An Arduino library for the 9-axis accelerometer, gyroscope and magnetometer. It contains many example sketches with lots of comments to make it easy to use.
For further information visit my blog:
https://wolles-elektronikkiste.de/mpu9250-9-achsen-sensormodul-teil-1 (German)
https://wolles-elektronikkiste.de/en/mpu9250-9-axis-sensor-module-part-1 (English)
If you find bugs please inform me. If you like the library it would be great if you could give it a star.
If you are not familiar with the MPU9250 I recommend to work through the example sketches in the following order:
- MPU9250_acceleration_data.ino
- MPU9250_gyroscope_data.ino
- MPU9250_calibration.ino
- MPU9250_magnetometer_data.ino
- MPU9250_all_data.ino
- MPU9250_angles_and_orientation.ino
- MPU9250_pitch_and_roll.ino
- MPU9250_data_ready_interrupt_and_cycle.ino
- MPU9250_wake_on_motion_interrupt.ino
- MPU9250_FIFO_stop_when_full.ino
- MPU9250_FIFO_continuous.ino
The sketch MPU9250_blank_all_settings.ino can be used as a basis for your own sketches. It contains all setting options.