This module uses the UX proposed for the final implementation of Hugo building Pages from Data while relying on a workaround to achieve the same result.
This workaround uses a second hugo project to build markdown files which are then mounted into the content directory of the main hugo project.
The module will read any _content.{json|toml|yaml|hugo} file in the main project's content directory to generate mardkown files in the prebuild project matching the structure. See Usage
Requirements:
- Go 1.14
- Hugo 0.103.0
IMPORTANT! This module should be used on the "prebuild" hugo project, and not the main project.
For this documentation, we'll assume your prebuild project lives under the _prebuild directory.
Add a _prebuild/config.yaml to your main Hugo project.
2. init your prebuild project as Hugo Module.
Move down to the _prebuild directory and:
$: hugo mod init {repo_url}/_prebuild
Where {repo_url} is your main project's repo url ex: hugo mod init github.com/mememe/my-website/_prebuild
# _prebuild/config.yaml
module:
imports:
- path: github.com/theNewDynamic/hugo-module-tnd-dataIn order for the module from the prebuild project to surface your main project's content's "data" files, you need to setup the following mounts config on the prebuild project:
# _prebuild/config.yaml
module:
imports:
- path: github.com/theNewDynamic/hugo-module-tnd-data
mounts:
- source: ../content
target: assets
# Optional: If you want to use dynamically generated data with a `_content.hugo` file,
# you'll also need to mount the content dir in this project's partials (but not the md files).
- source: ../content
target: layouts/partials
excludeFiles:
- "**.md"
# Finally, if your `_content.hugo` files rely on some of the main project's partial,
# you'll need this final mount settings.
- source: ../layouts/partials
target: layouts/partialsNow we need to ensure the main project will be using the markdown files generated by the prebuild project:
# /config.yaml
module:
mounts:
- source: _prebuild/public
target: contentIf used in a multilingual project relying on directories, be aware of the lang key as illustrated here.
Yes, your prebuild project does not need any layouts files on its own, it'll be using the module's.
Each section or the root of your main project's content directory can use it's own _content file. A data file can either be json, toml, yaml or hugo/html. This could be the content directory of your project:
content
├── _content.yaml
├── blog
│ ├── _content.json
│ └── an-extra-local-post.md
├── travels
│ └── _content.yaml
├── products
│ └── _content.hugo
Each _content file should contain a Hugo readable version of an array of entries where each entry is an object containing the following:
destination*: A string. Can either be in the form of a slug (ex: my-web-page) in which case the filepath will be deducted or a full filepath with extension /books/city-on-a-hill.md.
data: An object. This will be printed as the Front Matter of the entry.
body: A string. This will be printed as the entry's body (below front matter)
To generate the mardown files form the main project's directory:
hugo -s _prebuild
☝️ Where "_prebuild" is the directory of your prebuild Hugo project.
Settings are added to the project's parameter under the tnd_data map as shown below. Here are an example of the available keys set with their defaults.
# config.yaml
params:
tnd_data:
data_file_basenames: _content
fm_format: json
quiet: falseDefaults to _content.
If the file cannot be called _content.* for a given project, use this setting to set the basename the module should look for.
Defaults to json.
Available formats are json, yaml, toml.
The markdown files generated by the module are meant to be fed to Hugo, so the poor readability of minified JSON should'nt be a problem. But for debugging purposes it might be useful to generate more "readable" markdown files. This allow the user to use yaml or toml for the generated files' Front Matter.
Defaults to false.
By default the module will print a detailed list of all the files generated by a given _content file. Setting quiet to true will limit to log to each _content files treated.
From /posts/_content.json: 1,000 files
- posts/ante-and-11-at-nulla.md
- posts/nisl-and-49-at-in.md
- posts/justo-and-47-at-nec.md
- posts/nisl-and-48-at-sapien.md
- posts/quam-and-41-at-felis.md
- ...
Here is an example of a very basic books/_content.json file containing an array of books.
/books/data.json:
[
{
"destination": "my-first-book",
"data": {
"title": "My firt Book"
}
},
{
"destination": "/not-book-dir/somewhere-else.md",
"data": {
"title": "My second book"
},
"body": "Donec id elit non mi porta gravida at eget metus. Aenean eu leo quam. \nPellentesque ornare sem [lacinia](/here) quam venenatis vestibulum. Donec sed odio dui. \nCras mattis consectetur purus sit amet fermentum. Sed posuere consectetur est at lobortis."
}
]So with the file example above, the module will print two files in its public directory:
The first one at /public/books/my-first-book.md:
{"title":"My firt Book"}
The second one at /public/not-book-dir/somewhere-else.md:
{"title":"My second book"}
Donec id elit non mi porta gravida at eget metus. Aenean eu leo quam.
Pellentesque ornare sem [lacinia](/here) quam venenatis vestibulum. Donec sed odio dui.
Cras mattis consectetur purus sit amet fermentum. Sed posuere consectetur est at lobortis.
The above is fine for ready to use data. But if you need to format a tier produced data with the appropriate keys expected by the module, or use the powerful resources.GetRemote to fetch the data from an API, you'll need more power.
You can use a _content.hugo file which will at as a returning partial and return an array. The module will then process it in order to generate markdown files.
{{/* /travels/_content.hugo */}}
{{ $travels := slice }}
{{ range site.Data.travels }}
{{ $travel := dict
"destination" .slug_string
"data" .metadata
"body" .contentMD
}}
{{ $travels = $travels | append $travel }}
{{ end }}
{{ return $travels}}
{{/* /monsters/_content.hugo */}}
{{ $monsters := slice }}
{{ with resources.GetRemote "https://monsters-api.netlify.app/?v=2" }}
{{ with .Content | unmarshal }}
{{ range . }}
{{ $monster := dict
"destination" .id
"data" (dict
"title" .title
"img" .img
)
"body" .content
}}
{{ $monsters = $monsters | append $monster }}
{{ end }}
{{ end }}
{{ end }}
{{ return $monsters }}
If the extension is ommited, the string will be treated as a slug and the destination is detucted using the latter and the directory where the _content file is located.
If an extension is included, the module will use the string as is and skip the deduction logic.
Ex: From a blog/_content.yaml file, the entry with destination: "travels/trip-in-belize" will be saved at blog/travels/trip-in-belize.md while another entry from the same file with destination: "americas/trip-in-belize.md" will be saved at /americas/trip-in-belize.md
The module is agnostic on the kind of file created. With a destination containing a .json extension and a data object your file can be published and mounted as a data file. Just make sure your _content file returns an array even if you only need one file!
For example from a _content.hugo file which could but — does not have to — live at the root of your main project's content directory.
{{ $data := dict }}
{{ with resource.GetRemote "/api/global/data/" }}
{{ with .Content | unmarshal }}
{{ $data = dict
"destination" "data/settings.json"
"data" .
}}
{{ end }}
{{ end }}
{{ return slice $data }}
And the new mounting setting, still on the main project:
# /config.yaml
module:
mounts:
[...]
- source: _prebuild/public/data
target: dataWe understand that your IDE might not really know what to do with files ending in .hugo.
For this reason the module will also read _content files ending with the .html extension.
But as Hugo will choke on Go Template syntax inside its content directory, you will need to make use of the ignoreFiles settings to exclude you HTML data files from the main project's content directory.
# /config.yaml
ignoreFiles:
- '\_content.html$'It is wise to use --cleanDestinationDir when building the prebuild project to ensure deleted entries are not kept in its public directory. TBut there is a current bug in Hugo wich ignores this flag if a static directory is not present in the project. You can solve this by simply adding a _prebuild/static/.keep file.
This project is maintained and loved by thenewDynamic.