Introduction ------------ This is a cleaned up version of the "ADAM2 App" available from http://www.seattlewireless.net/ADAM2 It's basically just a simple "Hello World"-program for the ADAM2 bootloader. ADAM2 is a bootloader used in a few embedded devices, such as the AR-7 based D-Link DSL 504T router. The responsibility of a bootloader is to (among other things) load up an application from persistent media (such as a harddrive, NAND flash memory or from a laser disc, possibly over a network connection) to the main memory and execute it. In routers or other embedded devices, this application is often the Linux kernel, but it is possible to load any kind of program, as long as it is compiled for the MIPS32 architecture and is prefixed with the ADAM2 app header. This is one of those other programs! Why would I want this? You probably don't. This application only serves as a playground for anyone interesting in how low-level software works. It can also be used to verify the ADAM2 functionality of a device. How do I use it? Please note that you will need a MIPS cross compiler in order to compile this! I find it very convenient to build all my toolchains using Buildroot, but whatever method you prefer should work as long as it produces a MIPS32 compiler. If your compiler is not called 'mipsel-linux-gcc' (it should), you can pass a custom name prefix to make using: CROSS_COMPILE=my-compiler-prefix- make (or by setting the CROSS_COMPILE environment variable). Since TI has been kind enough to provide us with a SREC to BIN converter which also adds the necessary ADAM2 app headers, we use it instead of going directly to BIN using objcopy. Most likely not the optimal way to do it, but it works ;-) MIPSEL ELF -> (objcopy) -> SREC -> (TI srec2bin tool) -> BIN Normally, printing stuff to a serial console involves a lot more code than shown in this example. Most likely you will need to at least set-up the UART hardware, and possibly power up other core subsystems before you can do anything. Fortunately, ADAM2 emulates YAMON. Think of YAMON as a set of functions which lies in a ROM memory (inside the hardware), which you can call from your application. These are accessed through a call vector table, starting at memory offset 0x90000500. Genuine YAMON is usually only available on MIPS developer boards, but fortunate for us, the ADAM2 emulates a few of its APIs. One of the three APIs it implements happens to be a print-to-console function. Happy days! Step-by-step usage - Build using "make". This will produce the final ADAM2 application file, called "adam2app.bin". - Check the docs at http://www.seattlewireless.net/ADAM2 for details on how to upload your program to the device. - You need a serial cable attached to your device in order for this application to make sense, as it only prints stuff to the debugconsole.