vladak / shield

code for ESP32 Adafruit Feather to get various sensor readings and publish them to MQTT broker

vladak/shield Issues

add pictures with RFM69
Closed 5 months ago
consider replacing WiFi with Bluetooth LE (BLE) for battery powered devices
Closed 5 months ago4
add steps to upload the *.py using web workflow
Closed 5 months ago1
store the safe mode reason
Closed 4 months ago2
use safemode.py to restart the microcontroller
Closed 6 months ago1
consider using more precise time in enter_sleep()
Closed 6 months ago2
replace watchdog.deinit() with setting mode to None
Closed 7 months ago
configure Prometheus mqtt exporter to use unique sensor names
Closed 9 months ago1
use MQTT loop when not running on battery
Closed 9 months ago
check the presence/type of mandatory tunables early on
Closed a year ago1
add SCD-40 support
Closed a year ago
catching BaseException results in safe mode on QtPy
Closed 2 years ago
workaround wifi connect problems
Closed 2 years ago1
store the code.py exception to flash
Updated 4 months ago4
set log level for the MQTT callbacks
Closed 2 years ago
pystack exhausted when using MQTT handler
Closed 2 years ago1
investigate hung DHCP
Closed 2 years ago2
revisit loggers with __name__
Closed 2 years ago1
consider replacing light sleep with button press detection
Closed 7 months ago2
avoid the time.sleep()
Closed 2 years ago2
figure out how to run pylint
Closed 2 years ago
consider dynamic deep sleep duration
Closed a year ago
log via MQTT
Closed 2 years ago2
cleanup the MQTT broker connection properly
Closed 5 months ago1
verify that the message was received by MQTT broker by subscribing to the topic
Closed a year ago1