative results for a domain. Given a BIND server connected to the internet with the address 198.0.2.2 and connected to a private network with the address 10.0.2.2, here are the bind::view declarations that would create this configuration:

bind::view { 'internet':
    recursion          => false,
    match_destinations => [ '198.0.2.2', ],
    zones              => [ 'example.net', 'example.com-external', ],
}

bind::view { 'private':
    recursion          => true,
    match_destinations => [ '10.0.2.2', ],
    zones              => [ 'example.net', 'example.com-internal', ],
}

In this scenario, the example.com domain has two separate zones that are presented in each of the internet and private views. These two zones are independent, and TSIG-signed updates to example.com must be made to either 198.0.2.2 or 10.0.2.2, to change the internet or private views of this domain. Updates to example.net may be made via either address, since the zone is included in both views.

Another use for views is to control access to the DNS server's services. In this example, service is restricted to a specific set of client address ranges, and queries for the example.org domain are handled using a declared zone (see bind::zone declaration for example.org above):

bind::view { 'clients':
    recursion     => true,
    match_clients => [
        '10.10.0.0/24',
        '10.100.0.0/24',
    ],
    zones         => [
        'example.org',
    ],
}

###resource_record

Declares a resource record. For exampmle:

resource_record { 'www.example.com address':
    ensure  => present,
    record  => 'www.example.com',
    type    => 'A',
    data    => [ '172.16.32.10', '172.16.32.11' ],
    ttl     => 86400,
    zone    => 'example.com',
    server  => 'ns.example.com',
    keyname => 'local',
    hmac    => 'hmac-sha1',
    secret  => 'aLE5LA=='
}

This resource declaration will result in address records with the addresses 172.16.32.10 and 172.16.32.11 (data), a TTL of 86400 (ttl) in the zone example.com (zone). Any updates necessary to create, update, or destroy these records are authenticated using a TSIG key named 'local' (keyname) of the given type (hmac) with the given secret.

No semantic information is communicated in the resource title. It is strictly for disambiguation of resources within Puppet.

record is required, and is the fully qualified record to be managed.

type is required, and is the record type. It must be one of: A AAAA CNAME NS MX SPF SRV NAPTR PTR or TXT. Other DNS record types are not currently supported.

rrclass is the class of the record. The default value is IN and allowed values are IN, CH, and HS.

data is required, and may be a scalar value or an array of scalar values whose format conform to the type of DNS resource record being created. data is an ensurable property and changes will be reflected in DNS.

ttl defaults to 43200 and need not be specified. ttl is an ensurable property and changes will be reflected in DNS.

zone is not required, and generally not needed. It is only necessary to specify the zone to be updated if the target nameserver has the record in multiple zones, e.g. the NS records of a zone whose parent zone is served by the same nameserver.

server defaults to "localhost" and need not be specified. The value may be either a hostname or IP address.

keyname defaults to "update" and need not be specified. This parameter specifies the name of a TSIG key to be used to authenticate the update. The resource only uses a TSIG key if a secret is specified.

hmac defaults to "hmac-sha1" and need not be specified. This parameter specifies the algorithm of the TSIG key to be used to authenticate the update. The resource only uses a TSIG key if a secret is specified.

secret is optional. This parameter specifies the encoded cryptographic secret of the TSIG key to be used to authenticate the update. If no secret is specified, then the update will not use TSIG authentication.

####resource_record examples

Mail exchangers for a domain. Declares three mail exchangers for the domain example.com, which are mx.example.com, mx2.example.com, and mx.mail-host.ex with priorities 10, 20, and 30, respectively:

resource_record { 'example.com mail exchangers':
    record => 'example.com',
    type   => 'MX',
    data   => [ '10 mx', '20 mx2', '20 mx.mail-host.ex.', ],
}

Nameserver records for a zone. Declares three nameserver records for the zone example.com, which are ns1.example.com, ns2.example.com, and ns.dns-host.ex:

resource_record { 'example.com name servers':
    record => 'example.com',
    type   => 'NS',
    data   => [ 'ns1', 'ns2', 'ns.dns-host.ex.' ],
}

Service locators records for a domain. Declares a service locator for SIP over UDP to the domain example.com, in which the service located at port 5060 of inbound.sip-host.ex is given priority 5 and weight 100.

resource_record { 'example.com SIP service locator':
    record => '_sip._udp.example.com',
    type   => 'SRV',
    data   => [ '5 100 5060 inbound.sip-host.ex.', ],
}

vshn / puppet-bind