(C)2012-2015 Freematics.com
OBD-II Adapter for Arduino is a product that works as a vehicle OBD-II data bridge for Arduino (literally all embedded platforms) with open-source Arduino library provided. Besides providing easy-to-use OBD-II data access, it also integrates 6-axis or 9-axis MEMS sensor module and a voltmeter for measuring vehicle battery power. The adapter draws power from OBD-II port and convert it to 5V for powering attached device.
OBD-II Adapter: http://freematics.com/pages/products/arduino-obd-adapter/
OBD-II Telematics DIY Kit: http://freematics.com/pages/products/arduino-telematics-kit-3/
Most commonly use PIDs are defined in OBD library as followings.
Engine
PID_RPM – Engine RPM (rpm)
PID_ENGINE_LOAD – Calculated engine load (%)
PID_COOLANT_TEMP – Engine coolant temperature (°C)
PID_ENGINE_LOAD – Calculated Engine load (%)
PID_ABSOLUTE_ENGINE_LOAD – Absolute Engine load (%)
PID_TIMING_ADVANCE – Ignition timing advance (°)
PID_ENGINE_OIL_TEMP – Engine oil temperature (°C)
PID_ENGINE_TORQUE_PERCENTAGE – Engine torque percentage (%)
PID_ENGINE_REF_TORQUE – Engine reference torque (Nm)
Intake/Exhaust
PID_INTAKE_TEMP – Intake temperature (°C)
PID_INTAKE_PRESSURE – Intake manifold absolute pressure (kPa)
PID_MAF_FLOW – MAF flow pressure (grams/s)
PID_BAROMETRIC – Barometric pressure (kPa)
Speed/Time
PID_SPEED – Vehicle speed (km/h)
PID_RUNTIME – Engine running time (second)
PID_DISTANCE – Vehicle running distance (km)
Driver
PID_THROTTLE – Throttle position (%)
PID_AMBIENT_TEMP – Ambient temperature (°C)
Electric Systems
PID_CONTROL_MODULE_VOLTAGE – vehicle control module voltage (V)
PID_HYBRID_BATTERY_PERCENTAGE – Hybrid battery pack remaining life (%)
Additional defines can be added to access other OBD-II PIDs.
libraries - all Arduino libraries needed for OBD-II adapter and kits
samples - several simple sketches for testing purpose
nanologger - OBD-II data logger working with 128x64 monochrome OLED display (for Arduino Nano)
megalogger - OBD-II and GPS data logger based on 320x240 TFT LCD display (for Arduino MEGA)
tester - a testing sketch for OBD-II communication and capability
utilites - useful utility source code for development