To download the most recent project without installing GIT, please press the green "Clone or Download" button and select "Download ZIP".
This application uses a web interface to allow the user to interact with two different types of sensors, Tibbo Cable Probe Sensors and Tibbo Tibbits. The following sensors are available:
- BP#01 or Tibbit 29 - Ambient Temperature Sensor
- BP#02 or Tibbit 30 - Ambient Temperature & Humidity Sensor
- BP#03 or Tibbit 28 - Ambient Light Sensor
- Tibbit 36 - 3-Axis Accelerometer
- Tibbit 35 - Barometric Pressure Sensor
In order to access the web interface, we must first know the IP address which has been assigned to the device. After loading the application to the device, open Device Explorer and take note of the IP address displayed next to the application. Then, navigate to that IP address using a web browser of your choosing.
If a sensor is connected, the following will be displayed:
- The sensor ID
- The sensor type
- The sensor reading
If no sensor is connected, a prompt to connect a sensor will be displayed.
Sensors can be connected and disconnected while the application is still running.