Giters

thisiskeithb / Marlin

Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.

Home Page:http://www.marlinfw.org/

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

repraparduino3d-printingfirmwareavratmelstmicroesp32stm32

MarlinFirmware's logo

Prusa MK3S Marlin Firmware
BTT002 V1 / Multi-TMC / BMG

GPL-V3.0 License Contributors Last Commit Date CI Status GitHub Sponsors
Follow thisiskeithb on Twitter

Specs

This firmware is configured for a heavily modified Prusa MK3S Bear 2.1 with the following upgrades:

Frame

Motherboard

Drivers

Hotend

Build Plates

LCD

Other

Credits

First layer calibration based on Prusa's MK3/S/+ "meander" first layer calibration

About

Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.

http://www.marlinfw.org/

repraparduino3d-printingfirmwareavratmelstmicroesp32stm32

License:GNU General Public License v3.0

Languages

Language:C++ 79.5%Language:C 19.0%Language:Python 0.7%Language:Shell 0.4%Language:JavaScript 0.2%Language:Makefile 0.1%Language:HTML 0.1%Language:Assembly 0.0%Language:CMake 0.0%Language:OpenSCAD 0.0%Language:CSS 0.0%Language:Roff 0.0%Language:G-code 0.0%Language:Dockerfile 0.0%Language:GDB 0.0%Language:NASL 0.0%Language:BitBake 0.0%