travisdieckmann / curve_optimizer_util

Linux command-line utility for tuning and testing AMD Curve Optimizer

AMD Curve Optimizer Utility

Credits

This project was inspired by these fine projects from-which much of the code you'll find here has been derived:

• https://github.com/fhoekstra/thread_switcher
• https://github.com/chestm007/python-mprime

Disclaimer

USE AT YOUR OWN RISK! The use of this project or utility should not cause harm to your computer or any component(s). However, the project author nor the project maintainers make any guarantees against such harm and therefor cannot and will not be held liable for any damages. This project should not be considered conclusive evidince to the stability of any particular system tuning or configuration.

Installation

Easy Install

Installation is streamlined by the use of the install.sh script which you can execute simply:

sh -c "$(curl -fsSL https://raw.githubusercontent.com/travisdieckmann/curve_optimizer_util/main/tools/install.sh)"

Manual Install

Install mprime:

mkdir -p ~/.local/share/mprime
cd ~/.local/share/mprime
curl http://www.mersenne.org/ftp_root/gimps/p95v303b6.linux64.tar.gz -o p95v303b6.linux64.tar.gz
tar -xzf p95v303b6.linux64.tar.gz
cd ~/.local/bin
ln -s ../share/mprime/mprime mprime
cd ${start_dir}

Install python-mprime:

pip install -q git+https://github.com/travisdieckmann/python-mprime.git@0366b1ef0910cb135705a3cffd01459ae2b85711

Install curve_optimizer_util:

pip install -q git+https://github.com/travisdieckmann/curve_optimizer_util.git

Usage

Start AMD Curve Optimizer Utility on your command prompt:

curve-optimizer-util

Contributing

Feel free to fork and open a pull-request back to this project!