tweakoz / zed64

MetroComputer for an fpga. Retro, modernized.

zed64

MetroComputer for an fpga. Retro, modernized, Verilog.

Not sure where this is going to go. It's on a whim. First thoughts are:

/////////////////////////////////////////////////////////

1. Multicore SMP 6502

   • local ram for fast access
   • Shared mem for communication
   • Bank switching
   • at least 1 core will be connected to the hsync generator, this would allow it to take the place of a copper

2. Modernized VPU inpired by the Vic-II / OCS / SNES

   • Up to 1080p @ 60hz
   • Multiple playfields (with blending)
   • Virtual CharBuffer (for cpu friendly scrolling)

3. Modernized APU - inspired by the sid and various pro synthesizers

   • Digital Modular
   • Wavetable Scanning Oscillators
     • Various A-Rate modulation schemes, AM/RingMod, FM, etc..
     • Loop point modulation
   • Nice filters (SVF)
   • Insert FX - delay/echo, flange, chorus, distortion, etc..
   • Envelopes
   • FUNS (ala Kurzweil VAST)
   • Modulation Matrix
   • Parameter Morphing
   • MIDI ports ?

/////////////////////////////////////////////////////////

Reference FPGA boards: Digilent Nexys4

///////////////////////////////////////////////////////// // Building /////////////////////////////////////////////////////////

1. ./make.py prep downloads dependencies, makes build folders, generates verilog
2. ./make.py synver re-generates verilog
3. ./make.py synvhd re-generates VHDL (not working yet... ;<)
4. ./make.py ise launches ise with zed64 project
5. ./make.py sim iverilog simulate (generates a png bitmap via iverilogs VPI interface)
6. ./make.py simv iverilog simulate (generates a vcd wave file)
7. ..make.py cc65test simulate cpu (WIP) eventually will be fleshed out to a whole system simulator

After the first time you run make prep, a zed.build.ini file will be generated. Edit this to reflect your environment.