- If you want to support S5 WOL, you have to find EXTRA_CFLAGS += -DRTL8152_S5_WOL in the Makefile. Then, remove the first character '#", if it exists. - For Fedora, you may have to run the following command after installing the driver. # dracut -f - For Ubuntu, you may have to run the following command after installing the driver. # sudo depmod -a # sudo update-initramfs -u - Example of setting speed # ethtool -s eth0 autoneg on advertise 0x802f (2.5G) # ethtool -s eth0 autoneg on advertise 0x002f (1G) # ethtool -s eth0 autoneg on advertise 0x000f (100M full) # ethtool -s eth0 autoneg on advertise 0x0003 (10M full) - Disable center tap short # make CONFIG_CTAP_SHORT=OFF modules