theb4rt / pizomniatool

PiZ0mn1aTool is a compact and powerful hacking tool, crafted around the Raspberry Pi Zero 2W, paired with a Display Gaming LCD Hat.

PiZ0mn1aTool

PiZ0mn1aTool is a compact and powerful hacking tool, crafted around the Raspberry Pi Zero 2W, paired with a Display Gaming LCD Hat.

Requirements

• Raspberry Pi Zero 2W
• Display Gaming LCD Hat 1.44"
• Micro SD Card min. 16GB
• Power Supply (5V 2.5A)
• (Optional) USB WiFi Dongle: With monitor mode support, only needed for specific WiFi attacks such as deauth, etc. The internal WiFi card will work for most of the attacks.

Installation

• Download the latest Raspberry Pi OS Lite image from here
• Change resolution of displayed console by editing the file /etc/default/console-setup and setting:

# CONFIGURATION FILE FOR SETUPCON

ACTIVE_CONSOLES="/dev/tty[1-6]"
CHARMAP="UTF-8"
CODESET="guess"
FONTFACE="TerminusBold"
FONTSIZE="16x32"

VIDEOMODE=

• Install the LCD Hat 1.44" driver.
• Add these lines to your .bashrc file:

if [ "$(tty)" = "/dev/tty1" ]; then       
    sleep 2
    clear
    python3 {full_path_to/}PiZ0mn1aTool.py
fi

• Enable autologin to your user by editing these files:

  • /etc/systemd/system/getty@.service, in the [Service] section:

    ExecStart=-/sbin/agetty -J -i -N --nohostname -a {HERE YOUR USER} %I $TERM

  • /etc/systemd/system/[e-mail].d/autologin.conf:

    [Service]
    ExecStart=
    ExecStart=-/sbin/agetty --autologin {HERE YOUR USER} --noclear %I $TERM

• Edit sudoers file to allow your user to run sudo without password:

{HERE YOUR USER}  raspberrypi= (root) NOPASSWD: /usr/bin/nmap

• Edit the file /etc/wpa_supplicant/wpa_supplicant.conf and add your WiFi network, remember to set the priority field.

ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1

network={
	ssid="YOUR_SSID"
	psk="YOUR_PASSWORD"
	priority=1
}

network={
    ssid="ANOTHER_SSID"
    psk="ANOTHER_PASSWORD"
    priority=2
}

Images

Authors

• @theb4rt

License

GPLv3