A pimatic plugin to make snmp get request. The Oid can be found in the device mib file provided by the manufacture or using Oidview.
{ "plugin": "snmp" }
The plugin has the following configuration properties:
| Property | Default | Type | Description |
|---|---|---|---|
| debug | false | Boolean | Debug mode. Writes debug messages to the pimatic log, if set to true |
The plugin supports auto discover of snmp devices on your connected networks.
As default the community "public" and the oid '.1.3.6.1.2.1.1.5.0' for sysname property are used.
The oids must be provied using this format: .x.xx.x.x.x.xxx - for example: .1.2.840.10006.300.43.1.3.0
The following device can also be created manually:
The SnmpSensor displays the output of your specified command to the gui.
{ "id": "snmp1", "class": "SnmpSensor", "name": "Snmp Sensor", "host": "", "oids": [ { "label": "SysName", "oid": ".1.3.6.1.2.1.1.5.0" } ] }
| Property | Default | Type | Description |
|---|---|---|---|
| host | - | String | Hostname or IP address of target device |
| port | 161 | Number | Port used by snmp |
| oids | - | Array | An array of oid objects.See device configuration schema for details |
| community | "public" | String | snmp community for read and/or write access |
| interval | 60000 | Number | The time interval in milliseconds at which the oid is queried |
| attributes | - | Object | Attributes are automatical saved to config for later support for rules |
If you already created a SnmpSensor device and you change the oids later, all attributes from this device need to be deleted manually, before the new attributes are shown.
The SnmpSensor displays the output of your specified command to the gui.
{ "id": "snmp2", "class": "SnmpPresenceSensor", "name": "Snmp Presence Sensor", "host": "", "oids": [ { "label": "State", "oid": ".1.3.6.1.2.1.1.5.0" } ] }
| Property | Default | Type | Description |
|---|---|---|---|
| host | - | String | Hostname or IP address of target device |
| port | 161 | Number | Port used by snmp |
| oids | - | Array | An array of oid objects. Only one object is supported! |
| community | "public" | String | snmp community for read and/or write access |
| interval | 60000 | Number | The time interval in milliseconds at which the oid is queried |
Only one oid object is supported at the moment!
- Add automatic clearing of attributes if oids were changed
- Add set funtion for rule usage
- Add support for multiple presence sensors in one device
See Release History.
Copyright (c) thost96 and contributors. All rights reserved.
License: GPL-2.0.