Erik's repositories
Adafruit_FT6206_WT32-SCO1_Library
Arduino library for FT6206-based Capacitive touch screen
openwrt-aprx
This is the repository for the latest aprx, as maintained by PhirePhly
ADC-LUT-Calibration
It Is copied from GITHUB. ESP32 LUT Table ADC Callibration.
arduino-CAN
An Arduino library for sending and receiving data using CAN bus.
arduino-esp32
Arduino core for the ESP32
Arduino-FT6336U
FocalTech FT6336U (Self-Capacitive Touch Panel Controller) library for Arduino.
Aruino_CAN_BUS_MCP2515
Arduino CAN Bus library, MCP2515/MCP2551
DigitalMike
I2S Speaker Microphone
esp-idf-CANBus-Monitor
Monitor Canbus traffic
ESP-StepperMotor-Server
Turn your ESP32 into a complete stepper motor control server with web UI, REST API and serial control interface
ESPAsyncWebServer
Async Web Server for ESP8266 and ESP32
Huawei_R4850G2_CAN
Example code to communicate with Huawei R4850G2 Power Supply via CAN
jamulus-php
PHP script to fetch info from Jamulus servers and return as JSON
k3ng_rotator_controller
K3NG Arduino Amateur Radio Rotator Controller
LilyGo-EPD-4-7-OWM-Weather-Display
Using the LilyGo EPD 4.7" display to show OWM Weather Data
LoRa_APRS_Tracker
LoRa APRS Tracker with Tx and Rx capabilities, Messages, Wx, Winlink and more...
lv_sim_eclipse_sdl
PC simulator project for LVGL embedded GUI Library. Recommended on Linux and Mac.
Nextion_HAM-radio-screens
In this Repository you can find my latest Nextion screens for HAM Radio, mostly for MMDVM
NODEMCU-Rotor-Controller-concept
This is a concept using press down buttons for the NodeMCU rotor controller. WIP
ostar
The OSTAR firmware to make MMDVM work with openwrt device
PIDKiln
Kiln PID controller based on Espressif Systems ESP32 chip board with Arduino IDE.
RPi-WD-Packet-Interface
A digital mode soundcard interface for the Raspberry Pi
RPi_GPIO_i2c_LCD
A simple module for working with the HD44780 LCD over I²C using the PCF8574 Backpack
simple-ajax-crud
Simple ajax crud for web app.
Tasmota
Alternative firmware for ESP8266 with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Full documentation at