Giters

vincentlao / CPM.cmake

CMake's missing package manager. A small CMake script for setup-free, cross-platform and reproducible dependency management.

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

Build Status Actions Status Actions Status Actions Status

Setup-free CMake dependency management

CPM.cmake is a CMake script that adds dependency management capabilities to CMake. It's built as a thin wrapper around CMake's FetchContent module that adds version control, caching and a simple API.

Manage everything

Any downloadable project or resource can be added as a version-controlled dependency though CPM, it is not necessary to modify or package anything. Projects using modern CMake are automatically configured and their targets can be used immediately. For everything else, the targets can be created manually after the dependency has been downloaded (see the snippets below for examples).

Usage

After CPM.cmake has been added to your project, the function CPMAddPackage or CPMFindPackage can be used to fetch and configure a dependency. Afterwards, any targets defined in the dependency can be used directly. CPMFindPackage and CPMAddPackage take the following named parameters.

CPMAddPackage(
  NAME          # The unique name of the dependency (should be the exported target's name)
  VERSION       # The minimum version of the dependency (optional, defaults to 0)
  OPTIONS       # Configuration options passed to the dependency (optional)
  DOWNLOAD_ONLY # If set, the project is downloaded, but not configured (optional)
  [...]         # Origin parameters forwarded to FetchContent_Declare, see below
)

The origin may be specified by a GIT_REPOSITORY, but other sources, such as direct URLs, are also supported. If GIT_TAG hasn't been explicitly specified it defaults to v(VERSION), a common convention for git projects. On the other hand, if VERSION hasn't been explicitly specified, CPM can automatically identify the version from the git tag in some common cases. GIT_TAG can also be set to a specific commit or a branch name such as master to always download the most recent version. The optional argument FIND_PACKAGE_ARGUMENTS can be specified to a string of parameters that will be passed to find_package if enabled (see below).

After calling CPMAddPackage or CPMFindPackage, the following variables are defined in the local scope, where <dependency> is the name of the dependency.

  • <dependency>_SOURCE_DIR is the path to the source of the dependency.
  • <dependency>_BINARY_DIR is the path to the build directory of the dependency.
  • <dependency>_ADDED is set to YES if the dependency has not been added before, otherwise it is set to NO.

The difference between CPMFindPackage and CPMAddPackage is that CPMFindPackage will try to find a local dependency via CMake's find_package and fallback to CPMAddPackage if the dependency is not found. This behaviour can be also modified globally via CPM options.

Full CMakeLists Example

cmake_minimum_required(VERSION 3.14 FATAL_ERROR)

# create project
project(MyProject)

# add executable
add_executable(tests tests.cpp)

# add dependencies
include(cmake/CPM.cmake)

CPMAddPackage(
  NAME Catch2
  GITHUB_REPOSITORY catchorg/Catch2
  VERSION 2.5.0
)

# link dependencies
target_link_libraries(tests Catch2)

See the examples directory for complete examples with source code or the wiki for example snippets.

Adding CPM

To add CPM to your current project, simply add cmake/CPM.cmake to your project's cmake directory. The command below will perform this automatically.

mkdir -p cmake
wget -O cmake/CPM.cmake https://github.com/TheLartians/CPM.cmake/releases/latest/download/CPM.cmake

You can also use CMake to download CPM for you. See the wiki for more details.

Updating CPM

To update CPM to the newest version, update the script in the project's root directory, for example by running the command above. Dependencies using CPM will automatically use the updated script of the outermost project.

Advantages

  • Small and reusable projects CPM takes care of all project dependencies, allowing developers to focus on creating small, well-tested libraries.
  • Cross-Platform CPM adds projects directly at the configure stage and is compatible with all CMake toolchains and generators.
  • Reproducable builds By versioning dependencies via git commits or tags it is ensured that a project will always be buildable.
  • Recursive dependencies Ensures that no dependency is added twice and all are added in the minimum required version.
  • Plug-and-play No need to install anything. Just add the script to your project and you're good to go.
  • No packaging required Simply add all external sources as a dependency.
  • Simple source distribution CPM makes including projects with source files and dependencies easy, reducing the need for monolithic header files or git submodules.

Limitations

  • No pre-built binaries For every new build directory, all dependencies are initially downloaded and built from scratch. To avoid extra downloads it is recommend to set the CPM_SOURCE_CACHE environmental variable. Using a caching compiler such as ccahe can drastically reduce build time.
  • Dependent on good CMakeLists Many libraries do not have CMakeLists that work well for subprojects. Luckily this is slowly changing, however, until then, some manual configuration may be required (see the snippets below for examples). For best practices on preparing projects for CPM, see the wiki.
  • First version used In diamond-shaped dependency graphs (e.g. A depends on C@1.1 and B, which itself depends on C@1.2 the first added dependency will be used (in this case C@1.1). In this case, B requires a newer version of C than A, so CPM will emit a warning. This can be resolved by adding a new version of the dependency in the outermost project.

For projects with more complex needs and where an extra setup step doesn't matter, it may be worth to check out an external C++ package manager such as vcpkg, conan or hunter. Dependencies added with CPMFindPackage should work with external package managers. Additionally, the option CPM_USE_LOCAL_PACKAGES will enable find_package for all CPM dependencies.

Options

CPM_SOURCE_CACHE

To avoid re-downloading dependencies, CPM has an option CPM_SOURCE_CACHE that can be passed to CMake as -DCPM_SOURCE_CACHE=<path to an external download directory>. This will also allow projects to be configured offline, as long as the dependencies have been added to the cache before. It may also be defined system-wide as an environmental variable, e.g. by exporting CPM_SOURCE_CACHE in your .bashrc or .bash_profile.

export CPM_SOURCE_CACHE=$HOME/.cache/CPM

Note that passing the variable as a configure option to CMake will always override the value set by the environmental variable.

CPM_DOWNLOAD_ALL

If set, CPM will forward all calls to CPMFindPackage as CPMAddPackage. This is useful to create reproducible builds or to determine if the source parameters have all been set correctly. This can also be set as an environmental variable.

CPM_USE_LOCAL_PACKAGES

CPM can be configured to use find_package to search for locally installed dependencies first by setting the CMake option CPM_USE_LOCAL_PACKAGES. If the option CPM_LOCAL_PACKAGES_ONLY is set, CPM will emit an error if the dependency is not found locally. These options can also be set as environmental variables.

Snippets

These examples demonstrate how to include some well-known projects with CPM. See the wiki for more snippets.

Catch2

CPMAddPackage(
  NAME Catch2
  GITHUB_REPOSITORY catchorg/Catch2
  VERSION 2.5.0
)

Boost (via boost-cmake)

CPMAddPackage(
  NAME boost-cmake
  GITHUB_REPOSITORY Orphis/boost-cmake
  VERSION 1.67.0
)

cxxopts

CPMAddPackage(
  NAME cxxopts
  GITHUB_REPOSITORY jarro2783/cxxopts
  VERSION 2.2.0
  OPTIONS
    "CXXOPTS_BUILD_EXAMPLES Off"
    "CXXOPTS_BUILD_TESTS Off"
)

Yaml-cpp

CPMAddPackage(
  NAME yaml-cpp
  GITHUB_REPOSITORY jbeder/yaml-cpp
  # 0.6.2 uses deprecated CMake syntax
  VERSION 0.6.3
  # 0.6.3 is not released yet, so use a recent commit
  GIT_TAG 012269756149ae99745b6dafefd415843d7420bb 
  OPTIONS
    "YAML_CPP_BUILD_TESTS Off"
    "YAML_CPP_BUILD_CONTRIB Off"
    "YAML_CPP_BUILD_TOOLS Off"
)

google/benchmark

CPMAddPackage(
  NAME benchmark
  GITHUB_REPOSITORY google/benchmark
  VERSION 1.4.1
  OPTIONS
    "BENCHMARK_ENABLE_TESTING Off"
)

if (benchmark_ADDED)
  # compile with C++17
  set_target_properties(benchmark PROPERTIES CXX_STANDARD 17)
endif()

nlohmann/json

CPMAddPackage(
  NAME nlohmann_json
  VERSION 3.6.1  
  # the git repo is incredibly large, so we download the archived include directory
  URL https://github.com/nlohmann/json/releases/download/v3.6.1/include.zip
  URL_HASH SHA256=69cc88207ce91347ea530b227ff0776db82dcb8de6704e1a3d74f4841bc651cf
)

if (nlohmann_json_ADDED)
  add_library(nlohmann_json INTERFACE IMPORTED)
  target_include_directories(nlohmann_json INTERFACE ${nlohmann_json_SOURCE_DIR})
endif()

Range-v3

CPMAddPackage(
  NAME range-v3
  URL https://github.com/ericniebler/range-v3/archive/0.5.0.zip
  VERSION 0.5.0
  # the range-v3 CMakeLists screws with configuration options
  DOWNLOAD_ONLY True
)

if(range-v3_ADDED) 
  add_library(range-v3 INTERFACE IMPORTED)
  target_include_directories(range-v3 INTERFACE "${range-v3_SOURCE_DIR}/include")
endif()

Lua

CPMAddPackage(
  NAME lua
  GIT_REPOSITORY https://github.com/lua/lua.git
  VERSION 5.3.5
  DOWNLOAD_ONLY YES
)

if (lua_ADDED)
  # lua has no CMake support, so we create our own target

  FILE(GLOB lua_sources ${lua_SOURCE_DIR}/*.c)
  add_library(lua STATIC ${lua_sources})

  target_include_directories(lua
    PUBLIC
      $<BUILD_INTERFACE:${lua_SOURCE_DIR}>
  )
endif()

For a full example on using CPM to download and configure lua with sol2 see here.

Full Examples

See the examples directory for full examples with source code and check out the wiki for many more example snippets.

About

CMake's missing package manager. A small CMake script for setup-free, cross-platform and reproducible dependency management.

License:MIT License

Languages

Language:CMake 100.0%