tevino / wg-make

:pushpin: A tool to help set up WireGuard based networks. Currently, it generates configurations for peers according to a single configuration file.

📌 wg-make

wg-make is a tool to help set up WireGuard based networks. Currently, it generates configurations for peers according to a single network description file.

├── networks
│   └── example.conf         <- What you create
└── peers                    <- What wg-make generates for you
    ├── Agu
    │   └── wg-example.conf  <- WireGuard configurations for the peer 
    ├── Pata
    │   └── wg-example.conf
    └── Tento
        └── wg-example.conf

Features

• Generated configuration files for every peer with comments
• Setting and restoring packet forwarding rules for the firewall (e.g. iptables)
• Setting and restoring kernel parameters
• Local network awareness
• Support for multiple networks

wg-make enables you to:

• Version control the configurations of your networks
• Have an overview of your network in a single file

wg-make saves you from:

• Keeping track of different versions of configuration files on peers
• Considering how to set correct AllowedIPs for peers in different network environments
• Collecting configuration fragments from existing peers to set up a peer

Usage

1. Download the latest release of wg-make from here then install with install wg-make /usr/bin

2. Create a working directory for wg-make(e.g. mkdir ~/wg-make), all configurations will be in here

3. Generate an example network by running wg-make -example in the directory created

4. Modify the example network description file (~/wg-make/networks/example.conf) to your needs, there are rich comments for every field in it

5. Run wg-make -clean to generate WireGuard configuration files reflecting your changes

6. Copy the generated configurations from peers to peers' /etc/wireguard/ then (re)start WireGuard (e.g. systemctl restart wg-quick@wg-YOU_NETWORK_NAME)

Network Desctiption File

Here is the example network description file.

The following may look like a lot, but most of the fields have the same meaning as the WireGuard's configuration, in other words, you already know them.

Feel free to submit an issue if you are not sure about the definition of some fields.

# This is an example of the Network Description File, it defines a network you are going to create with WireGuard.
# With this single description file, wg-make generates configurations for all peers
# so you only need to install WireGuard and copy the configuration file(s) to the peer and everything just works.
#
# NOTE: Settings without special instructions are mandatory.

[Network]
# The ID of the network will be the suffix of the WireGuard interface name.
ID = "example"
# The subnet that contains all peers' addresses, this will be added into AllowedIPs for bounce servers.
Subnet = 192.168.25.0/24

# The Peer section is the combination of [Interface] and [Peer] in the WireGuard configuration file plus some extended settings.

# NOTE: Customizing number of the routing table is not supported for the moment.

# This is a client peer.
[Peer]
# The name of the peer, must be unique across networks.
ID = Tento
# The WireGuard IP Address of the peer.
Address = 192.168.25.55/32
# The subnets in which the peer already resides.
# This is useful when a peer is at the same subnet with a bounce server who's relaying the traffic(See AllowedIPs for a bounce server) to the subnet,
# in this case, setting this can avoid local subnet from being routed to the WireGuard interface, optional.
LocalSubnets = 10.1.1.0/24
# PrivateKey of the peer, could be generated with:
# prik=$(wg genkey); pubk=$(echo "$prik" | wg pubkey); echo -e "PrivateKey = $prik\nPublicKey = $pubk"
PrivateKey = private-key-of-tento
# PublicKey of the peer, could be generated like above.
PublicKey = public-key-of-tento
# Add this if THIS PEER is behind a NAT(no public IP), optional.
PersistentKeepalive = 25


# The peer acting as a server, relaying traffic for client peers.
[Peer]
ID = Pata
Address = 192.168.25.1/32
PrivateKey = private-key-of-pata
PublicKey = public-key-of-pata
#
# This Peer is a bounce server.
# The following settings are only for bounce servers, all optional.
#
# Port to listen.
ListenPort = 49736
# A publicly accessible address for other remote peers.
# The port number is mandatory, it could be different from the ListenPort.
Endpoint = pata.example.com:49736
# A range of the IPs or subnets that the bounce server is capable of routing traffic for.
AllowedIPs = 10.1.1.0/24
#
# NOTE: Omit the following two settings if you don't want WireGuard to change packet forwarding rules. (e.g. sysctl and iptables)
#
# Name of the network interface connecting to the Internet, used for adding packet forwarding rules.
PublicInterface = eth0
# Operating System, used to decide how to enable packet forwarding.
OS = Linux


# Another client behind NAT.
[Peer]
ID = Agu
Address = 192.168.25.15/32
LocalSubnets = 192.168.1.0/24
PrivateKey = private-key-of-agu
PublicKey = public-key-of-agu
PersistentKeepalive = 5

TODO

• Validate network description files and WireGuard configuration files