tuupola / micropython-mpu9250

MicroPython I2C driver for MPU9250 9-axis motion tracking device

tuupola/micropython-mpu9250 Issues

TypeError: 'id' argument required
Closed 3 months ago7
Error on initializing MPU9250 I2C
Closed 6 months ago5
Using the library for Microbit
Closed 6 months ago2
Can not use AK8963
Updated 6 months ago1
gy91 mpu9255 and new ak8963
Updated a year ago8
AK8963 - [Errno 5] EIO
Closed 2 years ago3
OSError: [Errno 5] EIO
Closed 2 years ago3
[Errno 19] ENODEV
Closed 4 years ago14
MPU-9250 AK893 is not detected
Closed 3 years ago2
Add accelerometer calibration
Updated 3 years ago
MPU6500 class fails to initialize when used from MPU9250 class
Closed 4 years ago3
RuntimeError: MPU6500 not found in I2C bus.
Closed 4 years ago9
ImportError : cannot load module i2C
Closed 5 years ago3
Add support for low pass filters
Closed 5 years ago1
Strange data from the gyroscope of mpu9250
Closed 5 years ago1
Add gyro calibration
Closed 5 years ago
Add support for onchip temperature
Closed 5 years ago2
Add magnetometer calibration
Closed 6 years ago
Support AK8963 sensitivity adjustment values (ASAX, ASAY, ASAZ)
Closed 6 years ago