tube0013 / tube_gateways

Information and Documentation on Tube's Zigbee Gateways

tube0013/tube_gateways Issues

2023 POE coordinator not working after changing firmware?
Closed 6 months ago9
2021 Round PoE coordinator stops and unresponsive.
Updated 6 months ago5
tubeszb-cc2652-poe-2023 errors/crashing
Closed 6 months ago7
Watchdog heartbeat timeout: EzspError('EZSP is not running') EF32 MGM1 ZHA Error
Closed 6 months ago7
EFR32 MGM21 stops responding
Updated 6 months ago17
Failed to read from client 192.168.10.153 with error 128!
Closed 7 months ago18
z2m failures
Updated 6 months ago38
Older Tubeszb-CC2652p2-poe-v2: Serial pin out
Closed 7 months ago8
tubeszb-cc2652-poe-2023 problem ( crashing? )
Updated 7 months ago49
[REQUEST] MGM240P (e.i. Silicon Labs EFR32MG24) based Zigbee Coordinator and Zigbee Router adapters
Updated 7 months ago2
Question: SMA-RP Splitter going to External Antennas
Updated 7 months ago14
SSH Account
Updated 7 months ago2
Zigbee2MQTT doesn't work after upgrading tubezb-cc2652p2-eth coordinator to CC1352P2_CC2652P_launchpad_coordinator_20230507
Updated 7 months ago2
Ckicking ESPHome or the firmware link does nothing
Closed 8 months ago3
Error During ZHA Setup with EFR32-MGM210-POE
Closed 8 months ago9
tubeszb-cc2652-poe-2022 Crashing
Updated 8 months ago16
CC2652P2 PoE Coordinator Error Lights
Closed 8 months ago4
Error in log while attempting to connect to API
Closed 8 months ago3
Unable to update firmware on EFR32 MGM21 Ethernet/USB
Updated 8 months ago7
Home Assistant zha Unable to connect to Tubeszb-Efr32-Mgm210-Poe-2023
Closed 8 months ago2
Unable to create ZHA Network with EFR32-MGM210-POE-2023 with HA 2023.10.X
Closed 8 months ago15
ESPHome 2023.09 update issue
Updated 9 months ago1
Firmware update question
Closed 10 months ago4
Update firmware to match koenkk 20221102
Updated 10 months ago3
[SUGGESTION] ESP32-C6 (or ESP32-H2) to Ethernet gateway/bridge hardware product?
Updated a year ago
Not able to connect tubeszb-cc2652-poe-2022 to iobroker
Closed a year ago37
password ?
Updated a year ago6
[CC2652P2 ETH/USB] Error : Failed to connect to the adapter
Closed a year ago2
Unable to configure Zigbee to PoE Coordinator in Home Assistant
Closed 2 years ago22
Firmware update doesn't work for tube-zb-gw-cc2652p2-v2
Closed a year ago4
coordinator not responding to zigbee2mqtt?
Updated a year ago3
Update TubesZB CC2652 PoE Coordiniator OTA Network Upgrade Procedure
Closed a year ago8
Gateway ethernet fails to connect when powering on while network is not yet available
Updated a year ago
Tubes Coordinator (POE) version failing upgrade to the December firmware update.
Updated a year ago12
Sengeld Bulbs with cc2652 routers
Updated a year ago6
> Have had this happen a couple of times, but the coordinator just stops working (becomes inaccessible via ip address). Not sure if these logs from Z2M are helpful but including:
Closed a year ago
coordinator crashing?
Closed a year ago46
Routers offline after initial join
Updated a year ago25
update CC2652 flashing docs for new firmware
Closed a year ago
Firmware update cadence?
Closed a year ago2
How to turn on "Prep for firmware update mode"
Closed a year ago2
LEDs on CC2652P2 PoE
Closed a year ago2
Failed firmware update
Closed a year ago1
it's possible to flash TubesZB CC2652 Ethernet/USB Coordiniator with router firmware ?
Closed 2 years ago11
Can not pair aqara devices to efr32 POE
Closed 2 years ago21
Power issue
Closed 2 years ago3
coordinator losing signal if I move it to the next room
Updated 2 years ago12
ESP 32 Flash on tubeszb-cc2652-eth_usb + WT32-ETH01 flashing problem...
Closed 2 years ago12
cordinator stopped working on HA, cannot flash CC2652
Updated 2 years ago5
Loosing connection
Closed 2 years ago4