Giters

umeiko / KlipperPhonesLinux

Turning Mobile Phones into High Performance Klipper Host for 3D Printers Based on Native Linux

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

KlipperPhonesLinux

中文文档

Turning your old phones into high-performance Klipper host machine running on Debian Linux! wt88047 wt88047

Features

  • 💻 Native Linux Ubuntu 20.04 distribution, with CAN compatibility
  • 📱Equipped with a high-resolution capacitive touchscreen, providing an outstanding appearance
  • 🚀 Low cost with exceptional CPU performance
  • ⚡ DC supply, Power on simultaneously with your 3D printer
  • 🌈 Pre-installed Klipper runtime environment, no need for secondary installation
  • 🛠️ Integrated with various useful tools: USB serial terminal, SSH service, WebSSH terminal...
  • 🌐 Community Support: Share experiences, solve problems, and collaborate with other enthusiasts to contribute to the development of this project.

Supported Models

Flashing Instructions:

Quick Start After Flashing

  • Connect to the terminal

    • Using the network (recommended)
      • Connect to your local network with KlipperScreen
      • Enter your phone's IP address in a web browser with port 8888, e.g., 192.168.31.124:8888
      • Entering:
        • Host 0.0.0.0
        • Port 22
        • Username umeko
        • Password 1234
      • Then you can connect into your phone's SSH console in the web page.
    • Using USB serial
      • Connect your phone to your computer with a USB cable; your computer will recognize it as a serial device.
      • Use PuTTY or other terminal software to access the terminal console.

  • Connect to your 3D printer motherboard using an OTG adapter

    • In the command line, use the lsusb command to ensure the system recognizes your 3D printer motherboard.
      • Common motherboards will be displayed as Qingheng, OpenMoko xxx, etc.
      • If not recognized, check your cable connections.
    • Install Klipper firmware for your 3D printer motherboard.

      • Install cross-compiler

        sudo apt update
sudo apt install avrdude gcc-avr binutils-avr avr-libc stm32flash libnewlib-arm-none-eabi gcc-arm-none-eabi binutils-arm-none-eabi pkg-config

      • Refer to Klipper documentation to compile and install Klipper firmware for your Printer's mainboard.

  • Configure the 3D printer's configuration file

    • Obtain the configuration file from your printer motherboard supplier or find it in the Klipper repository.

    • Open the Fluidd interface, accessible through a web browser at your phone's IP address, e.g., 192.168.31.124

    • In the Config tab on the left, rename your motherboard configuration file to printer.cfg and overwrite the original file.

    • At the end of printer.cfg, add [include fluidd.cfg].

    • ⚠️ Please do not overwrite or delete the moonraker.conf file on the phone, as this can cause serious errors.

  • Now you have completed the basic configuration. Enjoy!

Convert Your Phone to DC Power Supply ( PCB )

Common Issues and Solutions:

Acknowledgements

  • PostmarketOS
    • Real Linux distribution for phones and other mobile devices
  • Klipper
    • Klipper 3d-Printer firmware. It combines the power of a general purpose computer with one or more micro-controllers.
  • moonraker
    • API Web Server for Klipper
  • KlipperScreen
    • Touchscreen GUI that interfaces with Klipper via Moonraker.
  • fluidd
    • Free and open-source Klipper web interface for managing your 3d printer.

About

Turning Mobile Phones into High Performance Klipper Host for 3D Printers Based on Native Linux

License:GNU General Public License v3.0

Languages

Language:HTML 100.0%Language:Shell 0.0%