vlachoudis / bCNC

GRBL CNC command sender, autoleveler and g-code editor

vlachoudis/bCNC Issues

100% reproducible: Crash after "scan"
Updated a month ago
Coordi ates display
Updated a month ago
Slice mesh doesn't work
Closed 2 months ago2
Dragknife M5 after every path
Updated 2 months ago
Connexion lost during job
Updated 2 months ago5
gcode is displayed in a small scrollable frame.
Updated 3 months ago2
bCNC-0.9.15 translation problem
Updated 3 months ago1
Customizable button. How to update variable value?
Updated 4 months ago1
Enable Private Vulnerability Reporting in GitHub
Updated 5 months ago
Issue due to"sudo python3 -m bCNC"
Updated 6 months ago
Large files issue random straight lines
Updated 6 months ago3
UnboundLocalError: cannot access local variable 'ef' where it is not associated with a value
Updated 6 months ago
Exceptions when hacked
Updated 6 months ago
Font(?) issue on Fedora 38 and CentOS Stream 9
Updated 6 months ago1
Fonts specified in px, not point.
Updated 7 months ago
Tabs created as progressive up/down moves.
Closed 8 months ago1
undo modification in garc definition
Updated 8 months ago
incompatible numpy version?
Updated 9 months ago
can not update
Updated 9 months ago4
TypeError: 'range' object doesn't support item deletion, triggered by Utils.py:533
Updated 10 months ago
Drag knife solenoid delay.
Closed 10 months ago2
abc Coord Values not shown in abcDRO labels (Wrong indentation on ControlPage.py)
Updated a year ago
Offset utility problem
Updated a year ago1
bCNC Pendant
Updated a year ago
build bcnc.exe
Updated a year ago7
Manual Tool Change - "Restart Spindle" Alarm
Updated a year ago
GRBL1.py override code not functioning correctly
Closed a year ago1
Involute gear, internal gear
Updated a year ago14
Idle [R] always on
Updated a year ago2
Send Gcode one by one
Updated a year ago9
Manual Tool Change (TLO) doesn't work
Updated a year ago7
Support For Marlin
Updated a year ago
bCNC 0.9.15 (linux py3.10.6) causes xorg to blink and logout
Updated a year ago
[Question] create g-code by jogging and recording points
Updated a year ago4
G-Code path deformed after applying "CUT"
Closed a year ago27
G91 bad support in CAM
Updated a year ago
Scan freezes setting g38.3 if the probe does not find something before z Min on the last scanned point
Updated a year ago
bCNC initiates unexpected movement until crashes at high speed
Updated a year ago
Error on debian linux (0.9.14.318+ds-3)
Updated a year ago
bCNC "not connected" to GRBL even though its obviously connected
Updated a year ago
bCNC with fluidNC 3.6.6 - Don't work more.
Closed a year ago5
Error calculating the minimum distance from arc to point
Updated a year ago2
Pocket sometimes keeps freezing bCNC
Updated a year ago
bCNC dont work - No module named svgelements
Closed a year ago2
Prompt to orient on file load
Updated 2 years ago
Errors in profile with pocket activated
Closed 2 years ago1
Small menu fonts
Updated 2 years ago
bCNC wont open
Closed 2 years ago2
Python 3.9
Updated 2 years ago
Caution: In profile operation with pocket enabled
Updated 2 years ago