This is an exercise apps for Elixir Embedded using Nerves Project. My hardware is Raspberry Pi Zero and Pimoroni Enviro PHAT (https://shop.pimoroni.com/products/enviro-phat). Build using Nerves 1.6, Elixir ALE 1.2 , and Elixir 1.10.3.
Guideline for this app is based on Elixir Conf 2017 by Frank Hunleth.
Later on, i'll try to continue to be able accessing on all sensors within Envirophat, and perhaps make an IoT based environment data gatherer for my home.
Nerves applications produce images for hardware targets based on the
MIX_TARGET
environment variable. If MIX_TARGET
is unset, mix
builds an
image that runs on the host (e.g., your laptop). This is useful for executing
logic tests, running utilities, and debugging. Other targets are represented by
a short name like rpi3
that maps to a Nerves system image for that platform.
All of this logic is in the generated mix.exs
and may be customized. For more
information about targets see:
https://hexdocs.pm/nerves/targets.html#content
To start your Nerves app:
export MIX_TARGET=my_target
or prefix every command withMIX_TARGET=my_target
. For example,MIX_TARGET=rpi3
- Install dependencies with
mix deps.get
- Create firmware with
mix firmware
- Burn to an SD card with
mix firmware.burn
- Official docs: https://hexdocs.pm/nerves/getting-started.html
- Official website: https://nerves-project.org/
- Forum: https://elixirforum.com/c/nerves-forum
- Discussion Slack elixir-lang #nerves (Invite)
- Source: https://github.com/nerves-project/nerves