DISK NUKEM DRIVE WIPING SCRIPTS
TUXNUKEM
These two scripts automate the secure erase of hard drives to varying degrees from a Parted Magic live USB or CD. One is interactive - tuxnukem.sh, and one full automated - tuxnukem-auto.sh.
Quick Overview
- Shutdown computer
- Boot from Parted Magic USB
- If interactive - answer yes or no to questions. q to quit.
- If non-interactive - do nothing but wait for script to complete and the device to shut itself down.
DO NOT POWER OFF THE DEVICE WHILST THE SSD ERASE IS TAKING PLACE AS THIS CAN LEAVE THE SSD IN AN USUABLE STATE OR EVEN HARD BRICK IT.
How to setup Parted Magic USB
- Purchase & download Parted Magic.
- Windows: Write the iso to a usb using Unetbootin, Etcher, Rufus or Yumi.
- macOS: Write the iso to a usb using Unetbootin, Etcher or the dd command.
dd if=/path/to/pmagic.iso of=/dev/disk${disk_number} bs=4m; sync - Mount the USB drive and copy either tuxnukem.sh or tuxnukem-auto.sh to pmagic/pmodules/scripts
Detailed Explanation
The script finds any internal disks in the machine by probing the TRAN (transfer type) field of lsblk’s output parameter and looking for SATA interfaces. That way we don’t pick up the USB drive itself.
We interate over each SATA devices (so the script scales to multi-drive machines) and ask or automate (depending on script used) the following tasks:
- Wipe thepartition table with sgdisk –zap-all. This command looks for any gpt or mbr partition tables and destroys any of these data structures.
- Use dd to zero out the first and last MB of the drive. I do this just to be doubley sure any partition table structures have been nuked from orbit!
- Use dcfldd (an extended dd) to write random data (using the /dev/urandom device file) to the first 2GB of the drive.
- The interactive script provides the option to wipe the whole drive in this manner if you’re feeling particularly paranoid.
- It’s recommended that this is done multiple times to make a the data on a traditional spinning hard drive truly unrecoverable, however, this is probably impractical (likely to take multiple hours) and overkill for our usage.
- Whilst a multiple pass wipe is not implimented at the moment it would be trivial to add it as an option to the interactive script
- Detect an SSD using the kernel’s block info at /sys/block/disk/queue/rotational
- If we find an SSD, check it’s hdparm status. Many BIOSes will protect your drives if you have a password set (security enabled) by issuing a SECURITY FREEZE command before booting an operating system.
- The only way to unfreeze the drive is either to hotplug it or suspend the machine. I opted for the latter, since it’s fairly tricky to hotplug a drive with a bash script!
- Once we’ve unfrozen the drive, use hdparm to clear it’s memory cells by setting and clearing a password to reset the encryption key and effectively reset all the cells to their factory state.
- Their are two types of memory cell clearing - secure and enhanced. The difference between the two being that enhanced wipes the reserved blocks too, but it’s not always supported with every ssd model.
- Therefore I check for support and only run it if it’s supported. It’s worth noting that the enhanced erase tends to take a fair bit longer.
- Before running the command I parse the output of hdparm’s informational argument to get a time estimate.
IT’S INCREDIBLY IMPORTANT THAT THE MACHINE IS NOT POWERED OFF OR THE HDPARM PROCESS TERMINATED OR YOU RISK BRICKING THE DRIVE.
References:
https://ata.wiki.kernel.org/index.php/ATA_Secure_Erase
https://www.kingston.com/en/community/articledetail/articleid/10
https://superuser.com/questions/1102184/how-can-i-securely-wipe-an-ssd/1102853
MACNUKEM
These macOS wiping script were written to get around the limitation of Deploy Studio not being able to image to APFS formatted disks or disks with FileVault enabled.