Loading Docs for scope
Current prototype show reel. https://www.youtube.com/watch?v=2SCXNjTSLZ8&feature=youtu.be
Activities we want to complete:
- The Model needs a moderate amount of work, seeking expertise in this to resolve.
Increase interactivity of the HPLC model by adding interactive elements: Video https://www.youtube.com/watch?v=QFMpsgHBIxM (each feature is timestamped)
- Mobile phases tray, the lines and the containers-0:18-0.24
- Degasser-0:39-0:44-how to open and see inside during the purging -Make sure to notice on the left the LED in green-means the part is OK and running. (similar lights have all other parts, and all should be green for the instrument to run). 3.Pump-1:13-how to open and check for a leak and also to purge the machine in the morning. 4.Autosampler door-1:53
- Autosampler inside- the injector port (the green) with the needle. 2:08
- Column oven-to connect the column to the pump and the detector-2:20
7.Detector-UV/Vis- 2:58min - Waste connection-3.15-attention the merging of the tube from tiny into a big one and the leak sensor 9.Connection with computer-3:46
Improve Instrumental look for Switching on the instrument and injection process
Video https://www.youtube.com/watch?v=R7cCpCywPz4
Attention how the LED is in green colour in all parts, meaning the machine is ready for run without errors.
-
First the instrument should be turned on, therefore the LED buttons should be interactive. Before switching on they are in grey colour.
-
To switch on-Push the LED buttons on all parts starting from the pump, autosampler/injector, column thermostat, detector. LED light should be green in all parts.
-
How injection process happens-1:25 min and after.
Connecting the column https://www.youtube.com/watch?v=qza0UWJzX8s Would like to simulate this in VR Step by step
Waste bottle connection https://www.youtube.com/watch?v=S_ko3Iqf5T8 Waste bottle and connection with the instrument-7:25
Improve audio 1.The sounds, during Injection, when the flow is ON and the machine sound https://www.youtube.com/watch?v=3ZbURzvw7Ss 0:37 and onwards, this is how it sounds when the flow is ON. 0:45 when it injects. 2.Injection sound and machine sound when flow is ON. Injection with needle wash https://www.youtube.com/watch?v=VIWy8nJf1cg
Replace current mock up instruction sets with actual instructions: All Workflow detailed -from the start https://www.youtube.com/watch?v=CU14AmixUnw&t=1605s https://www.youtube.com/watch?v=S_ko3Iqf5T8
Mock up of Software interface (can provide some graphics if necessary)
Extra Software flow https://www.youtube.com/watch?v=nGf_MNOqqH0 Switching on-hard- and software https://www.youtube.com/watch?v=1cYd29Lk5Wc&t=17s
- Fill in the laboratory book
Date User name Project name/number Total number of samples Method name Analyse stage (QC) Column type (XBridge BEH C18, 150 mm x 3 mm, 2.5 μm) Solvent composition
– perhaps requires some UI improvements and keyboard integration.
- Instrument Online icon (can be in any from, s long it is written Instrument Online) -click to open #3 and setup for the analyses and pump flow 3. Instrument Control Diagram-is now open
I have a more comprehensive Software flow if time permits, however this may prove difficult to get done with our short time lines.