volodymyr-babak / performance-tests

Thingsboard performance tests

performance-tests

Thingsboard performance tests

Project that is able to stress test Thingsboard server with a huge number of MQTT messages published simultaneously from different devices.

Prerequisites

• Install Docker CE

Running

To run test against ThingsBoard first create plain text file to set up test configuration (in our example configuration file name is .env):

touch .env

Edit this .env file:

nano .env

and put next content into the text file (modify it according to your test goals):

REST_URL=http://IP_ADDRESS_OF_TB_INSTANCE:9090
# IP_ADDRESS_OF_TB_INSTANCE is your local IP address if you run ThingsBoard on your dev machine in docker
# Port should be modified as well if needed 
REST_USERNAME=[e-mail]
REST_PASSWORD=tenant

MQTT_HOST=IP_ADDRESS_OF_TB_INSTANCE
# IP_ADDRESS_OF_TB_INSTANCE is your local IP address if you run ThingsBoard on your dev machine in docker
MQTT_PORT=1883

DEVICE_API=MQTT
DEVICE_START_IDX=0
DEVICE_END_IDX=10
DEVICE_CREATE_ON_START=true
DEVICE_DELETE_ON_COMPLETE=true

PUBLISH_COUNT=10
PUBLISH_PAUSE=1000

Where:

• REST_URL - Rest URL of the TB instance
• REST_USERNAME - Login of the user
• REST_PASSWORD - Password of the user
• MQTT_HOST - URL of the ThingsBoard MQTT broker
• MQTT_PORT - Port of the ThingsBoard MQTT broker
• DEVICE_API - Use MQTT or HTTP Device API for send messages
• DEVICE_START_IDX - First index of the device that is going to be used in the test. Token of the device is going to be index of this device during test
• DEVICE_END_IDX - Last index of the device that is going to be used in the test
• DEVICE_CREATE_ON_START - Create devices before test
• DEVICE_DELETE_ON_COMPLETE - Delete devices after test, there were created on start of the test
• PUBLISH_COUNT - Number of the messages to be published for a single simulated device
• PUBLISH_PAUSE - Pause between messages for a single simulated device in milliseconds
• MQTT_SSL_ENABLED - Enable/disable ssl for MQTT
• MQTT_SSL_KEY_STORE - MQTT key store file location
• MQTT_SSL_KEY_STORE_PASSWORD - MQTT key store file password

Once params are configured to run test simple type from the folder where configuration file is located:

docker run -it --env-file .env --name tb-perf-test thingsboard/tb-performance-test