telit / arduino-me310-library

code library for arduino projects using ME310G1 devices (for example on Charlie Board)

ME310G1 / Charlie official communication library for Arduino

Code library for Arduino projects using ME310G1 devices (for example, on Charlie Board )

Contents

This Library will provide a set of APIs wrapping the AT commands to simplify the interaction with the ME310G1 device.

Classes

The library provides the following classes:

• ME310 : main class providing all the functionalities, the only needed for users' code
• Parser : internal helper classes to simplify the AT command responses parsing
• PathParsing : internal helper class to parse the file paths on the device
• ATCommandDataParsing : internal class used to call Parser

Examples

The following examples are available:

• AGNSS_example : Simple example that shows how to configure the AGNSS functionality
• Bosch_sensor_example : Shows how to retrieve info from the onboard Bosch BMA400 accelerometer
• CheckModule : Turns the modem on and checks if it responsive
• CLIP_example : Shows how to use Calling Line Identifier protocol
• FTP_example : Connects to an FTP server and performs basic operations
• GNSS_example : Simple GNSS example, it enables the GNSS receiver and provides raw location data
• Hello_World_example : Basic Hello World example
• LWM2M_example : uses LwM2M protocol and the accelerometer to send data to the OneEdge portal
  • LWM2M_example_2G : example with 2G network
  • LWM2M_example_4G : example with 4G network
• LWM2M_first_example : uses LwM2M to create a simple connection to OneEdge portal and pushes accelerometer data showing basic resources operations
• LWM2M_Get_Object_example : uses LwM2M GET OBJ functionality to access a whole object with single calls
• M2M_example : Communicates with the modem using the M2M commands to manage the filesystem
• ME310_AT_Test : Communicates with the modem and provides info about it (ICCID, IMEI etc.)
• MQTT_example : Communicate with a MQTT broker
• Ping_example : Simple example that enables the connectivity and pings a server
• Socket_example : Enables connectivity and uses a TCP socket example communicating with a demo server
• Sleep_mode_example : Shows how to configure sleep modes on the board
• TransparentBridge : Enable the modem and creates a bridge between Arduino serial and modem AT interface, allowing user to send AT commands manually
• GenericCommand_example : Shows how to send AT commands to the modem manually and manage the response (useful for complex AT commands or chains of commands)

Support

If you need support, please open a ticket to our technical support by sending an email to:

• [e-mail] if you are in the Americas region
• [e-mail] if you are in EMEA region
• [e-mail] if you are in APAC

providing the following information:

• module type
• answer to the commands (you can use the TrasparentBridge example to communicate with the modem)
  • AT#SWPKGV
  • AT+CPIN?
  • AT+CCID
  • AT+CGSN
  • AT+CGDCONT?

and add [Charlie][AppZone] in the e-mail object, and in the e-mail body refer to the opened issue on github.