Show hardware information of the Linux machine whether virtual or not
To use it just run the info.sh script
Make sure the info.sh file is runable, if not use
chmod u+x info.sh
---------------------------
-----INFO-OS---------------
---------------------------
Linux STVLIFABORCHE01 2.6.32-573.12.1.el6.x86_64 #1 SMP Tue Dec 15 21:19:08 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
LSB Version: :base-4.0-amd64:base-4.0-noarch:core-4.0-amd64:core-4.0-noarch:graphics-4.0-amd64:graphics-4.0-noarch:printing-4.0-amd64:printing-4.0-noarch
Distributor ID: CentOS
Description: CentOS release 6.7 (Final)
Release: 6.7
Codename: Final
---------------------------
-----INFO-CPU--------------
---------------------------
model name : Intel(R) Xeon(R) CPU E5-2670 0 @ 2.60GHz
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 8
On-line CPU(s) list: 0-7
Thread(s) per core: 1
Core(s) per socket: 8
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 45
Stepping: 7
CPU MHz: 2593.499
BogoMIPS: 5186.99
Hypervisor vendor: VMware
Virtualization type: full
L1d cache: 32K
L1i cache: 32K
L2 cache: 256K
L3 cache: 20480K
NUMA node0 CPU(s): 0-7
---------------------------
-----INFO-RAM--------------
---------------------------
MemTotal: 32.8798 GB
---------------------------
-----INFO-GPU--------------
---------------------------
No GPU informations find
---------------------------
-----INFO-NETWORK----------
---------------------------
03:00.0 Ethernet controller: VMware VMXNET3 Ethernet Controller (rev 01)
0b:00.0 Ethernet controller: VMware VMXNET3 Ethernet Controller (rev 01)
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
inet xxx.xxx.xxx.xxx/xxx Bcast:xxx.xxx.xxx.xxx scope global eth0
inet6 xxxx::xxxx::xxxx:xxxx scope link
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
inet xxx.xxx.xxx.xxx/xxx Bcast:xxx.xxx.xxx.xxx scope global eth0
inet6 xxxx::xxxx::xxxx:xxxx scope link
valid_lft forever preferred_lft forever
---------------------------
-----INFO-DISK-------------
---------------------------
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 50G 11G 37G 23% /
tmpfs 16G 0 16G 0% /dev/shm
/dev/sda1 200M 264K 200M 1% /boot/efi
/dev/sdb1 99G 46G 49G 49% /opt
- **Théo Grébeude ** - github
This project is licensed under the MIT License - see the LICENSE.md file for details