EZBoard Klipper Stuff

This repo contains files and information for our EZBoards for use with Klipper.

This is to help you get started using Klipper on your EZBoard quick by providing example configurations for the EZBoards as well as pre-compiled firmware BIN files for them.

NOTE: Klipper is for advanced Users ONLY. We do not recommend using Klipper if you are a beginner.

These are provided AS-IS with no support or guarantee from TH3D Studio LLC.

What is Klipper?

Klipper is an advanced, tweaking firmware that is complex to setup and use (when compared to Marlin/Unified 2). You are welcome to use whatever firmware you wish on our boards but we only support our Unified 2 Firmware on them when it comes to what our included Technical Support covers at no cost due to the complexity of Klipper and the stack of software required to use it.

Pre-Compiled BIN Files

We've also provided pre-compiled BIN files to flash your boards so you don't have to use SSH + WinSCP to get the firmware.bin files. These files will be kept up to date on a best effort basis. You will still need to connect in via SSH to get your board ID and we recommend KIAUH to get that with the Advanced Menu (option 4) and then Get MCU ID (option 5) over USB (option 1).

Klipper doesn't change the core board firmware much so this shouldn't be a big issue. If you find that our pre-compiled BIN files are out of date please Contact Us to have them updated.

Paid Klipper Support

If you wish to get help setting up Klipper on your control board and/or SBC we do have paid remote support services available. You can get in touch with our support team here: Contact Us

Free Klipper Support

Our TH3D Discord server is a great place to get free help with Klipper in general. You can join it here: Discord.TH3DStudio.com

Setting up your SBC

For setting up your SBC we recommend KIAUH to set it up on a standard Linux installation.