Lennox iComfort WiFi Component

A custom component for Home Assistant to integrate with Lennox iComfort WiFi thermostats and AirEase Comfort Sync thermostats.

Please Note: This component does not support the Lennox iComfort S30 or Lennox iComfort E30 thermostats. For those thermostats please check out PeteRager's repository.

Requirements

Home Assistant >= 2022.12
Thermostat linked to a myicomfort.com (Lennox) or mycomfortsync.com (AirEase) account

Installation

This integration is available in HACS for ease of installation.
If you wish to manually install this component, copy the 'myicomfort' folder and contents to <HA config directory>/custom_components/

Configuration

Example configuation

climate:
  - platform: myicomfort
    name: firstfloor
    username: !secret cloudapi_username
    password: !secret cloudapi_password
    system: 0
    zone: 0
    min_temp: 55
    max_temp: 90
    cloud_svc: airease

Platform Parameters

Name	Type	Requirement	Default	Description
name	string	required	none	Entity name
username	string	required	none	Cloud service account username
password	string	required	none	Cloud service account password
system	integer	optional	`0`	Select the system for integration if you have multiple on the account.
zone	integer	optional	`0`	Select the zone for integration if the selected system has multiple zones.
min_temp	integer	optional	`45`	Minimum temperature HA can set.
max_temp	integer	optional	`95`	Maximum temperature HA can set.
cloud_svc	string	optional	`lennox`	Cloud service selection - use `lennox` or `airease`

Multiple zones or systems

Add additional entries under climate for each additional system or zone.

climate:
  - platform: myicomfort
    name: Downstairs
    username: !secret cloudapi_username
    password: !secret cloudapi_password
    system: 0 
    zone: 0 
    min_temp: 55
    max_temp: 90
    cloud_svc: lennox
  - platform: myicomfort
    name: ManCave
    username: !secret cloudapi_username
    password: !secret cloudapi_password
    system: 0 
    zone: 1 
    min_temp: 45
    max_temp: 75
    cloud_svc: lennox
  - platform: myicomfort
    name: Upstairs
    username: !secret cloudapi_username
    password: !secret cloudapi_password
    system: 1 
    zone: 0 
    min_temp: 65
    max_temp: 80
    cloud_svc: airease

Notes

Humidity

The humidity is exposed to HA as an attribute of the climate entity but since the device doesn't support set_humdity, most of the thermostat cards won't display it. The template platform can be used to capture the humidity and make it accessible as a sensor. You can use the Simple Thermostat card to add the sensor to a thermostat card.

Below is a an example to expose the current humidity as a sensor. The climate device is named 'lennox' and the resulting sensor is 'lennox_humidity'.

template:
  - sensor:
    - name: lennox_humidity
      unit_of_measurement: '%'
      state: '{{ states.climate.lennox.attributes.current_humidity | float }}'

HA 0.96 to 2021.4

There were minor changes to the climate platform between 0.96 and 2021.4. You can read thru release notes in this repository to find a version that works for you.

HA 0.95 or older

If for some reason you are still running HA 0.95 or older, you can still integrate with your thermostat. You just need to grab one of the older code sets from here: https://github.com/thevoltagesource/LennoxiComfort-archive

Credits

My code is built on the work of Jerome Avondo (ut666)

API: https://github.com/ut666/LennoxPy
HA Component: https://github.com/ut666/Homeassistant/tree/master/custom_components/climate
Lennox Cloud API details: https://github.com/ut666/LennoxThermoPi-II

thevoltagesource / LennoxiComfort