uhi22

pyPLC

Electric vehicle CCS charging investigations with Python

foccci

Fully Open CCS Charge Controller Interface with QCA7005 PLC modem

ccs32clara

STM32 with QCA7005 as CCS charge controller

ccs32

WT32-ETH01 with tpLink HomePlug modem as CCS charge controller

ccs32berta

ESP32 talks via SPI with QCA7005 PLC modem

IoniqMotorCAN

CAN bus node for Hyundai Ioniq motor CAN

Ioniq28Investigations

wifican

Bridge between Wifi and CAN. Minimal variant of the ESP32RET. Using ESP32s3

OpenV2Gx

Fork from the Martin-P/OpenV2G with the goal to provide an universal command line interface. This is used in the python part of the CCS project, see https://github.com/uhi22/pyPLC.

canguin

canguin - The CAN GUI (new)

clara-logs

Logfiles of ccs32clara

TFT-with-CAN

STM32 shows data from CAN on TFT with ILI9341

arduino-lmic-uhi

LoraWAN-MAC-in-C library, adapted to run under the Arduino environment

arduinoDcMotorRegulator

Speed control for small DC motors

dieter

Device Interface ElecTronic Especially not limited to Raspberry

ImpulseGeneratorArduino

Adjustable Power Supply controlled by Arduino, to create voltage ramps and pulses

plctool2

SerialToOLED

OLED Display with Serial input

WallboxArduino

Simple wallbox controller for AC charging of electric vehicle.

arduino-controlpilot-observer

Arduino observes the ControlPilot wire of electrical cars charge port

arduino-uds-over-serial

Arduino is receiving UDS commands over serial line and giving some responses

esp32-web-interface

stepup-test

Experiments with step-up converter

ToneLighter

LED stripe controlled by music, with Arduino pro mini and 433MHz remote control