thedevleon / embassy-on-esp

Embassy on ESP

with no_std, async, embassy, leds and more!

Hardware

ESP32-C6-DevKitM-1 (for now, until a proper C6 devboard comes around... or maybe I should just make one?)

Setup

1. Install Rust >=1.75 via rustup (https://rustup.rs/)
2. rustup target add riscv32imac-unknown-none-elf

How to run?

Attach the ESP32 via the USB port that is hooked up to the ESP directly (not the UART port), and run cargo run.

On initial flash you'll need to put the ESP into bootloader mode by holding the GPIO 9 button and resseting the ESP (via the EN/reset button).