Welcome to use the Wallet-CLI.
If you need any help, please join the Telegram
Get started
Download wallet-cli
git clone https://github.com/tronprotocol/wallet-cli.git
Edit config.conf in src/main/resources
net {
type = mainnet
# type = testnet
}
fullnode = {
ip.list = [
"fullnode ip : port"
]
}
soliditynode = {
// the IPs in this list can only be totally set to solidity or pBFT.
ip.list = [
"ip : solidity port" // default solidity
]
# ip.list = [
# "ip : pBFT port" // or pBFT
# ]
} // NOTE: solidity node is optional
blockNumberStartToScan = 22690588 // NOTE: this field is optional
Run a web wallet
-
connect to fullNode and solidityNode
Take a look at: java-tron deployment Run both fullNode and solidity node in either your local PC or remote server.
NOTE: These nodes would consume a lot of memory and CPU. Please be aware if you do not use wallet, just kill them.
-
compile and run web wallet
$ cd wallet-cli $ ./gradlew build $ cd build/libs $ java -jar wallet-cli.jar
Connect to java-tron
Wallet-cli connect to java-tron via gRPC protocol, which can be deployed locally or remotely. Check Run a web Wallet section.
We can configure java-tron node IP and port in src/main/resources/config.conf
, so that wallet-cli server can successfully talk to java-tron nodes.
Wallet-cli supported command list
Following is a list of Tron Wallet-cli commands: For more information on a specific command, just type the command on terminal when you start your Wallet.
Type any one of the listed commands, to display how-to tips.
How to freeze/unfreeze balance
After the funds are frozen, the corresponding number of shares and bandwidth will be obtained. Shares can be used for voting and bandwidth can be used for trading. The rules for the use and calculation of share and bandwidth are described later in this article.
Freeze operation is as follows:
> freezeBalance [OwnerAddress] frozen_balance frozen_duration [ResourceCode:0 BANDWIDTH, 1 ENERGY] [receiverAddress]
OwnerAddress
The address of the account that initiated the transaction, optional, default is the address of the login account.
frozen_balance
The amount of frozen funds, the unit is Sun. The minimum value is 1000000 Sun(1TRX).
frozen_duration
Freeze time, this value is currently only allowed for 3 days.
For example:
> freezeBalance 100000000 3 1 address
After the freeze operation, frozen funds will be transferred from Account Balance to Frozen, You can view frozen funds from your account information. After being unfrozen, it is transferred back to Balance by Frozen, and the frozen funds cannot be used for trading.
When more share or bandwidth is needed temporarily, additional funds may be frozen to obtain additional share and bandwidth. The unfrozen time is postponed until 3 days after the last freeze operation
After the freezing time expires, funds can be unfroze.
Unfreeze operation is as follows:
> unfreezeBalance [OwnerAddress] ResourceCode(0 BANDWIDTH, 1 CPU) [receiverAddress]
How to vote
Voting requires share. Share can be obtained by freezing funds.
- The share calculation method is: 1 unit of share can be obtained for every 1TRX frozen.
- After unfreezing, previous vote will expire. You can avoid the invalidation of the vote by re-freezing and voting.
NOTE The Tron Network only records the status of your last vote, which means that each of your votes will overwrite all previous voting results.
For example:
> freezeBalance 100000000 3 1 address # Freeze 10TRX and acquire 10 units of shares
> votewitness 123455 witness1 4 witness2 6 # Cast 4 votes for witness1 and 6 votes for witness2 at the same time
> votewitness 123455 witness1 10 # Voted 10 votes for witness1
The final result of the above command was 10 votes for witness1 and 0 vote for witness2.
Brokerage
After voting for the witness, you will receive the rewards. The witness has the right to decide the ratio of brokerage. The default ratio is 20%, and the witness can adjust it.
By default, if a witness is rewarded, he will receive 20% of the whole rewards, and 80% of the rewards will be distributed to his voters.
GetBrokerage
View the ratio of brokerage of the witness.
> getbrokerage OwnerAddress
OwnerAddress
The address of the witness's account, it is a base58check type address.
GetReward
Query unclaimed reward.
> getreward OwnerAddress
OwnerAddress
The address of the voter's account, it is a base58check type address.
UpdateBrokerage
Update the ratio of brokerage, this command is usually used by a witness account.
> updateBrokerage OwnerAddress brokerage
OwnerAddress
The address of the witness's account, it is a base58check type address.
brokerage
The ratio of brokerage you want to update to, the limit of it: 0-100.
For example:
> getbrokerage TZ7U1WVBRLZ2umjizxqz3XfearEHhXKX7h
> getreward TNfu3u8jo1LDWerHGbzs2Pv88Biqd85wEY
> updateBrokerage TZ7U1WVBRLZ2umjizxqz3XfearEHhXKX7h 30
How to calculate bandwidth
The bandwidth calculation rule is:
constant * FrozenFunds * days
Assuming freeze 1TRX(1_000_000 Sun), 3 days, bandwidth obtained = 1 * 1_000_000 * 3 = 3_000_000.
All contracts consume bandwidth, including transferring, transferring of assets, voting, freezing, etc. Querying does not consume bandwidth. Each contract needs to consume 100_000 bandwidth.
If a contract exceeds a certain time (10s), this operation does not consume bandwidth.
When the unfreezing operation occurs, the bandwidth is not cleared. The next time the freeze is performed, the newly added bandwidth is accumulated.
How to withdraw balance
After each block is produced, the block award is sent to the account's allowance, and a withdraw operation is allowed every 24 hours from allowance to balance. The funds in allowance cannot be locked or traded.
How to create witness
Applying to become a witness account needs to consume 100_000TRX. This part of the funds will be burned directly.
How to create account
It is not allowed to create accounts directly. You can only create accounts by transferring funds to non-existing accounts. Transferring to a non-existent account has minimum restriction amount of 1TRX.
Command line operation flow example
$ cd wallet-cli
$ ./gradlew build
$ ./gradlew run
> RegisterWallet 123456 (password = 123456)
> login 123456
> getAddress
address = TRfwwLDpr4excH4V4QzghLEsdYwkapTxnm' # backup it!
> BackupWallet 123456
priKey = 075725cf903fc1f6d6267b8076fc2c6adece0cfd18626c33427d9b2504ea3cef' # backup it!!! (BackupWallet2Base64 option)
> getbalance
Balance = 0
> AssetIssue TestTRX TRX 75000000000000000 1 1 2 "2019-10-02 15:10:00" "2020-07-11" "just for test121212" www.test.com 100 100000 10000 10 10000 1
> getaccount TRfwwLDpr4excH4V4QzghLEsdYwkapTxnm
(Print balance: 9999900000
"assetV2": [
{
"key": "1000001",
"value": 74999999999980000
}
],)
# (cost trx 1000 trx for assetIssue)
# (You can query the trx balance and other asset balances for any account )
> TransferAsset TWzrEZYtwzkAxXJ8PatVrGuoSNsexejRiM 1000001 10000
How to issue a TRC10 token
Each account can only issue ONE TRC10 token.
Issue TRC10 tokens
> AssetIssue [OwnerAddress] AssetName AbbrName TotalSupply TrxNum AssetNum Precision StartDate EndDate Description Url FreeNetLimitPerAccount PublicFreeNetLimit FrozenAmount0 FrozenDays0 [...] FrozenAmountN FrozenDaysN
OwnerAddress (optional)
The address of the account which initiated the transaction. Default: the address of the login account.
AssetName
The name of the issued TRC10 token
AbbrName
The abbreviation of TRC10 token
TotalSupply
TotalSupply = Account Balance of Issuer + All Frozen Token Amount TotalSupply: Total Issuing Amount Account Balance Of Issuer: At the time of issuance All Frozen Token Amount: Before asset transfer and the issuance
TrxNum, AssetNum
These two parameters determine the exchange rate when the token is issued. Exchange Rate = TrxNum / AssetNum AssetNum: Unit in base unit of the issued token TrxNum: Unit in SUN (0.000001 TRX)
Precision
Precision to how many decimal places
FreeNetLimitPerAccount
The maximum amount of bandwidth each account is allowed to use. Token issuers can freeze TRX to obtain bandwidth (TransferAssetContract only)
PublicFreeNetLimit
The maximum total amount of bandwidth which is allowed to use for all accounts. Token issuers can freeze TRX to obtain bandwidth (TransferAssetContract only)
StartDate, EndDate
The start and end date of token issuance. Within this period time, other users can participate in token issuance.
FrozenAmount0 FrozenDays0
Amount and days of token freeze. FrozenAmount0: Must be bigger than 0 FrozenDays0: Must between 1 and 3653.
Example:
> AssetIssue TestTRX TRX 75000000000000000 1 1 2 "2019-10-02 15:10:00" "2020-07-11" "just for test121212" www.test.com 100 100000 10000 10 10000 1
> GetAssetIssueByAccount TRGhNNfnmgLegT4zHNjEqDSADjgmnHvubJ # View published information
{
"assetIssue": [
{
"owner_address": "TRGhNNfnmgLegT4zHNjEqDSADjgmnHvubJ",
"name": "TestTRX",
"abbr": "TRX",
"total_supply": 75000000000000000,
"frozen_supply": [
{
"frozen_amount": 10000,
"frozen_days": 1
},
{
"frozen_amount": 10000,
"frozen_days": 10
}
],
"trx_num": 1,
"precision": 2,
"num": 1,
"start_time": 1570000200000,
"end_time": 1594396800000,
"description": "just for test121212",
"url": "www.test.com",
"free_asset_net_limit": 100,
"public_free_asset_net_limit": 100000,
"id": "1000001"
}
]
}
Update parameters of TRC10 token
> UpdateAsset [OwnerAddress] newLimit newPublicLimit description url
Specific meaning of the parameters is the same as that of AssetIssue.
Example:
> UpdateAsset 1000 1000000 "change description" www.changetest.com
> GetAssetIssueByAccount TRGhNNfnmgLegT4zHNjEqDSADjgmnHvubJ # View the modified information
{
"assetIssue": [
{
"owner_address": "TRGhNNfnmgLegT4zHNjEqDSADjgmnHvubJ",
"name": "TestTRX",
"abbr": "TRX",
"total_supply": 75000000000000000,
"frozen_supply": [
{
"frozen_amount": 10000,
"frozen_days": 1
},
{
"frozen_amount": 10000,
"frozen_days": 10
}
],
"trx_num": 1,
"precision": 2,
"num": 1,
"start_time": 1570000200000,
"end_time": 1594396800000,
"description": "change description",
"url": "www.changetest.com",
"free_asset_net_limit": 1000,
"public_free_asset_net_limit": 1000000,
"id": "1000001"
}
]
}
TRC10 token transfer
> TransferAsset [OwnerAddress] ToAddress AssertID Amount
OwnerAddress (optional)
The address of the account which initiated the transaction. Default: the address of the login account.
ToAddress
Address of the target account
AssertName
TRC10 token ID Example: 1000001
Amount
The number of TRC10 token to transfer
Example:
> TransferAsset TN3zfjYUmMFK3ZsHSsrdJoNRtGkQmZLBLz 1000001 1000
> getaccount TN3zfjYUmMFK3ZsHSsrdJoNRtGkQmZLBLz # View target account information after the transfer
address: TN3zfjYUmMFK3ZsHSsrdJoNRtGkQmZLBLz
assetV2
{
id: 1000001
balance: 1000
latest_asset_operation_timeV2: null
free_asset_net_usageV2: 0
}
Participating in the issue of TRC10 token
> ParticipateAssetIssue [OwnerAddress] ToAddress AssetID Amount
OwnerAddress (optional)
The address of the account which initiated the transaction. Default: the address of the login account.
ToAddress
Account address of TRC10 issuers
AssertName
TRC10 token ID Example: 1000001
Amount
The number of TRC10 token to transfers
The participation process must happen during the release of TRC10, otherwise an error may occur.
Example:
> ParticipateAssetIssue TRGhNNfnmgLegT4zHNjEqDSADjgmnHvubJ 1000001 1000
> getaccount TJCnKsPa7y5okkXvQAidZBzqx3QyQ6sxMW # View remaining balance
address: TJCnKsPa7y5okkXvQAidZBzqx3QyQ6sxMW
assetV2
{
id: 1000001
balance: 1000
latest_asset_operation_timeV2: null
free_asset_net_usageV2: 0
}
Unfreeze TRC10 token
To unfreeze all TRC10 token which are supposed to be unfrozen after the freezing period.
> unfreezeasset [OwnerAddress]
How to obtain TRC10 token information
ListAssetIssue
Obtain all of the published TRC10 token information
GetAssetIssueByAccount
Obtain TRC10 token information based on issuing address
GetAssetIssueById
Obtain TRC10 token Information based on ID
GetAssetIssueByName
Obtain TRC10 token Information based on names
GetAssetIssueListByName
Obtain a list of TRC10 token information based on names
How to operate with proposal
Any proposal-related operations, except for viewing operations, must be performed by committee members.
Initiate a proposal
> createProposal [OwnerAddress] id0 value0 ... idN valueN
OwnerAddress (optional)
The address of the account which initiated the transaction. Default: the address of the login account.
id0
The serial number of the parameter. Every parameter of TRON network has a serial number. Please refer to "http://tronscan.org/#/sr/committee"
Value0
The modified value
In the example, modification No.4 (modifying token issuance fee) costs 1000TRX as follows:
> createProposal 4 1000
> listproposals # View initiated proposal
{
"proposals": [
{
"proposal_id": 1,
"proposer_address": "TRGhNNfnmgLegT4zHNjEqDSADjgmnHvubJ",
"parameters": [
{
"key": 4,
"value": 1000
}
],
"expiration_time": 1567498800000,
"create_time": 1567498308000
}
]
}
The corresponding id is 1.
Approve / Disapprove a proposal
> approveProposal [OwnerAddress] id is_or_not_add_approval
OwnerAddress (optional)
The address of the account which initiated the transaction. Default: the address of the login account.
id
ID of the initiated proposal Example: 1
is_or_not_add_approval
true for approve; false for disapprove
Example:
> ApproveProposal 1 true # in favor of the offer
> ApproveProposal 1 false # Cancel the approved proposal
Delete an existed proposal
> deleteProposal [OwnerAddress] proposalId
proposalId
ID of the initiated proposal Example: 1
The proposal must be canceled by the supernode that initiated the proposal.
Example:
> DeleteProposal 1
Obtain proposal information
ListProposals
Obtain a list of initiated proposals
ListProposalsPaginated
Use the paging mode to obtain the initiated proposal
GetProposal
Obtain proposal information based on the proposal ID
How to trade on the exchange
The trading and price fluctuations of trading pairs are in accordance with the Bancor Agreement, which can be found in TRON's related documents.
Create a trading pair
> exchangeCreate [OwnerAddress] first_token_id first_token_balance second_token_id second_token_balance
OwnerAddress (optional)
The address of the account which initiated the transaction. Default: the address of the login account.
First_token_id, first_token_balance
ID and amount of the first token
second_token_id, second_token_balance
ID and amount of the second token
The ID is the ID of the issued TRC10 token. If it is TRX, the ID is "_". The amount must be greater than 0, and less than 1,000,000,000,000,000.
Example:
> exchangeCreate 1000001 10000 _ 10000
# Create trading pairs with the IDs of 1000001 and TRX, with amount 10000 for both.
Capital injection
> exchangeInject [OwnerAddress] exchange_id token_id quant
OwnerAddress (optional)
The address of the account which initiated the transaction. Default: the address of the login account.
exchange_id
The ID of the trading pair to be funded
token_id, quant
TokenId and quantity (unit in base unit) of capital injection
When conducting a capital injection, depending on its quantity (quant), a proportion of each token in the trading pair will be withdrawn from the account, and injected into the trading pair. Depending on the difference in the balance of the transaction, the same amount of money for the same token would vary.
Transactions
> exchangeTransaction [OwnerAddress] exchange_id token_id quant expected
OwnerAddress (optional)
The address of the account which initiated the transaction. Default: the address of the login account.
exchange_id
ID of the trading pair
token_id, quant
The ID and quantity of tokens being exchanged, equivalent to selling
expected
Expected quantity of another token
expected must be less than quant, or an error will be reported.
Example:
> ExchangeTransaction 1 1000001 100 80
It is expected to acquire the 80 TRX by exchanging 1000001 from the trading pair ID of 1, and the amount is 100.(Equivalent to selling an amount of 100 tokenID - 1000001, at a price of 80 TRX, in trading pair ID - 1).
Capital Withdrawal
> exchangeWithdraw [OwnerAddress] exchange_id token_id quant
OwnerAddress (optional)
The address of the account which initiated the transaction. Default: the address of the login account.
Exchange_id
The ID of the trading pair to be withdrawn
Token_id, quant
TokenId and quantity (unit in base unit) of capital withdrawal
When conducting a capital withdrawal, depending on its quantity (quant), a proportion of each token in the transaction pair is withdrawn from the trading pair, and injected into the account. Depending on the difference in the balance of the transaction, the same amount of money for the same token would vary.
Obtain information on trading pairs
ListExchanges
List trading pairs
ListExchangesPaginated
List trading pairs by page
How to use the multi-signature feature of wallet-cli?
Multi-signature allows other users to access the account in order to better manage it. There are three types of accesses:
- owner: access to the owner of account
- active: access to other features of accounts, and access that authorizes a certain feature. Block production authorization is not included if it's for witness purposes.
- witness: only for witness, block production authorization will be granted to one of the other users.
The rest of the users will be granted
> Updateaccountpermission TRGhNNfnmgLegT4zHNjEqDSADjgmnHvubJ \
{
"owner_permission": {
"type": 0,
"permission_name": "owner",
"threshold": 1,
"keys": [
{
"address": "TRGhNNfnmgLegT4zHNjEqDSADjgmnHvubJ",
"weight": 1
}
]
},
"witness_permission": {
"type": 1,
"permission_name": "owner",
"threshold": 1,
"keys": [
{
"address": "TRGhNNfnmgLegT4zHNjEqDSADjgmnHvubJ",
"weight": 1
}
]
},
"active_permissions": [
{
"type": 2,
"permission_name": "active12323",
"threshold": 2,
"operations": "7fff1fc0033e0000000000000000000000000000000000000000000000000000",
"keys": [
{
"address": "TNhXo1GbRNCuorvYu5JFWN3m2NYr9QQpVR",
"weight": 1
},
{
"address": "TKwhcDup8L2PH5r6hxp5CQvQzZqJLmKvZP",
"weight": 1
}
]
}
]
}
The account TRGhNNfnmgLegT4zHNjEqDSADjgmnHvubJ gives the owner access to itself, active access to TNhXo1GbRNCuorvYu5JFWN3m2NYr9QQpVR and TKwhcDup8L2PH5r6hxp5CQvQzZqJLmKvZP. Active access will need signatures from both accounts in order to take effect.
If the account is not a witness, it's not necessary to set witness_permission, otherwise an error will occur.
Signed transaction
> SendCoin TJCnKsPa7y5okkXvQAidZBzqx3QyQ6sxMW 10000000000000000
Will show "Please confirm and input your permission id, if input y or Y means default 0, other non-numeric characters will cancel transaction."
This will require the transfer authorization of active access. Enter: 2
Then select accounts and put in local password, i.e. TNhXo1GbRNCuorvYu5JFWN3m2NYr9QQpVR needs a private key TNhXo1GbRNCuorvYu5JFWN3m2NYr9QQpVR to sign a transaction.
Select another account and enter the local password. i.e. TKwhcDup8L2PH5r6hxp5CQvQzZqJLmKvZP will need a private key of TKwhcDup8L2PH5r6hxp5CQvQzZqJLmKvZP to sign a transaction.
The weight of each account is 1, threshold of access is 2. When the requirements are met, users will be notified with “Send 10000000000000000 Sun to TJCnKsPa7y5okkXvQAidZBzqx3QyQ6sxMW successful !!”.
This is how multiple accounts user multi-signature when using the same cli. Use the instruction addTransactionSign according to the obtained transaction hex string if signing at multiple cli. After signing, the users will need to broadcast final transactions manually.
Obtain weight information according to transaction
> getTransactionSignWeight
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
The information displays as follows:
{
"result":{
"code":"PERMISSION_ERROR",
"message":"Signature count is 2 more than key counts of permission : 1"
},
"permission":{
"operations":"7fff1fc0033e0100000000000000000000000000000000000000000000000000",
"keys":[
{
"address":"TRGhNNfnmgLegT4zHNjEqDSADjgmnHvubJ",
"weight":1
}
],
"threshold":1,
"id":2,
"type":"Active",
"permission_name":"active"
},
"transaction":{
"result":{
"result":true
},
"txid":"7da63b6a1f008d03ef86fa871b24a56a501a8bbf15effd7aca635de6c738df4b",
"transaction":{
"signature":[
"c18ca91f1533ecdd83041eb0005683c4a39a2310ec60456b1f0075b4517443cf4f601a69788f001d4bc03872e892a5e25c618e38e7b81b8b1e69d07823625c2b01",
"3d61eb0f8868990cfa138b19878e607af957c37b51961d8be16168d7796675384e24043d121d01569895fcc7deb37648c59f538a8909115e64da167ff659c26101"
],
"txID":"7da63b6a1f008d03ef86fa871b24a56a501a8bbf15effd7aca635de6c738df4b",
"raw_data":{
"contract":[
{
"parameter":{
"value":{
"amount":10000000000000000,
"owner_address":"TRGhNNfnmgLegT4zHNjEqDSADjgmnHvubJ",
"to_address":"TJCnKsPa7y5okkXvQAidZBzqx3QyQ6sxMW"
},
"type_url":"type.googleapis.com/protocol.TransferContract"
},
"type":"TransferContract",
"Permission_id":2
}
],
"ref_block_bytes":"0318",
"ref_block_hash":"60e195d3609c8661",
"expiration":1554123306262,
"timestamp":1554101706260
},
"raw_data_hex":"0a020318220860e195d3609c86614096eadec79d2d5a6e080112680a2d747970652e676f6f676c65617069732e636f6d2f70726f746f636f6c2e5472616e73666572436f6e747261637412370a1541a7d8a35b260395c14aa456297662092ba3b76fc01215415a523b449890854c8fc460ab602df9f31fe4293f18808084fea6dee11128027094bcb8bd9d2d"
}
}
}
Get signature information according to transactions
> getTransactionApprovedList
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
{
"result":{
},
"approved_list":[
"TKwhcDup8L2PH5r6hxp5CQvQzZqJLmKvZP",
"TNhXo1GbRNCuorvYu5JFWN3m2NYr9QQpVR"
],
"transaction":{
"result":{
"result":true
},
"txid":"7da63b6a1f008d03ef86fa871b24a56a501a8bbf15effd7aca635de6c738df4b",
"transaction":{
"signature":[
"c18ca91f1533ecdd83041eb0005683c4a39a2310ec60456b1f0075b4517443cf4f601a69788f001d4bc03872e892a5e25c618e38e7b81b8b1e69d07823625c2b01",
"3d61eb0f8868990cfa138b19878e607af957c37b51961d8be16168d7796675384e24043d121d01569895fcc7deb37648c59f538a8909115e64da167ff659c26101"
],
"txID":"7da63b6a1f008d03ef86fa871b24a56a501a8bbf15effd7aca635de6c738df4b",
"raw_data":{
"contract":[
{
"parameter":{
"value":{
"amount":10000000000000000,
"owner_address":"TRGhNNfnmgLegT4zHNjEqDSADjgmnHvubJ",
"to_address":"TJCnKsPa7y5okkXvQAidZBzqx3QyQ6sxMW"
},
"type_url":"type.googleapis.com/protocol.TransferContract"
},
"type":"TransferContract",
"Permission_id":2
}
],
"ref_block_bytes":"0318",
"ref_block_hash":"60e195d3609c8661",
"expiration":1554123306262,
"timestamp":1554101706260
},
"raw_data_hex":"0a020318220860e195d3609c86614096eadec79d2d5a6e080112680a2d747970652e676f6f676c65617069732e636f6d2f70726f746f636f6c2e5472616e73666572436f6e747261637412370a1541a7d8a35b260395c14aa456297662092ba3b76fc01215415a523b449890854c8fc460ab602df9f31fe4293f18808084fea6dee11128027094bcb8bd9d2d"
}
}
}
How to use smart contract
deploy smart contracts
> DeployContract [ownerAddress] contractName ABI byteCode constructor params isHex fee_limit consume_user_resource_percent origin_energy_limit value token_value token_id(e.g: TRXTOKEN, use # if don't provided) <library:address,library:address,...> <lib_compiler_version(e.g:v5)> library:address,...>
OwnerAddress
The address of the account that initiated the transaction, optional, default is the address of the login account.
contractName
Name of smart contract
ABI
Compile generated ABI code
byteCode
Compile generated byte code
constructor, params, isHex
Define the format of the bytecode, which determines the way to parse byteCode from parameters
fee_limit
Transaction allows for the most consumed TRX
consume_user_resource_percent
Percentage of user resource consumed, in the range [0, 100]
origin_energy_limit
The most amount of developer Energy consumed by trigger contract once
value
The amount of trx transferred to the contract account
token_value
Number of TRX10
token_id
TRX10 Id
Example:
> deployContract normalcontract544 [{"constant":false,"inputs":[{"name":"i","type":"uint256"}],"name": "findArgsByIndexTest","outputs":[{"name":"z","type":"uint256"}],"payable":false,"stateMutability":"nonpayable","type":"function"}]
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 # # false 1000000000 75 50000 0 0 #
Get the result of the contract execution with the getTransactionInfoById command:
> getTransactionInfoById 4978dc64ff746ca208e51780cce93237ee444f598b24d5e9ce0da885fb3a3eb9
{
"id": "8c1f57a5e53b15bb0a0a0a0d4740eda9c31fbdb6a63bc429ec2113a92e8ff361",
"fee": 6170500,
"blockNumber": 1867,
"blockTimeStamp": 1567499757000,
"contractResult": [
"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"
],
"contract_address": "TJMKWmC6mwF1QVax8Sy2AcgT6MqaXmHEds",
"receipt": {
"energy_fee": 6170500,
"energy_usage_total": 61705,
"net_usage": 704,
"result": "SUCCESS"
}
}
trigger smart contarct
> TriggerContract [ownerAddress] contractAddress method args isHex fee_limit value token_value token_id
OwnerAddress
The address of the account that initiated the transaction, optional, default is the address of the login account.
contractAddress
Smart contarct address
method
The name of function and parameters, please refer to the example
args
Parameter value, if you want to call
receive
, pass '#' instead
isHex
The format of the parameters method and args, is hex string or not
fee_limit
The most amount of trx allows for the consumption
token_value
Number of TRX10
token_id
TRC10 id, If not, use ‘#’ instead
Example:
> triggerContract TGdtALTPZ1FWQcc5MW7aK3o1ASaookkJxG findArgsByIndexTest(uint256) 0 false
1000000000 0 0 #
# Get the result of the contract execution with the getTransactionInfoById command
> getTransactionInfoById 7d9c4e765ea53cf6749d8a89ac07d577141b93f83adc4015f0b266d8f5c2dec4
{
"id": "de289f255aa2cdda95fbd430caf8fde3f9c989c544c4917cf1285a088115d0e8",
"fee": 8500,
"blockNumber": 2076,
"blockTimeStamp": 1567500396000,
"contractResult": [
""
],
"contract_address": "TJMKWmC6mwF1QVax8Sy2AcgT6MqaXmHEds",
"receipt": {
"energy_fee": 8500,
"energy_usage_total": 85,
"net_usage": 314,
"result": "REVERT"
},
"result": "FAILED",
"resMessage": "REVERT opcode executed"
}
get details of a smart contract
> GetContract contractAddress
contractAddress
smart contract address
Example:
> GetContract TGdtALTPZ1FWQcc5MW7aK3o1ASaookkJxG
{
"origin_address": "TRGhNNfnmgLegT4zHNjEqDSADjgmnHvubJ",
"contract_address": "TJMKWmC6mwF1QVax8Sy2AcgT6MqaXmHEds",
"abi": {
"entrys": [
{
"name": "findArgsByIndexTest",
"inputs": [
{
"name": "i",
"type": "uint256"
}
],
"outputs": [
{
"name": "z",
"type": "uint256"
}
],
"type": "Function",
"stateMutability": "Nonpayable"
}
]
},
"bytecode": "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",
"consume_user_resource_percent": 75,
"name": "normalcontract544",
"origin_energy_limit": 50000,
"code_hash": "23423cece3b4866263c15357b358e5ac261c218693b862bcdb90fa792d5714e6"
}
update smart contract parameters
> UpdateEnergyLimit [ownerAddress] contract_address energy_limit # Update parameter energy_limit
> UpdateSetting [ownerAddress] contract_address consume_user_resource_percent # Update parameter consume_user_resource_percent
How to delegate resource
delegate resource
> freezeBalance [OwnerAddress] frozen_balance frozen_duration [ResourceCode:0 BANDWIDTH, 1 ENERGY] [receiverAddress]
The latter two parameters are optional parameters. If not set, the TRX is frozen to obtain resources for its own use; if it is not empty, the acquired resources are used by receiverAddress.
OwnerAddress
The address of the account that initiated the transaction, optional, default is the address of the login account.
frozen_balance
The amount of frozen TRX, the unit is the smallest unit (Sun), the minimum is 1000000sun.
frozen_duration
frezen duration, 3 days
ResourceCode
0 BANDWIDTH;1 ENERGY
receiverAddress
target account address
unfreeze delegated resource
> unfreezeBalance [OwnerAddress] ResourceCode(0 BANDWIDTH, 1 CPU) [receiverAddress]
The latter two parameters are optional. If they are not set, the BANDWIDTH resource is unfreeze by default; when the receiverAddress is set, the delegate resources are unfreezed.
get resource delegation information
getDelegatedResource fromAddress toAddress
get the information from the fromAddress to the toAddress resource delegate
getDelegatedResourceAccountIndex address
get the information that address is delegated to other account resources
Wallet related commands
RegisterWallet
Register your wallet, you need to set the wallet password and generate the address and private key.
BackupWallet
Back up your wallet, you need to enter your wallet password and export the private key.hex string format, such as: 721d63b074f18d41c147e04c952ec93467777a30b6f16745bc47a8eae5076545
BackupWallet2Base64
Back up your wallet, you need to enter your wallet password and export the private key.base64 format, such as: ch1jsHTxjUHBR+BMlS7JNGd3ejC28WdFvEeo6uUHZUU=
ChangePassword
Modify the password of an account
ImportWallet
Import wallet, you need to set a password, hex String format
ImportWalletByBase64
Import wallet, you need to set a password, base64 fromat
Account related commands
GenerateAddress
Generate an address and print out the public and private keys
GetAccount
Get account information based on address
GetAccountNet
The usage of bandwidth
GetAccountResource
The usage of bandwidth and energy
GetAddress
Get the address of the current login account
GetBalance
Get the balance of the current login account
How to get transaction information
GetTransactionById
Get transaction information based on transaction id
GetTransactionCountByBlockNum
Get the number of transactions in the block based on the block height
GetTransactionInfoById
Get transaction-info based on transaction id, generally used to check the result of a smart contract trigger
GetTransactionInfoByBlockNum
Get the list of transaction information in the block based on the block height
How to get block information
GetBlock
Get the block according to the block number; if you do not pass the parameter, get the latest block
GetBlockById
Get block based on blockID
GetBlockByLatestNum n
Get the latest n blocks, where 0 < n < 100
GetBlockByLimitNext startBlockId endBlockId
Get the block in the range [startBlockId, endBlockId)
Some others
GetNextMaintenanceTime
Get the start time of the next maintain period
ListNodes
Get other peer information
ListWitnesses
Get all miner node information
BroadcastTransaction
Broadcast the transaction, where the transaction is in hex string format.
How to transfer shielded TRC20 token
If you want to try to transfer shielded TRC20 token, you'd better set the blockNumberStartToScan
field in config.conf
file.
This field is used to set the starting block that the wallet needs to scan. If you ignore this field, or set it to 0,
the notes you receive will probably take a long time to show up in the wallet. It is recommended that this field is
set to the block number in which the earliest relevant shielded contract was created. If the exact number is not known,
this field can be set as follows. If used in mainnet, please set 22690588. If used in Nile testnet, please set 6380000.
Otherwise, please set 0.
When you begin to transfer TRC20 token to shielded address, you must have a shielded address. The following commands help to generate shielded account.
GetSpendingKey
Generate a sk
Example:
> GetSpendingKey
0eb458b309fa544066c40d80ce30a8002756c37d2716315c59a98c893dbb5f6a
GetExpandedSpendingKey
> GetExpandedSpendingKey sk
Generate ask, nsk, ovk from sk
Example:
> GetExpandedSpendingKey 0eb458b309fa544066c40d80ce30a8002756c37d2716315c59a98c893dbb5f6a
ask:252a0f6f6f0bac114a13e1e663d51943f1df9309649400218437586dea78260e
nsk:5cd2bc8d9468dbad26ea37c5335a0cd25f110eaf533248c59a3310dcbc03e503
ovk:892a10c1d3e8ea22242849e13f177d69e1180d1d5bba118c586765241ba2d3d6
GetAkFromAsk
> GetAkFromAsk ask
Generate ak from ask
Example:
> GetAkFromAsk 252a0f6f6f0bac114a13e1e663d51943f1df9309649400218437586dea78260e
ak:f1b843147150027daa5b522dd8d0757ec5c8c146defd8e01b62b34cf917299f1
GetNkFromNsk
> GetNkFromNsk nsk
Generate nk from nsk
Example:
> GetNkFromNsk 5cd2bc8d9468dbad26ea37c5335a0cd25f110eaf533248c59a3310dcbc03e503
nk:ed3dc885049f0a716a4de8c08c6cabcad0da3c437202341aa3d9248d8eb2b74a
GetIncomingViewingKey
> GetIncomingViewingKey ak[64] nk[64]
Generate ivk from ak and nk
Example:
> Getincomingviewingkey f1b843147150027daa5b522dd8d0757ec5c8c146defd8e01b62b34cf917299f1
ed3dc885049f0a716a4de8c08c6cabcad0da3c437202341aa3d9248d8eb2b74a
ivk:148cf9e91f1e6656a41dc9b6c6ee4e52ff7a25b25c2d4a3a3182d0a2cd851205
GetDiversifier
Generate a diversifier
Example:
> GetDiversifier
11db4baf6bd5d5afd3a8b5
GetShieldedPaymentAddress
> GetShieldedPaymentAddress ivk[64] d[22]
Generate a shielded address from ivk and d
Example:
> GetShieldedPaymentAddress 148cf9e91f1e6656a41dc9b6c6ee4e52ff7a25b25c2d4a3a3182d0a2cd851205
11db4baf6bd5d5afd3a8b5
pkd:65c11642115d386ed716b9cc06a3498e86e303d7f20d0869c9de90e31322ac15
shieldedAddress:ztron1z8d5htmt6h26l5agk4juz9jzz9wnsmkhz6uucp4rfx8gdccr6leq6zrfe80fpccny2kp2cray8z
SetShieldedTRC20ContractAddress
> SetShieldedTRC20ContractAddress TRC20ContractAddress ShieldedContractAddress
TRC20ContractAddress
TRC20 contract address
ShieldedContractAddress
Shielded contract address
Set TRC20 contract address and shielded contract address. Please execute this command before you perform all the following operations related to the shielded transaction of TRC20 token except ScanShieldedTRC20NoteByIvk
and ScanShieldedTRC20NoteByOvk
.
When you execute this command, the Scaling Factor
will be shown. The Scaling Factor
is set in
the shielded contract.
Example:
> SetShieldedTRC20ContractAddress TLDxNTzNvEPd4gHox8V1zK2w82LFnideKE TKERuAmhJh8vZi1dzJtx8926xeCT74747e
scalingFactor():ed3437f8
SetShieldedTRC20ContractAddress succeed!
The Scaling Factor is 1000
That means:
No matter you MINT, TRANSFER or BURN, the value must be an integer multiple of 1000
LoadShieldedTRC20Wallet
Load TRC20 shielded address, shielded note and start to scan by ivk.
Example:
> LoadShieldedTRC20Wallet
Please input your password for shieldedTRC20 wallet.
> *******
LoadShieldedTRC20Wallet successful !!!
GenerateShieldedTRC20Address
> GenerateShieldedTRC20Address number
number
The number of TRC20 shielded addresses, the default is 1.
Generate TRC20 shielded addresses.
Example:
> GenerateShieldedTRC20Address 3
ShieldedTRC20Address list:
ztron1da9rnkmnzl89kqq87gzh534xmkdhq9cnm0j39lackskrhflfe9d26chnq3adl86es0jm2098hzc
ztron1mm20lkcpj6tx6jfd6ek5fxkgmpk9f2hda6vxdtkwlzr45ez32wa7dt8uka9xwfqamr7zyk7jpzf
ztron109r3w5gpm0qcf67r67a9ftjt3zy9wmzux4fqgtgcql8gwhcmauv5dm6t9t9x9ht7h3lvs8shxhq
GenerateShieldedTRC20Address successful !!!
ListShieldedTRC20Address
Display cached local TRC20 shielded address list.
Example:
> ListShieldedTRC20Address
ShieldedTRC20Address :
ztron1mm20lkcpj6tx6jfd6ek5fxkgmpk9f2hda6vxdtkwlzr45ez32wa7dt8uka9xwfqamr7zyk7jpzf
ztron109r3w5gpm0qcf67r67a9ftjt3zy9wmzux4fqgtgcql8gwhcmauv5dm6t9t9x9ht7h3lvs8shxhq
ztron1da9rnkmnzl89kqq87gzh534xmkdhq9cnm0j39lackskrhflfe9d26chnq3adl86es0jm2098hzc
ztron1tjgkfk9hgrl0u6d07w3hq0s9jtgq9q64vek3e5l447dmnzhe27yy0ftpee45h07sa092wkrgrjl
ztron15t3c27a5ve43ssflqepa8dke36vzvccxrren4ma2lghu3hle8rtwltufnvvzrm76w042s9p5f46
SendShieldedTRC20Coin
SendShieldedTRC20Coin fromAmount shieldedInputNum input1 input2 ... publicToAddress toAmount shieldedOutputNum shieldedAddress1 amount1 memo1 shieldedAddress2 amount2 memo2 ....
Shielded transfer, support three types:
- MINT: transfer from one public address to one shielded address, fromAmount should be equal to
the shielded output amount. When you MINT, you need to enter password twice as prompted, one
time is for triggering
approve
method of TRC20 contract that allows the shielded contract can transfer form your account, and other one is for triggeringmint
method of shielded contract that executes MINT. It's important to remember that you must use the same public address to trigger these two methods. - TRANSFER: transfer from one or two shielded address(es) to one or two shielded address(es), the sum of shielded input amount should be equal to the sum of shielded output amount. When you TRANSFER, you need to enter password of public account as prompted, and this is used to trigger 'transfer' method of shielded contract that executes TRANSFER.
- BURN: transfer from one shielded address to one public address and one optional shielded address. If there is no shielded output, toAmount should be equal to the shielded input amount , otherwise, the sum of toAmount and shielded output amount should be equal to the shielded input amount. When you BURN, you need to enter password of public account as prompted, and this is used to trigger 'burn' method of shielded contract that executes BURN.
It's better to use different accounts to trigger BURN, TRANSFER and MINT.
fromAmount
The amount transfer from public address. If the transfer type is MINT, this variable must be equal to the shielded output amount, otherwise it must be 0.
shieldedInputNum
The number of shielded input note, should be 0, 1 or 2. If the transfer type is MINT, this variable must be 0; if BURN, it must be 1.
input1/input2
The index of shielded input note, get from executing command ListShieldedTRC20Note. If shieldedInputNum set to 0, no need to set.
publicToAddress
Public to address. If the transfer type is BURN, this variable must be a valid address, otherwise it should be set null.
toAmount
The amount transfer to public address. If the transfer type is BURN, this variable must be equal to the shielded input amount, otherwise it should be 0.
shieldedOutputNum
The amount of shielded output note. That is the number of (shieldedAddress amount memo) pairs, should be 0, 1 or 2.
shieldedAddress1/shieldedAddress2
Output shielded address
amount1/amount2
The amount transfer to shieldedAddress1/shieldedAddress2
memo1/memo2
The memo of this note, up to 512 bytes, can be set to null if not needed.
Example:
In this example, the scalingFactor is 1000.
-
MINT
In this mode, some variables must be set as follows, shieldedInputNum = 0, publicToAddress = null, toAmount = 0.
> SendShieldedTRC20Coin 1000000000000 0 null 0 1 ztron15t3c27a5ve43ssflqepa8dke36vzvccxrren4ma2lghu3hle8rtwltufnvvzrm76w042s9p5f46 1000000000000 null
-
TRANSFER
In this mode, some variables must be set as follows, fromAmount = 0, publicToAddress = null,toAmount = 0.
Transfer from one shielded address to one shielded address.
> ListShieldedTRC20Note This command will show all the unspent notes. If you want to display all notes, including spent notes and unspent notes, please use command ListShieldedTRC20Note 1 The unspent note list is shown below: 9 ztron1tjgkfk9hgrl0u6d07w3hq0s9jtgq9q64vek3e5l447dmnzhe27yy0ftpee45h07sa092wkrgrjl 2000000000000 23f171f6552680b553707715bead8de807a70255c0b091f7e788bf3b59fe3bea 1 UnSpend 8 ztron15t3c27a5ve43ssflqepa8dke36vzvccxrren4ma2lghu3hle8rtwltufnvvzrm76w042s9p5f46 1000000000000 23f171f6552680b553707715bead8de807a70255c0b091f7e788bf3b59fe3bea 0 UnSpend The Scaling Factor is 1000 No matter you MINT, TRANSFER or BURN, the value must be an integer multiple of 1000 > SendShieldedTRC20Coin 0 1 8 null 0 1 ztron1da9rnkmnzl89kqq87gzh534xmkdhq9cnm0j39lackskrhflfe9d26chnq3adl86es0jm2098hzc 1000000000000 null
Transfer from one shielded address to two shielded addresses.
> ListShieldedTRC20Note This command will show all the unspent notes. If you want to display all notes, including spent notes and unspent notes, please use command ListShieldedTRC20Note 1 The unspent note list is shown below: 9 ztron1tjgkfk9hgrl0u6d07w3hq0s9jtgq9q64vek3e5l447dmnzhe27yy0ftpee45h07sa092wkrgrjl 2000000000000 23f171f6552680b553707715bead8de807a70255c0b091f7e788bf3b59fe3bea 1 UnSpend 10 ztron1da9rnkmnzl89kqq87gzh534xmkdhq9cnm0j39lackskrhflfe9d26chnq3adl86es0jm2098hzc 1000000000000 81a06080f2be3f795c506826e066b9bb5327ca234eb31a0ef2446e11339a3935 0 UnSpend The Scaling Factor is 1000 No matter you MINT, TRANSFER or BURN, the value must be an integer multiple of 1000 > SendShieldedTRC20Coin 0 1 9 null 0 2 ztron1da9rnkmnzl89kqq87gzh534xmkdhq9cnm0j39lackskrhflfe9d26chnq3adl86es0jm2098hzc 1500000000000 test1 ztron1mm20lkcpj6tx6jfd6ek5fxkgmpk9f2hda6vxdtkwlzr45ez32wa7dt8uka9xwfqamr7zyk7jpzf 500000000000 null
Transfer from two shielded addresses to one shielded address.
> ListShieldedTRC20Note This command will show all the unspent notes. If you want to display all notes, including spent notes and unspent notes, please use command ListShieldedTRC20Note 1 The unspent note list is shown below: 11 ztron1da9rnkmnzl89kqq87gzh534xmkdhq9cnm0j39lackskrhflfe9d26chnq3adl86es0jm2098hzc 1500000000000 35901973a96369618e5e3f7f4dcede2b5ddb5bc99bf6feac29f2706420ea99c0 0 UnSpend test1 10 ztron1da9rnkmnzl89kqq87gzh534xmkdhq9cnm0j39lackskrhflfe9d26chnq3adl86es0jm2098hzc 1000000000000 81a06080f2be3f795c506826e066b9bb5327ca234eb31a0ef2446e11339a3935 0 UnSpend 12 ztron1mm20lkcpj6tx6jfd6ek5fxkgmpk9f2hda6vxdtkwlzr45ez32wa7dt8uka9xwfqamr7zyk7jpzf 500000000000 35901973a96369618e5e3f7f4dcede2b5ddb5bc99bf6feac29f2706420ea99c0 1 UnSpend The Scaling Factor is 1000 No matter you MINT, TRANSFER or BURN, the value must be an integer multiple of 1000 > SendShieldedTRC20Coin 0 2 10 11 null 0 1 ztron1mm20lkcpj6tx6jfd6ek5fxkgmpk9f2hda6vxdtkwlzr45ez32wa7dt8uka9xwfqamr7zyk7jpzf 2500000000000 null
Transfer from two shielded addresses to two shielded addresses.
> ListShieldedTRC20Note This command will show all the unspent notes. If you want to display all notes, including spent notes and unspent notes, please use command ListShieldedTRC20Note 1 The unspent note list is shown below: 13 ztron1mm20lkcpj6tx6jfd6ek5fxkgmpk9f2hda6vxdtkwlzr45ez32wa7dt8uka9xwfqamr7zyk7jpzf 2500000000000 6ec74435e32261a6dfe10f9498b3ab5a5cfede7c4e31299752b449b9506efc11 0 UnSpend 12 ztron1mm20lkcpj6tx6jfd6ek5fxkgmpk9f2hda6vxdtkwlzr45ez32wa7dt8uka9xwfqamr7zyk7jpzf 500000000000 35901973a96369618e5e3f7f4dcede2b5ddb5bc99bf6feac29f2706420ea99c0 1 UnSpend The Scaling Factor is 1000 No matter you MINT, TRANSFER or BURN, the value must be an integer multiple of 1000 > SendShieldedTRC20Coin 0 2 12 13 null 0 2 ztron15t3c27a5ve43ssflqepa8dke36vzvccxrren4ma2lghu3hle8rtwltufnvvzrm76w042s9p5f46 1300000000000 null ztron1tjgkfk9hgrl0u6d07w3hq0s9jtgq9q64vek3e5l447dmnzhe27yy0ftpee45h07sa092wkrgrjl 1700000000000 null
-
BURN
In this mode, some variables must be set as follows, fromAmount = 0, shieldedInputNum = 1.
> ListShieldedTRC20Note This command will show all the unspent notes. If you want to display all notes, including spent notes and unspent notes, please use command ListShieldedTRC20Note 1 The unspent note list is shown below: 15 ztron1tjgkfk9hgrl0u6d07w3hq0s9jtgq9q64vek3e5l447dmnzhe27yy0ftpee45h07sa092wkrgrjl 1700000000000 7291b2c58cafb4dede626388f12e846470441f9bb05581221fd742bdd8909a24 1 UnSpend 14 ztron15t3c27a5ve43ssflqepa8dke36vzvccxrren4ma2lghu3hle8rtwltufnvvzrm76w042s9p5f46 1300000000000 7291b2c58cafb4dede626388f12e846470441f9bb05581221fd742bdd8909a24 0 UnSpend The Scaling Factor is 1000 No matter you MINT, TRANSFER or BURN, the value must be an integer multiple of 1000 > SendShieldedTRC20Coin 0 1 14 TDVr15jvAx6maR28tP7RRpxuKZ38tgsyNE 1300000000000000 0 > SendShieldedTRC20Coin 0 1 14 TDVr15jvAx6maR28tP7RRpxuKZ38tgsyNE 300000000000000 1 ztron1mm20lkcpj6tx6jfd6ek5fxkgmpk9f2hda6vxdtkwlzr45ez32wa7dt8uka9xwfqamr7zyk7jpzf 1000000000000000 null
SendShieldedTRC20CoinWithoutAsk
Usage and parameters are consistent with the command SendShieldedTRC20Coin, the only difference is that SendShieldedTRC20Coin uses ask for signature, but SendShieldedTRC20CoinWithoutAsk uses ak.
ListShieldedTRC20Note
> ListShieldedTRC20Note type
type
Shows the type of note. If the variable is omitted or set to 0, it shows all unspent notes; For other values, it shows all the notes, including spent notes and unspent notes.
List the note scanned by the local cache address, and the Scaling Factor
.
NOTE When you load shielded wallet, the wallet will scan blocks to find the notes others send to you in the backend. This will take a long time, so when you run ListShieldedTRC20Note
, your notes will not be displayed immediately.
Example:
> ListShieldedTRC20Note
This command will show all the unspent notes.
If you want to display all notes, including spent notes and unspent notes, please use command ListShieldedTRC20Note 1
The unspent note list is shown below:
15 ztron1tjgkfk9hgrl0u6d07w3hq0s9jtgq9q64vek3e5l447dmnzhe27yy0ftpee45h07sa092wkrgrjl 1700000000000 7291b2c58cafb4dede626388f12e846470441f9bb05581221fd742bdd8909a24 1 UnSpend
The Scaling Factor is 1000
No matter you MINT, TRANSFER or BURN, the value must be an integer multiple of 1000
> ListShieldedTRC20Note 1
All notes are shown below:
ztron1tjgkfk9hgrl0u6d07w3hq0s9jtgq9q64vek3e5l447dmnzhe27yy0ftpee45h07sa092wkrgrjl 1700000000000 7291b2c58cafb4dede626388f12e846470441f9bb05581221fd742bdd8909a24 1 15 UnSpent
ztron15t3c27a5ve43ssflqepa8dke36vzvccxrren4ma2lghu3hle8rtwltufnvvzrm76w042s9p5f46 1000000000000 dc02678b0cf1c93c557dc805edb776fe79201c77f210f08f60cea5d687b14f2e 0 0 Spent
ztron1mm20lkcpj6tx6jfd6ek5fxkgmpk9f2hda6vxdtkwlzr45ez32wa7dt8uka9xwfqamr7zyk7jpzf 1000000000000 e4d35d147762020078d7d197c98fffde181250e4a637d4bdd9ca809116d74131 0 2 Spent
ztron15t3c27a5ve43ssflqepa8dke36vzvccxrren4ma2lghu3hle8rtwltufnvvzrm76w042s9p5f46 1000000000000 1594e1ee06c8420a4f1d80670000cd9268a2ff4e97e3f630909feeb51a9de993 0 3 Spent
ztron15t3c27a5ve43ssflqepa8dke36vzvccxrren4ma2lghu3hle8rtwltufnvvzrm76w042s9p5f46 2000000000000 3f035e966b3ef636ae9c0a0f64bff781b1d1a8b52bab5d8124c0f9162f71f68f 0 1 Spent
ztron1mm20lkcpj6tx6jfd6ek5fxkgmpk9f2hda6vxdtkwlzr45ez32wa7dt8uka9xwfqamr7zyk7jpzf 300000000000 6929757cb86cb6cf3e89df19f3212c3e62070b12d8b36de48e663fed214a4082 0 4 Spent test1
ztron1mm20lkcpj6tx6jfd6ek5fxkgmpk9f2hda6vxdtkwlzr45ez32wa7dt8uka9xwfqamr7zyk7jpzf 2000000000000 e39a1e1d5af7dcbab0d55a63a0c62ec9cc7c0aaf8ce98733802674c3ec1f3a06 0 6 Spent
ztron109r3w5gpm0qcf67r67a9ftjt3zy9wmzux4fqgtgcql8gwhcmauv5dm6t9t9x9ht7h3lvs8shxhq 700000000000 6929757cb86cb6cf3e89df19f3212c3e62070b12d8b36de48e663fed214a4082 1 5 Spent
ztron109r3w5gpm0qcf67r67a9ftjt3zy9wmzux4fqgtgcql8gwhcmauv5dm6t9t9x9ht7h3lvs8shxhq 2300000000000 4ce1ce9f6377ee3cd936757b696ac43ecc39ee6e8a0eab1b8f8ef093e15010f8 0 7 Spent
ztron15t3c27a5ve43ssflqepa8dke36vzvccxrren4ma2lghu3hle8rtwltufnvvzrm76w042s9p5f46 1000000000000 23f171f6552680b553707715bead8de807a70255c0b091f7e788bf3b59fe3bea 0 8 Spent
ztron1tjgkfk9hgrl0u6d07w3hq0s9jtgq9q64vek3e5l447dmnzhe27yy0ftpee45h07sa092wkrgrjl 2000000000000 23f171f6552680b553707715bead8de807a70255c0b091f7e788bf3b59fe3bea 1 9 Spent
ztron1da9rnkmnzl89kqq87gzh534xmkdhq9cnm0j39lackskrhflfe9d26chnq3adl86es0jm2098hzc 1000000000000 81a06080f2be3f795c506826e066b9bb5327ca234eb31a0ef2446e11339a3935 0 10 Spent
ztron1da9rnkmnzl89kqq87gzh534xmkdhq9cnm0j39lackskrhflfe9d26chnq3adl86es0jm2098hzc 1500000000000 35901973a96369618e5e3f7f4dcede2b5ddb5bc99bf6feac29f2706420ea99c0 0 11 Spent test1
ztron1mm20lkcpj6tx6jfd6ek5fxkgmpk9f2hda6vxdtkwlzr45ez32wa7dt8uka9xwfqamr7zyk7jpzf 500000000000 35901973a96369618e5e3f7f4dcede2b5ddb5bc99bf6feac29f2706420ea99c0 1 12 Spent
ztron1mm20lkcpj6tx6jfd6ek5fxkgmpk9f2hda6vxdtkwlzr45ez32wa7dt8uka9xwfqamr7zyk7jpzf 2500000000000 6ec74435e32261a6dfe10f9498b3ab5a5cfede7c4e31299752b449b9506efc11 0 13 Spent
ztron15t3c27a5ve43ssflqepa8dke36vzvccxrren4ma2lghu3hle8rtwltufnvvzrm76w042s9p5f46 1300000000000 7291b2c58cafb4dede626388f12e846470441f9bb05581221fd742bdd8909a24 0 14 Spent
The Scaling Factor is 1000
No matter you MINT, TRANSFER or BURN, the value must be an integer multiple of 1000
ResetShieldedTRC20Note
Clean all the notes scanned, and rescan all blocks. Generally used when there is a problem with the notes or when switching environments.
ScanShieldedTRC20NoteByIvk
> ScanShieldedTRC20NoteByIvk shieldedTRC20ContractAddress ivk ak nk startNum endNum [event1] [event2] ...
shieldedTRC20ContractAddress
The address of shielded contract
ivk
The ivk of shielded address
ak
The ak of shielded address. Please set this field to null, if you don't care whether the notes are spent or not.
nk
The nk of shielded address. Please set this field to null, if you don't care whether the notes are spent or not.
startNum
The starting block number of the scan
endNum
The end block number of the scan
event1/event2
The events you want to scan. These events must be compatible with standard events, that is, MintNewLeaf(uint256,bytes32,bytes32,bytes32,bytes32[21]), TransferNewLeaf(uint256,bytes32,bytes32,bytes32,bytes32[21]) and BurnNewLeaf(uint256,bytes32,bytes32,bytes32,bytes32[21]). If you ignore this field, the command will scan the standard events. In most cases, you can ignore these parameters.
Scan notes by ivk, ak and nk.
Example:
> ScanShieldedTRC20NoteByIvk TVqa39sqP8ZJNTWjtKrDRifGdVmA4Ycsxu fed8fa4714e6a19511760f9b8ed33388f14c626adff26034f4a21557cb928f01 faf63a2d959df05d4441c0fd42262e0a53629c532e8d29501fe94f9d86c51313 66458c23d737a30146533374d7c5c78f3e05f8f158192e8855493cc55cf8953f 5000 5400
[
{
note: {
value: 100000
payment_address:
ztron12dq4ktrydrxzxrsgpmusp4pe0xawqyz4qfxzsgjdauw99n4n3efnw4kmrptlw8jcrrydx5694mw
rcm: a45878a4e0d53f5cac79370fea1bf4aa82c67d3b2f647ac89c2b1e7061ea740a
memo: without ask 2v1
}
position: 10
is_spent: true
tx_id: 5891fd3a8e860b336b7f7d31f64ec52ec5dc76f81b9bb4e4d0fa8a5756a61dd6
}
]
> ScanShieldedTRC20NoteByIvk TVqa39sqP8ZJNTWjtKrDRifGdVmA4Ycsxu fed8fa4714e6a19511760f9b8ed33388f14c626adff26034f4a21557cb928f01 faf63a2d959df05d4441c0fd42262e0a53629c532e8d29501fe94f9d86c51313 66458c23d737a30146533374d7c5c78f3e05f8f158192e8855493cc55cf8953f 5000 6000 MintNewLeaf(uint256,bytes32,bytes32,bytes32,bytes32[21])
[
{
note: {
value: 100000
payment_address: ztron1z8d5htmt6h26l5agk4ywv86xv3shuv4gjc2rzufyz4s2g5x0035nwrcqmxj4a49n2dy5sq28s5p
rcm: 07604b4a8018d353c08f93044df0fc04ef988c2f65f9222eacc8d41f0e095404
memo: mint
}
position: 16
is_spent: false
tx_id: 38d759216f62503c2b8bf7fc9777e6e25f5f77ec22dd760cc03057c4704277a2
}
]
> ScanShieldedTRC20NoteByIvk TVqa39sqP8ZJNTWjtKrDRifGdVmA4Ycsxu fed8fa4714e6a19511760f9b8ed33388f14c626adff26034f4a21557cb928f01 faf63a2d959df05d4441c0fd42262e0a53629c532e8d29501fe94f9d86c51313 66458c23d737a30146533374d7c5c78f3e05f8f158192e8855493cc55cf8953f 5000 5400 BurnNewLeaf(uint256,bytes32,bytes32,bytes32,bytes32[21])
[
{
note: {
value: 100000
payment_address: ztron12dq4ktrydrxzxrsgpmusp4pe0xawqyz4qfxzsgjdauw99n4n3efnw4kmrptlw8jcrrydx5694mw
rcm: a45878a4e0d53f5cac79370fea1bf4aa82c67d3b2f647ac89c2b1e7061ea740a
memo: without ask 2v1
}
position: 10
is_spent: true
tx_id: 5891fd3a8e860b336b7f7d31f64ec52ec5dc76f81b9bb4e4d0fa8a5756a61dd6
}
]
ScanShieldedTRC20NoteByOvk
> ScanShieldedTRC20NoteByOvk shieldedTRC20ContractAddress ovk startNum endNum [event1] [event2] ...
shieldedTRC20ContractAddress
The address of shielded contract
ovk
the ovk of shielded address
startNum
The starting block number of the scan
endNum
The end block number of the scan
event1/event2
The event you want to scan. These events must be compatible with standard events, that is, MintNewLeaf(uint256,bytes32,bytes32,bytes32,bytes32[21]), TransferNewLeaf(uint256,bytes32,bytes32,bytes32,bytes32[21]), BurnNewLeaf(uint256,bytes32,bytes32,bytes32,bytes32[21]) and TokenBurn(address,uint256,bytes32[3]). If you ignore this field, the command will scan the standard events.
Scan notes by ovk
Example:
> ScanShieldedTRC20NoteByOvk TVqa39sqP8ZJNTWjtKrDRifGdVmA4Ycsxu 4b33fc947a53a5e2a1d1636b323f7f6cecff8c34c9fc511ccc7cfaf0dd6f4c03 5000 6000
[
{
note: {
value: 60000
payment_address: ztron1z8d5htmt6h26l5agk5nlxdlz66fahhcp8vwhyydrwfdajc5yalftew5uhwn6wjz4pwrxu0msu34
rcm: 50698dc3c97fb4d2c818b62de2265a271eb9a58b5dd65074122ddf4d794c6b03
memo: 1
}
tx_id: 19c8aaa244dbcdf30a4b2a02b9b17054dc5d8ebf41d1f82daea044e65dff29d5
}
{
note: {
value: 40000
payment_address: ztron1z8d5htmt6h26l5agk5nlxdlz66fahhcp8vwhyydrwfdajc5yalftew5uhwn6wjz4pwrxu0msu34
rcm: 94afb02c6fd4b19ada89b6b85e2cc23f2fb76c5188ede646c5046b2539a3bf00
memo: 2
}
tx_id: 19c8aaa244dbcdf30a4b2a02b9b17054dc5d8ebf41d1f82daea044e65dff29d5
}
{
transparent_to_address: TV7ceN4tHDNPB47DMStcUFC3Y8QQ7KzN32
transparent_amount: 130000
tx_id: d45da3394be6c15220d31ac17c13e02130aab0c3edf97750620538f4efae366b
}
]
> ScanShieldedTRC20NoteByOvk TVqa39sqP8ZJNTWjtKrDRifGdVmA4Ycsxu 4b33fc947a53a5e2a1d1636b323f7f6cecff8c34c9fc511ccc7cfaf0dd6f4c03 5000 6000 BurnNewLeaf(uint256,bytes32,bytes32,bytes32,bytes32[21]) TokenBurn(address,uint256,bytes32[3])
[
{
note: {
value: 60000
payment_address: ztron1z8d5htmt6h26l5agk5nlxdlz66fahhcp8vwhyydrwfdajc5yalftew5uhwn6wjz4pwrxu0msu34
rcm: 50698dc3c97fb4d2c818b62de2265a271eb9a58b5dd65074122ddf4d794c6b03
memo: 1
}
tx_id: 19c8aaa244dbcdf30a4b2a02b9b17054dc5d8ebf41d1f82daea044e65dff29d5
}
{
note: {
value: 40000
payment_address: ztron1z8d5htmt6h26l5agk5nlxdlz66fahhcp8vwhyydrwfdajc5yalftew5uhwn6wjz4pwrxu0msu34
rcm: 94afb02c6fd4b19ada89b6b85e2cc23f2fb76c5188ede646c5046b2539a3bf00
memo: 2
}
tx_id: 19c8aaa244dbcdf30a4b2a02b9b17054dc5d8ebf41d1f82daea044e65dff29d5
}
{
transparent_to_address: TV7ceN4tHDNPB47DMStcUFC3Y8QQ7KzN32
transparent_amount: 130000
tx_id: d45da3394be6c15220d31ac17c13e02130aab0c3edf97750620538f4efae366b
}
]
BackupShieldedTRC20Wallet
Back up one shielded address.
Example:
> BackupShieldedTRC20Wallet
Please input your password for shieldedTRC20 wallet.
password:
The 1th shieldedTRC20 address is ztron1mf0a0cy86j8rmn4l7dcdsnhyj2k46rem4qxwjqh4z0x26utlddtmmr5fk5dchzt2hpujyvgk69z
The 2th shieldedTRC20 address is ztron1mnkdjl0802dqha9ufh4m80f2ua9cff2hct8geeh77llrz4ywgtu0ct8ygy6k5xavdkd278jyttj
The 3th shieldedTRC20 address is ztron1z8d5htmt6h26l5agk5nlxdlz66fahhcp8vwhyydrwfdajc5yalftew5uhwn6wjz4pwrxu0msu34
Please choose between 1 and 3
1
sk:01ef2d71f8eef668e12db7aef1267c7d6a8f43c84dffa66fc09e2c749464190e
d :da5fd7e087d48e3dcebff3
BackupShieldedTRC20Wallet successful !!!
ImportShieldedTRC20Wallet
Import one shielded address to local wallet.
Example:
> ImportShieldedTRC20Wallet
ShieldedTRC20 wallet does not exist, will build it.
Please input password.
password:
Please input password again.
password:
Please input shieldedTRC20 wallet hex string. such as 'sk d',Max retry time:3
0eb458b309fa544066c40d80ce30a8002756c37d2716315c59a98c893dbb000a 11db4baf6bd5d5afd3a8b5
Import shieldedTRC20 wallet hex string is :
sk:0eb458b309fa544066c40d80ce30a8002756c37d2716315c59a98c893dbb000a
d :11db4baf6bd5d5afd3a8b5
Import new shieldedTRC20 wallet address is: ztron1z8d5htmt6h26l5agk5nlxdlz66fahhcp8vwhyydrwfdajc5yalftew5uhwn6wjz4pwrxu0msu34
ImportShieldedTRC20Wallet successfully !!!
ShowShieldedTRC20AddressInfo
> ShowShieldedTRC20AddressInfo address
Display information about shielded addresses. If this address is not in the wallet, it will only display d
and pkd
Example:
> ListShieldedTRC20Address
ShieldedTRC20Address :
ztron1mf0a0cy86j8rmn4l7dcdsnhyj2k46rem4qxwjqh4z0x26utlddtmmr5fk5dchzt2hpujyvgk69z
ztron1mnkdjl0802dqha9ufh4m80f2ua9cff2hct8geeh77llrz4ywgtu0ct8ygy6k5xavdkd278jyttj
ztron1z8d5htmt6h26l5agk5nlxdlz66fahhcp8vwhyydrwfdajc5yalftew5uhwn6wjz4pwrxu0msu34
> ShowShieldedTRC20AddressInfo ztron1mf0a0cy86j8rmn4l7dcdsnhyj2k46rem4qxwjqh4z0x26utlddtmmr5fk5dchzt2hpujyvgk69z
The following variables are secret information, please don't show to other people!!!
sk :01ef2d71f8eef668e12db7aef1267c7d6a8f43c84dffa66fc09e2c749464190e
ivk:7d2e9c14ff1d82843f39cb69e8bcc228370e4ea8750669bba79e90c485d94c03
ovk:2c3d164fffa63b41a34f495e0c9d8af79d595cfb07db1539545ddcecf046d66e
pkd:70d84ee492ad5d0f3ba80ce902f513ccad717f6b57bd8e89b51b8b896ab87922
d :da5fd7e087d48e3dcebff3
> ShowShieldedTRC20AddressInfo ztron1z8d5htmt6h26l5agk8r7wxw9pyhc0a78hl5thva4k9kcn7fsqvygchyt3n2ncy0r4xv4j5mywnu
pkd:c7e719c5092f87f7c7bfe8bbb3b5b16d89f93003088c5c8b8cd53c11e3a99959
d :11db4baf6bd5d5afd3a8b1
How to use tron-dex to sell asset
MarketSellAsset
Create an order to sell asset
MarketSellAsset owner_address sell_token_id sell_token_quantity buy_token_id buy_token_quantity
ownerAddress
The address of the account that initiated the transaction
sell_token_id, sell_token_quantity
ID and amount of the token want to sell
buy_token_id, buy_token_quantity
ID and amount of the token want to buy
Example:
MarketSellAsset TJCnKsPa7y5okkXvQAidZBzqx3QyQ6sxMW 1000001 200 _ 100
Get the result of the contract execution with the getTransactionInfoById command:
getTransactionInfoById 10040f993cd9452b25bf367f38edadf11176355802baf61f3c49b96b4480d374
{
"id": "10040f993cd9452b25bf367f38edadf11176355802baf61f3c49b96b4480d374",
"blockNumber": 669,
"blockTimeStamp": 1578983493000,
"contractResult": [
""
],
"receipt": {
"net_usage": 264
}
}
GetMarketOrderByAccount
Get the order created by account(just include active status)
GetMarketOrderByAccount ownerAddress
ownerAddress
The address of the account that created market order
Example:
GetMarketOrderByAccount TJCnKsPa7y5okkXvQAidZBzqx3QyQ6sxMW
{
"orders": [
{
"order_id": "fc9c64dfd48ae58952e85f05ecb8ec87f55e19402493bb2df501ae9d2da75db0",
"owner_address": "TJCnKsPa7y5okkXvQAidZBzqx3QyQ6sxMW",
"create_time": 1578983490000,
"sell_token_id": "_",
"sell_token_quantity": 100,
"buy_token_id": "1000001",
"buy_token_quantity": 200,
"sell_token_quantity_remain": 100
}
]
}
GetMarketOrderById
Get the specific order by order_id
GetMarketOrderById orderId
Example:
GetMarketOrderById fc9c64dfd48ae58952e85f05ecb8ec87f55e19402493bb2df501ae9d2da75db0
{
"order_id": "fc9c64dfd48ae58952e85f05ecb8ec87f55e19402493bb2df501ae9d2da75db0",
"owner_address": "TJCnKsPa7y5okkXvQAidZBzqx3QyQ6sxMW",
"create_time": 1578983490000,
"sell_token_id": "_",
"sell_token_quantity": 100,
"buy_token_id": "1000001",
"buy_token_quantity": 200,
}
GetMarketPairList
Get market pair list
Example:
GetMarketPairList
{
"orderPair": [
{
"sell_token_id": "_",
"buy_token_id": "1000001"
}
]
}
GetMarketOrderListByPair
Get order list by pair
GetMarketOrderListByPair sell_token_id buy_token_id
sell_token_id
ID of the token want to sell
buy_token_id
ID of the token want to buy
Example:
GetMarketOrderListByPair _ 1000001
{
"orders": [
{
"order_id": "fc9c64dfd48ae58952e85f05ecb8ec87f55e19402493bb2df501ae9d2da75db0",
"owner_address": "TJCnKsPa7y5okkXvQAidZBzqx3QyQ6sxMW",
"create_time": 1578983490000,
"sell_token_id": "_",
"sell_token_quantity": 100,
"buy_token_id": "1000001",
"buy_token_quantity": 200,
"sell_token_quantity_remain": 100
}
]
}
GetMarketPriceByPair
Get market price by pair
GetMarketPriceByPair sell_token_id buy_token_id
sell_token_id
ID of the token want to sell
buy_token_id
ID of the token want to buy
Example:
GetMarketPriceByPair _ 1000001
{
"sell_token_id": "_",
"buy_token_id": "1000001",
"prices": [
{
"sell_token_quantity": 100,
"buy_token_quantity": 200
}
]
}
MarketCancelOrder
Cancel the order
MarketCancelOrder owner_address order_id
owner_address
the account address who have created the order
order_id
the order id which want to cancel
Example:
MarketCancelOrder TJCnKsPa7y5okkXvQAidZBzqx3QyQ6sxMW fc9c64dfd48ae58952e85f05ecb8ec87f55e19402493bb2df501ae9d2da75db0
Get the result of the contract execution with the getTransactionInfoById command:
getTransactionInfoById b375787a098498623403c755b1399e82910385251b643811936d914c9f37bd27
{
"id": "b375787a098498623403c755b1399e82910385251b643811936d914c9f37bd27",
"blockNumber": 1582,
"blockTimeStamp": 1578986232000,
"contractResult": [
""
],
"receipt": {
"net_usage": 283
}
}