esp8266_zb40_mqtt_gateway
Gateway for connecting GW60 superrollo shutters with ZB40 remote control unit with MQTT
For this to work you need to disable a remote and connect the ESP to the HCS361 KeeLoq chip (some soldering skills required) This will definitely void your warranty, do it at your own risk!
Connections:
| GPIO(arduino) | nodeMcu | HCS631 |
|---|---|---|
| 16 | D0 | 1(S0) |
| 5 | D1 | 2(S1) |
| 4 | D2 | 3(S2) |
| 15 | D8 | 4(S3) |
The ESP will come up in AP mode for configuration with SSID ZB40_Gateway encryption is enabled. (Password: roottoor)
Default topic is /ZB40_GATEWAY. You can controll it via MQTT with the following topics.
| Topic | Payload (only one at a time) |
|---|---|
| /ZB40_GATEWAY/ALL/ | up, down, stop |
| /ZB40_GATEWAY/1/ | up, down, stop |
| /ZB40_GATEWAY/2/ | up, down, stop |
| /ZB40_GATEWAY/3/ | up, down, stop |
Based on example code: https://github.com/tzapu/WiFiManager for config https://github.com/knolleary/pubsubclient/ for mqtt
Thanks to the reasearch here: https://forum.fhem.de/index.php?topic=17125.0