tjko / CCLoader

Burn BLE Mini (CC2540) firmware using Blend Micro board.

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

CCLoader

Note!
This is fork of the original https://github.com/RedBearLab/CCLoader that adds functionality to also read flash (and to check chip ID/revision). Pull request (RedBearLab#27) for these changes has been submitted, so you may be better off using the original version as this version likely won't be regularly updated (if these changes end up in the mainline).
Help needed, only Linux executable has been updated with new functionality Windows and MacOSX versions need these changes merged to them before they work against the new updated Arduino sketch.

Burn CC254x firmware using an Arduino board.

  1. Load the CCLoader Arduino sketch to the UNO board.
  2. Wire the pins: image
  3. Use CCLoader.exe to load the Demo.bin to the UNO board and the board will burn the firmware to the BLE Mini.

New functionalty

  • ccloader executable now has three commands/modes:
    • id - Read chip ID/Revision
    • read - read/dump flash memory (save/backup flash memory before overwriting it, if flash is not protected)
    • write - write flash memory

Note! Currently only Linux executables is updated with the new functionality. Windows and MacOSX executables will need to be updated with changes made to Linux executable before those can be used...

Syntax

Usage: ./ccloader_tng <serialport> <device> <command> [<bin file> [<verify> | <read_start_block> <read_blocks>]]
Examples:
Read Chip ID: ./ccloader_tng /dev/ttyUSB0 1 id
 Write Flash: ./ccloader_tng /dev/ttyUSB0 1 write flash.bin 1
  Read Flash: ./ccloader_tng /dev/ttyUSB0 1 read dump.bin 0 512
Example: ./ccloader_tng /dev/ttyUSB0 1 id
          <device>: 0 -- Default (e.g. UNO)
                    1 -- Leonardo/Mini Pro/etc...
          <verify>: 0 -- No verify (default)
                    1 -- Verify (when flashing)
 <read_stat_block>: 0 -- Start flash dump from block (0 = beginning of the flash)
     <read_blocks>: 512 -- How many blocks to read (512 = 256Kb)

Query chip ID

# ./ccloader_tng /dev/ttyACM0 1 id
Serial port: /dev/ttyACM0
Device: Leonardo
Baud:115200 data:8 parity:none stopbit:1 DTR:on RTS:off

Send command: id
Waiting for response...

      Chip ID: 0x41 (CC2541)
Chip Revision: 0x13


Closing serial port

Write flash image to chip

# ./ccloader_tng /dev/ttyACM0 1 write ../../Bin/Demo.bin 1
Verify enabled (flashing process will take longer)
Serial port: /dev/ttyACM0
Device: Leonardo
Baud:115200 data:8 parity:none stopbit:1 DTR:on RTS:off
Image file: ../../Bin/Demo.bin
Total blocks: 512 (262144 bytes)

Send command: write
Waiting for response...

      Chip ID: 0x41 (CC2541)
Chip Revision: 0x13

Begin programming...
1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28  29  30  31  32  33  34  35  36  37  38  39  40  41  42  43  44  45  46  47  48  49  50  51  52  53  54  55  56  57  58  59  60  61  62  63  64  65  66  67  68  69  70  71  72  73  74  75  76  77  78  79  80  81  82  83  84  85  86  87  88  89  90  91  92  93  94  95  96  97  98  99  100  101  102  103  104  105  106  107  108  109  110  111  112  113  114  115  116  117  118  119  120  121  122  123  124  125  126  127  128  129  130  131  132  133  134  135  136  137  138  139  140  141  142  143  144  145  146  147  148  149  150  151  152  153  154  155  156  157  158  159  160  161  162  163  164  165  166  167  168  169  170  171  172  173  174  175  176  177  178  179  180  181  182  183  184  185  186  187  188  189  190  191  192  193  194  195  196  197  198  199  200  201  202  203  204  205  206  207  208  209  210  211  212  213  214  215  216  217  218  219  220  221  222  223  224  225  226  227  228  229  230  231  232  233  234  235  236  237  238  239  240  241  242  243  244  245  246  247  248  249  250  251  252  253  254  255  256  257  258  259  260  261  262  263  264  265  266  267  268  269  270  271  272  273  274  275  276  277  278  279  280  281  282  283  284  285  286  287  288  289  290  291  292  293  294  295  296  297  298  299  300  301  302  303  304  305  306  307  308  309  310  311  312  313  314  315  316  317  318  319  320  321  322  323  324  325  326  327  328  329  330  331  332  333  334  335  336  337  338  339  340  341  342  343  344  345  346  347  348  349  350  351  352  353  354  355  356  357  358  359  360  361  362  363  364  365  366  367  368  369  370  371  372  373  374  375  376  377  378  379  ^[OR380  381  382  383  384  385  386  387  388  389  390  391  392  393  394  395  396  397  398  399  400  401  402  403  404  405  406  407  408  409  410  411  412  413  414  415  416  417  418  419  420  421  422  423  424  425  426  427  428  429  430  431  432  433  434  435  436  437  438  439  440  441  442  443  444  445  446  447  448  449  450  451  452  453  454  455  456  457  458  459  460  461  462  463  464  465  466  467  468  469  470  471  472  473  474  475  476  477  478  479  480  481  482  483  484  485  486  487  488  489  490  491  492  493  494  495  496  497  498  499  500  501  502  503  504  505  506  507  508  509  510  511  512  
End programming

Closing serial port

Read flash image from chip

# ./ccloader_tng /dev/ttyACM0 1 read flashdump.bin 0 512 
Serial port: /dev/ttyACM0
Device: Leonardo
Baud:115200 data:8 parity:none stopbit:1 DTR:on RTS:off
Image file: flashdump.bin
Total blocks: 512 (262144 bytes)

Send command: read
Waiting for response...

      Chip ID: 0x41 (CC2541)
Chip Revision: 0x13

Reading flash... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512
Flash Dump Complete

Closing serial port

About

Burn BLE Mini (CC2540) firmware using Blend Micro board.


Languages

Language:C 60.8%Language:C++ 39.0%Language:Makefile 0.2%