Ghost Busters Wifi Scanner
Yep this is exactly what it sounds like - I've created a Wifi Scanner using a Raspberry Pi Pico W, a small Pimoroni Display for Pico, all within a Ghostbusters PKE meter hand-held 3d printed holder.
YouTube Video
Click the thumbnail below to watch the show all about this build.
The two arms will raise or lower dependent on the Signal strength of the wifi
3D Printable files
You can download the STLs for 3d printing here::
Electronics
You will also need the following electornics:
- Raspberry Pi Pico W
- Pimoroni Display Pack for Pico
- DS-959MG Servo
- Amigo Pro LiPo battery charger
- Galleon Battery
- Micro USB Cable to program the Pico W
- Pico Proto board
Other bits
- 4x 2M 8mm screws
- 4x 2M 12mm screws
- 1x 2.5M screw and nut